555 Type, Timer/Oscillator (Single) IC 100kHz 8-PDIP NE555 DIP-8 through hole The NE555P is a classic and widely used precision timer IC manufactured by companies like Texas Instruments and others. It belongs to the popular 555 timer family and is designed for generating accurate time delays, oscillations, and pulse signals. The “P” variant refers to the PDIP (Plastic Dual In-line Package), making it ideal for through-hole mounting, breadboarding, and prototyping. NE555P PDIP-8 timer Internally, the NE555P consists of: Two comparators A flip-flop A discharge transistor A voltage divider network These blocks allow flexible configuration for timing and waveform generation. Key Features Timing & Operation Modes Monostable mode (one-shot pulse generation) Astable mode (continuous oscillator) Bistable mode (flip-flop operation) Electrical Characteristics Supply voltage range: 4.5V to 16V Output can source or sink up to 200 mA Adjustable duty cycle Performance High timing accuracy and stability Timing range from microseconds to hours (depends on external R and C) Temperature-stable operation Package & Usability 8-pin DIP (through-hole) package Easy to use for: Breadboards DIY electronics Educational projects Common Applications LED flashers and blinkers Pulse generation Time delay circuits PWM control (e.g., dimming LEDs, motor speed control) Tone/sound generation #Timer #commonpartslibrary

Decoder/Driver Single 4-to-7 16-Pin PDIP Box #commonpartslibrary #integratedcircuit #powermanagement #displaydriver #leddriver

Phase Lock Loop (PLL) IC 2.4MHz 1 16-DIP (0.300", 7.62mm) CD4046BE is a CMOS Micropower Phase-Locked Loop (PLL) integrated circuit that combines a linear Voltage-Controlled Oscillator (VCO), two phase comparators, a source follower, and a Zener diode in a single package. It is designed for frequency synthesis, frequency detection, FM demodulation, clock recovery, motor speed control, and other synchronization applications. The device operates over a wide supply voltage range and offers low power consumption, high noise immunity, and excellent VCO linearity. Key Features Wide operating supply voltage range: 3 V to 18 V Integrated Voltage-Controlled Oscillator (VCO) Two selectable phase comparators for flexible PLL design Operating frequency range up to approximately 1.4 MHz Very low power consumption High VCO linearity (typically <1%) Low frequency drift with temperature VCO inhibit control for ON/OFF keying applications Built-in source follower output for demodulation applications High noise immunity characteristic of CMOS technology Available in 16-pin PDIP (CD4046BE) package Typical Applications Frequency synthesis and multiplication FM modulation and demodulation Frequency discrimination Clock recovery and data synchronization Tone decoding Voltage-to-frequency conversion FSK modulation/demodulation Motor speed control systems Signal tracking and phase synchronization circuits Hashtags #CD4046BE #PLL #PhaseLockedLoop #VCO #ClockRecovery #FrequencySynthesizer #FMDemodulator #FSKModulation #CMOS #TexasInstruments #AnalogIC #TimingIC #SignalProcessing #EmbeddedSystems #ElectronicsDesign

Schottky TTL; Ten-four input NAND gate; 16-Lead PDIP; 7 V; 1mA; 2V; 0.8V #commonpartslibrary #integratedcircuit #decoder

PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 1.75KB (1K x 14) FLASH 18-PDIP The Microchip PIC16F84A-20I/P features 1K × 14 words of Flash program memory, 68 bytes of RAM, and 64 bytes of EEPROM data memory. It operates with a supply voltage range of 2.0 V to 5.5 V and supports an external clock frequency of up to 20 MHz. The device provides 13 bidirectional I/O pins and includes a Timer0 8-bit timer/counter with prescaler, as well as interrupt capability. It uses a 14-bit instruction set architecture and integrates serial programming support. The MCU is supplied in an 18-pin PDIP package and is specified for an industrial temperature range of −40°C to +85°C. #PIC16F84A #Microchip #8bitMCU #EmbeddedController #PICMicrocontroller

Inverter 6-Element CMOS 14-Pin PDIP Tube #commonpartslibrary #integratedcircuit #inverter

MPU 8-Bit 14MHz 65KB Memory 40 Pin PDIP #commonpartslibrary #integratedcircuit #microprocessor

DIP762W60P254L730H430Q6N https://www.vishay.com/docs/83606/cny17.pdf Vishay, CNY17-2 DC Input Transistor Output Optocoupler, Through Hole, 6-Pin PDIP 4.3 Vishay CNY17-2 782-CNY17-2 https://www.mouser.co.uk/ProductDetail/Vishay-Semiconductors/CNY17-2?qs=mWFvmKOfYW%252B6V%252BsymgXzNQ%3D%3D CNY17-2 https://www.arrow.com/en/products/cny17-2/vishay?region=europe

Low-Side Gate Driver IC Non-Inverting 8-PDIP MOSFET Gate Driver for driving power MOSFETs and other capacitive loads. Operates from a 4.5V to 18V supply and provides 6A peak source/sink output current with high-speed switching. Features a single non-inverting driver in an 8-pin PDIP (CPA) package. #MOSFETGateDriver #GateDriver #SingleChannel #6A #4.5Vto18V #NonInverting #PDIP8 #Microchip

Dual 4-to-1 Data Selector/Multiplexer – Dual independent 4-channel to 1-channel data selector/multiplexer with common address select inputs and individual active-low enable (strobe) inputs. Operates from a 2 V to 6 V supply, features typical 9 ns propagation delay, ±6 mA output drive at 5 V, CMOS-compatible inputs, and supports parallel-to-serial data conversion and cascading. Housed in a 16-pin PDIP package and specified for an operating temperature range of −40°C to +85°C. #TexasInstruments #SN74HC153N #SN74HC153 #Multiplexer #DataSelector #DualMultiplexer #4To1Multiplexer #CMOSLogic #DigitalLogic #ParallelToSerial #PDIP16 #EmbeddedSystems

Audio Amplifier 2 Circuit 8-PDIP Dual High-Performance Audio Operational Amplifier providing low-noise, low-distortion signal amplification for precision audio and analog applications. It operates from ±2.5 V to ±17 V (5 V to 34 V total supply), features 2.7 nV/√Hz input noise density, 55 MHz gain-bandwidth product, 20 V/µs slew rate, and is housed in an 8-pin PDIP package. #DualOpAmp #AudioAmplifier #OperationalAmplifier #LowNoise #LowDistortion #55MHz #20Vus #PDIP8 #TexasInstruments

Asynchronous Communications Interface Adapter (ACIA) – Serial communication interface IC designed for 8-bit microprocessor systems, embedded computers, industrial controllers, terminals, modems, and legacy communication equipment. The Western Design Center W65C51N6TPG-14 provides a simple interface between an 8-bit CPU and serial communication devices, handling the conversion between parallel CPU data and asynchronous serial data. It operates at 5 V, supports communication speeds up to 14 MHz, and uses a 28-pin PDIP through-hole package. #WesternDesignCenter #W65C51N #W65C51N6TPG14 #ACIA #SerialCommunication #InterfaceIC #8BitProcessor #EmbeddedSystems #IndustrialElectronics #ThroughHole #PDIP28

LINE RECEIVER, BALANCED, 1240, DIP8 Balanced line receiver IC designed for precision differential signal reception in balanced audio applications. The THAT1240P08-U provides 0 dB gain, operates from ±3 V to ±18 V supplies, and features 90 dB typical CMRR (60 Hz), >8.6 MHz typical bandwidth, 12 V/µs typical slew rate, 0.0006% typical THD, and 2 mA typical supply current in an 8-pin PDIP package. #BalancedLineReceiver #DifferentialAmplifier #AudioIC #PrecisionAmplifier #HighCMRR #PDIP8 #THATCorporation

LIN Transceiver with Voltage Regulator, 3.3V, PDIP LIN transceiver regulator DIP*W7.62mm*

Dual Rail-to-Rail Operational Amplifier IC – Dual general-purpose CMOS operational amplifier with rail-to-rail input and output for signal conditioning, sensor interfaces, active filters, data acquisition, battery-powered devices, and embedded systems. Operates from a 2.5 V to 5.5 V single supply, featuring a 10 MHz gain-bandwidth product, 7 V/µs slew rate, 500 µV maximum input offset voltage (typical), 1 pA typical input bias current, and 30 mA output drive per channel. Designed for low-power operation with a 1 mA typical supply current per amplifier, it offers high input impedance, stable unity-gain performance, and rail-to-rail operation for maximizing dynamic range in low-voltage applications. Specified for operation over a −40°C to +85°C industrial temperature range and housed in an 8-pin PDIP through-hole package. #Microchip #MCP6022IP #MCP6022 #OperationalAmplifier #OpAmp #RailToRail #CMOSAmplifier #SignalConditioning #SensorInterface #ActiveFilter #EmbeddedSystems #PDIP8

The Texas Instruments CD4049UB and CD4050B are a family of CMOS Hex Inverting Buffers and Converters that feature logic-level conversion using only one supply voltage (Vcc). The CD4049UB variant offers inverting buffers, whereas the CD4050B provides noninverting buffers. Both devices are capable of driving two TTL loads directly, thanks to their high sink current capabilities. They are designed for high-to-low level logic conversion, CMOS to DTL or TTL Hex Converters, and can also serve as CMOS current sink or source drivers. These components are tested for quiescent current at 20 V and ensure a maximum input current of 1 µA at 18 V over the full package temperature range, with a significant reduction to 100 nA at 18 V and 25°C, making them suitable for power-sensitive applications. With 5-V, 10-V, and 15-V parametric ratings, they offer flexible options for various design requirements. The CD4049UB and CD4050B are provided in a variety of package options including PDIP, SOIC, and TSSOP, catering to a wide range of assembly and application scenarios.

VU Meter Dot/Bar Display Driver IC – 10-step analog level display driver for audio VU meters, signal strength indicators, battery level monitors, power meters, and instrumentation displays. Features a logarithmic response matched to human hearing, driving 10 LEDs, LCDs, or vacuum fluorescent (VF) displays in either dot or bar mode. Operates from a single 3 V to 25 V supply, includes an adjustable 1.2 V to 12 V precision voltage reference, and provides programmable constant-current LED outputs (typically 2 mA to 30 mA) without requiring external current-limiting resistors. Supports 70 dB display range, expandable multi-device cascading for higher resolution, and offers fast analog response for real-time level indication. Specified for operation over a 0°C to +70°C temperature range and housed in an 18-pin PDIP package. This device is obsolete/Lifetime Buy and is not recommended for new designs. #TexasInstruments #LM3916N1NOPB #LM3916 #VUDriver #BarGraphDriver #DotBarDisplay #LEDDriver #AudioMeter #LevelIndicator #DisplayDriver #PDIP18 #EmbeddedSystems