Single-channel high-side N-channel smart power switch for power distribution, supporting a 6 V to 18 V load voltage and up to 11 A continuous output current. Features 8.8 mΩ typical ON resistance, non-inverting ON/OFF control, and integrated overcurrent, overvoltage, short-circuit, and undervoltage lockout (UVLO) protection. Specified for operation over a −40°C to +150°C junction temperature range and housed in a PG-TSDSO-14-22 (14-pin TSSOP exposed pad) package. #Infineon #BTS70081EPPXUMA1 #SmartPowerSwitch #HighSideSwitch #LoadSwitch #PowerDistribution #PROFET #NChannel #11A #PowerManagement #AutomotiveElectronics #TSDSO14

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

P-Channel 30V 15A (Tc) 6.8W (Tc) Surface Mount 8-SOIC The SQ4435EY-T1_GE3 is an automotive-grade P-Channel enhancement-mode TrenchFET® power MOSFET from Vishay Siliconix. It is designed for efficient high-side load switching and power management applications, offering low on-resistance, fast switching performance, and excellent thermal reliability. Qualified to AEC-Q101, this MOSFET is suitable for demanding automotive and industrial environments. It is housed in a compact SO-8 surface-mount package, making it ideal for space-constrained designs. Key Features P-Channel enhancement-mode TrenchFET® MOSFET 30 V drain-to-source voltage (VDS) 15 A continuous drain current (TC = 25°C) Low RDS(on): 18 mΩ max @ VGS = -10 V 31 mΩ max @ VGS = -4.5 V AEC-Q101 qualified for automotive applications Operating junction temperature: -55°C to +175°C Low conduction losses for improved power efficiency Fast switching characteristics 100% Rg and UIS tested RoHS compliant and halogen-free Compact SO-8 surface-mount package Typical Applications Automotive high-side load switches Battery management systems (BMS) DC-DC converters Power distribution switches Motor control circuits Industrial power management Reverse battery protection #Vishay #SQ4435EY #PChannelMOSFET #TrenchFET #PowerMOSFET #Automotive #AECQ101 #HighSideSwitch #PowerManagement #DCDC #BatteryManagement #SO8 #IndustrialElectronics #LowRDSon #SurfaceMount

Power Switch/Driver 1:1 N-Channel 500mA PowerSSO-12 8-channel protected high-side 12 V output switch IC The VNI2140J is a monolithic device designed using STMicroelectronics' VIPower technology. The device drives two independent resistive or inductive loads with one side connected to ground. Active current limitation prevents a drop in system power supply in cases of shorted-load, and built-in thermal shutdown protects the chip from damage due to overtemperature and short-circuit. In overload conditions, channel turns OFF and ON automatically to maintain the junction temperature between TTSD and TR. If the case temperature reaches TCSD, the overloaded channel is turned OFF and restarts only when case temperature decreases down to TCR. In order to avoid high-peak current from the supply, when more than one channel is overloaded the TCSD restart is not simultaneous. Non overloaded channels continue to operate normally. The open-drain diagnostics output indicates overtemperature conditions and open-load in OFF-state. Features • Nominal current: 0.75 A per channel • Shorted-load protections • Junction overtemperature protection • Case overtemperature protection for thermal independence of the channels • Thermal case shutdown restart not simultaneous for the various channels • Protection against loss of ground • Current limitation 1 A per channel • Undervoltage shutdown • Open-load in OFF-state and short to VCC detection • Open-drain diagnostic outputs • 3.3 V CMOS/TTL compatible inputs • Fast demagnetization of inductive loads • Conforms to IEC 61131-2 Applications • Programmable logic control • Industrial PC peripheral input/output • Numerical control machines #VNI2140J #STMicroelectronics #VIPower #HighSideSwitch #SolidStateRelay #PowerManagement #IndustrialAutomation #PLC #LoadDriver #PowerSSO12

Power Distribution Switches TPS27S100BRRKT VQFN-16_L4.0-W3.5-P0.50-BL-EP LCSC Part Number: C1849488 TPS27S100 / TPS27S100A / TPS27S100B – single-channel smart high-side power switch with integrated NMOS and charge pump, designed for industrial, automation, telecom, and programmable logic controller (PLC) applications. Supports operating voltages from 3.5 V to 40 V and load currents up to 4 A. Features adjustable current limiting, integrated diagnostics, current monitoring, overload protection, short-circuit protection, thermal shutdown, undervoltage lockout (UVLO), inductive load clamping, and extensive ESD/surge immunity. Available with either digital fault reporting or analog current-sense output for intelligent load management and system protection. Search Keywords: TPS27S100, TPS27S100A, TPS27S100B, Smart High Side Switch, High Side Power Switch, Industrial Load Switch, Protected Load Driver, Current Sense Switch, Industrial Power Distribution, PLC Output Driver, High Side Driver IC, NMOS High Side Switch, Adjustable Current Limit Switch, Short Circuit Protection Switch, Overload Protected Switch, Industrial Automation Power Switch, 24V Load Driver, Telecom Power Switch, Diagnostic Power Switch, Texas Instruments TPS27S100 Hashtags: #TPS27S100 #TPS27S100A #TPS27S100B #TexasInstruments #HighSideSwitch #SmartSwitch #LoadDriver #PowerSwitch #CurrentSense #IndustrialAutomation #PLC #IndustrialControl #TelecomElectronics #PowerDistribution #CircuitProtection #EmbeddedSystems #ElectronicsDesign #PCBDesign #IndustrialElectronics #PowerManagement

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

Automotive Smart High-Side Power Switch – Single-channel N-channel smart high-side power switch for automotive power distribution and wire harness protection. Operates from a 4.1 V to 28 V supply (2.75 V minimum during cranking), supports a 15.7 A nominal load current, and features an ultra-low 3.6 mΩ typical RDS(on). Includes adjustable overcurrent protection (24 A to 137.5 A), integrated I²t wire protection, analog current sensing, open-load detection (ON/OFF state), short-circuit protection, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), overtemperature protection, slew-rate control, and logic-level control input. Qualified to AEC-Q100 and ISO 26262-compliant, it operates over a −40°C to +150°C junction temperature range and is housed in a 14-pin PG-TSDSO exposed-pad package. #Infineon #BTG7003A1EPWXUMA1 #PROFET #HighSideSwitch #SmartPowerSwitch #Automotive #PowerDistribution #LoadDriver #CurrentSense #WireProtection #AECQ100 #ISO26262 #EmbeddedSystems

Single-channel high-side N-channel load switch for power distribution, supporting an input voltage range of 1.0 V to 5.5 V and up to 3 A continuous output current. Features 25 mΩ typical ON resistance, controlled slew rate, quick output discharge (150 Ω), thermal shutdown protection, and a non-inverting ON/OFF control input. Housed in a 4-pin UQFN-HR (0.85 × 0.75 mm) package. #TexasInstruments #TPS22991 #TPS22991BRAAR #LoadSwitch #PowerSwitch #HighSideSwitch #PowerManagement #PMIC #NChannel #3A #LowRon #UQFN4 #EmbeddedSystems

Power Switch/Driver 1:1 N-Channel 2A PG-TSDSO-14 BTG7090-2EPL High-side power switch designed to provide protected high-side load switching with diagnostic functions for automotive power distribution applications. It features two independent 2 A channels, operates from a 3 V to 28 V supply range, offers 90 mΩ typical RDS(on), adjustable overcurrent limitation up to 4.34 A, analog current sense, digital diagnostics, capacitive load switching mode, and is housed in a PG-TSDSO-14 package. #HighSideSwitch #SmartPowerSwitch #PROFET #LoadSwitch #AutomotiveElectronics #PowerDistribution #DualChannel #CurrentSense #Diagnostics #PGTSDSO14 #Infineon

Power Switch/Driver 1:1 P-Channel 2A SOT-23-5 The GLF1100 is an ultra-efficiency, 2 A rated, Load Switch with integrated slew rate control. The best in class efficiency makes it an ideal chose for use in IoT, mobile, and wearable electronics. The GLF1100 features ultra-efficient IQSmartTM technology that supports the lowest quiescent current (IQ) and shutdown current (ISD) in the industry. Low IQ and ISD solutions help designers to reduce parasitic leakage current, improve system efficiency, and increase battery lifetime. The GLF1100 integrated slew rate control can also enhance system reliability by mitigating bus voltage swings during switching events. Where uncontrolled switches can generate high inrush currents that result in voltage droop and/or bus reset events, the GLF slew rate control specifically limits inrush currents during turn-on to minimize voltage droop. GLF1100 Load Switch devices support an industry leading wide input voltage range and helps to improve operating life and system robustness. Furthermore, one device can be used in multiple voltage rail applications which helps to simplify inventory management and reduce operating cost. FEATURES • Wide Input Range: 1.1 V to 5.5 V 6 V abs max • RON : 82 mΩ Typ @ 5.5 VIN • IOUT Max: 2 A • Ultra-Low IQ: 10 nA Typ @ 5.5 VIN • Ultra-Low ISD: 25 nA Typ @ 5.5 VIN • Controlled Rise Time: 2.2 ms at 3.3 VIN • Internal EN Pull-Down Resistor • Integrated Output Discharge Switch • Wide Operating Temperature Range: -40 °C ~ 85 °C • HBM: 6 kV, CDM: 2 kV APPLICATIONS • Telecommunication Module • Low Power Subsystem • Mobile Devices #commonpartslibrary #integratedcircuit #powermanagement #LoadSwitch #PowerManagement #PMIC #HighSideSwitch #LowPower #BatteryPowered #PortableElectronics #GLFIntegratedPower #SOT23 #PowerDistribution

AC-DC Controllers & Regulators TPS4H160AQPWPRQ1 HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-BL-EP LCSC Part Number: C485918 TPS4H160-Q1 or equivalent 4-channel smart high-side switch TPS4H160-Q1 – automotive-grade quad-channel smart high-side switch with four integrated 160 mΩ NMOS power switches. Designed for controlling resistive, capacitive, and inductive loads in 12 V, 24 V, and 48 V automotive systems. Provides comprehensive diagnostics, programmable current limiting, current sensing, thermal shutdown, short-circuit protection, open-load detection, and loss-of-ground/loss-of-battery protection. Functional safety capable and AEC-Q100 qualified for safety-critical automotive applications such as body control modules, ADAS, displays, and power distribution systems. Search Keywords: TPS4H160-Q1, TPS4H160, Automotive High Side Switch, Smart High Side Switch, Quad Channel High Side Driver, Automotive Power Switch, AEC-Q100 Switch, Current Sense Switch, Protected Power Switch, Load Driver IC, Automotive Load Switch, NMOS High Side Driver, Body Control Module Driver, ADAS Power Distribution, Diagnostic Power Switch, Functional Safety Switch, Short Circuit Protected Switch, Inductive Load Driver, Automotive Power Management, Texas Instruments TPS4H160 Hashtags: #TPS4H160Q1 #TPS4H160 #TexasInstruments #HighSideSwitch #SmartSwitch #AutomotiveElectronics #AECQ100 #FunctionalSafety #CurrentSense #LoadDriver #PowerDistribution #BodyControlModule #ADAS #AutomotivePower #ProtectedSwitch #IndustrialElectronics #EmbeddedSystems #ElectronicsDesign #PCBDesign #AutomotiveDesign