Part Data Review and Verification
Worked for 2 mins 44 sec
Completed the part review and created Part Verification Report. The existing Datasheet URL was already set, pinout and SO-8 footprint matched the Vishay datasheet, and the only cleanup items found were unspecified terminal pin types/descriptions plus a minor MPN separator difference (
_ vs -).Suggested next steps:
- Set explicit Source/Gate/Drain pin descriptions and pin types.
- Normalize the MPN to the manufacturer ordering format if desired.
- Add key electrical specs as searchable part properties.
Set explicit Source, Gate, and Drain pin descriptions and electrical pin types.
Thought for 9 sec
I’ll update the eight terminal properties so each pin has an explicit Source/Gate/Drain description and an appropriate MOSFET electrical pin type, then verify the schematic properties.
Worked for 29 sec
Updated and verified all eight terminal properties.
- Pins 1–3: Source terminal, Pin Type Passive
- Pin 4: Gate control input, Pin Type Input
- Pins 5–8: Drain terminal, Pin Type Passive
No open items.
Finalize part library
Add specs properties
Normalize MPN
Run consistency check
Export part package
Name
Pin #
Type
Part Type
Pin Description
Terminal Order
S_1
1
Passive
Terminal
Source terminal
S_2
2
Passive
Terminal
Source terminal
S_3
3
Passive
Terminal
Source terminal
G
4
Input
Terminal
Gate control input
D_1
5
Passive
Terminal
Drain terminal
D_2
6
Passive
Terminal
Drain terminal
D_3
7
Passive
Terminal
Drain terminal
D_4
8
Passive
Terminal
Drain terminal
SQ4435EY-T1_GE3
