Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

Low-Noise Low-Dropout (LDO) Voltage Regulator – Fixed 3.0 V positive-output LDO regulator providing up to 300 mA output current for low-noise power regulation. Operates from a 1.6 V to 6.0 V input voltage, features 140 mV maximum dropout voltage at 300 mA, 15 µA typical quiescent current, 65 dB to 40 dB PSRR (100 Hz to 1 MHz), and an enable input for power management. Includes overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for an operating junction temperature range of −40°C to +125°C and housed in a 5-pin SOT-23 (DBV) package. #TexasInstruments #TPS7A2030PDBVR #LDO #VoltageRegulator #LowDropout #300mA #3V #LowNoise #PowerManagement #SOT23 #EmbeddedSystems #PMIC

Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

Voltage supervisor, designed to monitor the supply voltage and generate a reset signal when the monitored voltage falls below the specified threshold. The TLV840MADL29DBVR features a 2.9 V fixed threshold, manual reset (MR) input, active-low reset output, and is housed in a 5-pin SOT-23 (DBV) package, making it suitable for supply-voltage monitoring and reset generation in microprocessor and digital systems. #TexasInstruments #TLV840MADL29DBVR #VoltageSupervisor #ResetSupervisor #PowerMonitoring #VoltageMonitor #ActiveLowReset #ManualReset #SOT23 #DBV #PCB #Electronics #ComponentLibrary

Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-23-5 Single non-inverting tri-state buffer with a 3-state output, designed to buffer or isolate digital logic signals in automotive applications. It operates from a 4.5 V to 5.5 V supply, accepts TTL-compatible input levels, features an active-low output enable (OE), supports drive capability up to ±8 mA, and is specified for operation over a –40°C to +125°C temperature range in a SOT-23 (DBV) package. #LogicBuffer #TriStateBuffer #Automotive #AHCT #SingleGate #SOT23 #TexasInstruments

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT-23-5 The TPS7A20 is an ultra-small, low-dropout (LDO) linear regulator that can source 300mA of output current. The TPS7A20 is designed to provide low noise, high PSRR, and excellent load and line transient performance that can meet the requirements of RF and other sensitive analog circuits. Using innovative design techniques, the TPS7A20 offers an ultra-low noise performance without the addition of a noise bypass capacitor. The TPS7A20 also provides the advantage of low quiescent current, which can be ideal for battery-powered applications. With an input voltage range of 1.6V to 6.0V and an output range of 0.8V to 5.5V, the TPS7A20 can be used for a wide variety of applications. The device uses a precision reference circuit to provide a maximum accuracy of 1.5% over load, line, and temperature variations. The TPS7A20 features an internal soft-start to lower the inrush current, thus minimizing the input voltage drop during start up. The device is stable with small ceramic capacitors, allowing for a small overall solution size. The TPS7A20 has a smart enable input circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps eliminate the external components used to pulldown the EN pin • Low output voltage noise: 7μVRMS – No noise-bypass capacitor required • High PSRR: 95dB at 1kHz • Very low IQ: 6.5μA • Input voltage range: 1.6V to 6.0V • Output voltage range: 0.8V to 5.5V • Output voltage tolerance: ±1.5% (max) • Very low dropout: – 140mV (max) at 300mA (VOUT = 3.3V) – 145mV (max) at 300mA (VOUT = 3.3V, DBV) • Low inrush current • Smart enable pulldown • Stable with 1µF minimum ceramic output capacitor • Packages: – 1mm × 1mm X2SON (DQN) – 0.616mm × 0.616mm DSBGA (YCK) – 0.612mm × 0.612mm DSBGA (YCJ) – 2.9mm × 2.8mm SOT23-5 (DBV) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

Linear Voltage Regulators (LDO) TLV75518PDBVR SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C2877863 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TLV755P low-dropout linear voltage regulator, 500mA output current, 1.45V to 5.5V input voltage range, fixed output voltage options from 0.6V to 5V, low 25µA typical quiescent current, 238mV max dropout at 500mA, 1% output accuracy, 46dB PSRR at 100kHz, stable with 1µF ceramic output capacitor, built-in soft-start, foldback current limit, active output discharge, thermal shutdown and undervoltage lockout protection, available in SOT-23-5, X2SON-4 and WSON-6 packages. Search Keywords: TLV755P, Texas Instruments TLV755P, TI TLV755P, TLV755P LDO, TLV755P regulator, TLV755P 500mA, TLV755P low dropout regulator, TLV755P low Iq, TLV755P 1.45V to 5.5V, TLV755P fixed output regulator, TLV755P SOT-23-5, TLV755P DBV, TLV755P DYD, TLV755P DQN, TLV755P DRV, TLV755P WSON-6, TLV755P X2SON-4, TLV755P datasheet Hashtags: #TLV755P #TexasInstrumentsTLV755P #TILDO #LDORegulator #LowDropoutRegulator #500mALDO #LowIqLDO #FixedOutputLDO #TLV755PDBV #TLV755PDYD #TLV755PDQN #TLV755PDRV #SOT235 #X2SON4 #WSON6 #ActiveOutputDischarge #FoldbackCurrentLimit #ThermalShutdown

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 LP2985IM5-2.7 is a low-dropout (LDO) linear voltage regulator designed to provide a stable 2.7 V output with very low quiescent current and excellent noise performance. It is optimized for battery-powered and noise-sensitive applications, offering high power supply rejection ratio (PSRR) and fast transient response. The device is housed in a compact SOT-23-5 package, making it ideal for space-constrained designs. Key Features Fixed 2.7 V output voltage Low dropout voltage Low quiescent current (IQ) High PSRR for noise-sensitive applications Stable with low ESR ceramic capacitors Thermal shutdown and current limit protection Small SOT-23-5 package RoHS compliant Electrical Characteristics Output Voltage: 2.7 V (fixed) Output Voltage Accuracy: ±1.5% (typical) Maximum Output Current: 150 mA Dropout Voltage: ~280 mV at 150 mA (typical) Quiescent Current (IQ): ~65 µA (typical) Line Regulation: 0.04%/V (typical) Load Regulation: 0.2% (typical) PSRR: Up to 70 dB (at low frequency) Operating Input Voltage Range: 2.5 V to 16 V Operating Temperature Range: -40°C to +125°C Mechanical Characteristics Package Type: SOT-23-5 (DBV) Mounting Type: Surface Mount Pin Count: 5 pins Approximate Dimensions: 2.9 mm × 1.6 mm Pin Configuration (Typical) IN: Input voltage GND: Ground OUT: Regulated output (2.7 V) EN: Enable (active high) BYPASS: Noise reduction / bypass capacitor connection Performance Characteristics Excellent output noise performance (low-noise design) Fast transient response to load changes Stable with small ceramic capacitors (typically 1 µF) Suitable for RF and analog circuits Applications Battery-powered devices Portable electronics RF and wireless modules Sensors and analog circuits Microcontroller power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement #voltage-regulator #LDO #LP3985

Buck Switching Regulator IC Positive Adjustable 0.6V Output 2A SC-74A, SOT-753 The Texas Instruments TLV62569DBVR is a high-efficiency synchronous step-down (buck) DC-DC converter designed for compact and low-power applications. It converts a higher DC input voltage down to a lower, regulated output voltage with high efficiency and small external component size. It is commonly used in portable electronics, embedded systems, routers, set-top boxes, and battery-powered devices where efficient power conversion and small footprint are important. 🔧 Key Features Input voltage range: 2.5 V to 5.5 V Output current capability: up to 2 A Adjustable output voltage: 0.6 V to VIN (via external resistors) High efficiency: up to ~95% Switching frequency: ~1.5 MHz (allows small inductors/capacitors) Synchronous rectification: improves efficiency by reducing losses Power Save Mode (PSM): boosts efficiency at light load Low quiescent current: ~35 µA typical 100% duty cycle support: low dropout operation 🛡️ Protection & Safety Features Overcurrent protection (OCP) Thermal shutdown protection Internal soft-start (reduces inrush current at startup) Power Good (PG) indicator for system monitoring 📦 Package SOT-23-5 (DBVR) Very small footprint for space-constrained PCB designs ⚙️ Typical Applications Point-of-load (POL) power supplies Wireless routers and networking devices Set-top boxes Battery-powered and portable systems Embedded controllers and IoT devices