USB Type-C USB 2.0 Receptacle Connector – Right-angle USB Type-C receptacle designed for consumer electronics, industrial controllers, IoT devices, embedded systems, charging equipment, portable products, and USB-enabled communication interfaces. The Same Sky (formerly CUI Devices) UJ20-C-H-G-SMT-2-P16-TR features a 24-contact (16 active + 8 dummy) USB Type-C interface supporting USB 2.0 data rates up to 480 Mbps. It is rated for 48 VDC, with 5 A on VBUS power contacts, 1.25 A on VCONN contacts, and 0.25 A on signal contacts. Designed with a surface-mount, right-angle configuration plus through-hole retention tabs, it provides enhanced mechanical strength for repeated cable insertion. Features include gold-plated contacts, shielded steel shell (SUS304), UL94 V-0 housing, 10,000 mating cycles, and an operating temperature range of −25°C to +85°C, making it ideal for reliable power and data connectivity in compact embedded designs. #SameSky #UJ20CHGSMT2P16TR #USBTypeC #USB20 #USBConnector #TypeCReceptacle #BoardToCable #SurfaceMountConnector #EmbeddedSystems #IndustrialElectronics #IoT #ConsumerElectronics

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

FFC/FPC Connector – 24-position right-angle FFC/FPC connector with 0.5 mm pitch for board-to-cable connections. Features a back-lock actuator, dual top and bottom contacts, surface-mount termination, 0.5 A per contact current rating, 250 VAC dielectric withstand voltage, 100 mΩ maximum contact resistance, and 1,000 MΩ minimum insulation resistance. Designed with a 1.0 mm low-profile height and supports 20 mating cycles. #PanasonicIndustry #AYF532435 #Y5B #FFCConnector #FPCConnector #BoardToCable #0_5mmPitch #24Position #BackLock #SurfaceMount #LowProfileConnector #EmbeddedSystems

Connector Header Through Hole, Right Angle 2 position The AT13-2P-BM01 is a rugged 2-position right-angle PCB mount receptacle from Amphenol Sine Systems' AT Series BoardLock™ connector family. Designed for harsh-environment applications, it features gold-plated male contacts, a flange-mount design, and an IP67-rated sealed interface when mated. This connector is ideal for automotive, industrial, off-road, agricultural, marine, and heavy equipment applications where reliable board-to-cable connections are required. It supports through-hole solder mounting and is compatible with AT06-2S mating plugs. Key Features: 2-position right-angle PCB mount receptacle Through-hole solder termination BoardLock™ flange-mount design for secure PCB attachment Gold-plated copper alloy contacts for excellent conductivity and corrosion resistance Rated for 13 A current and 250 V voltage IP67 sealing (when mated) for dust and water resistance Operating temperature: -55°C to +125°C Durable thermoplastic housing with silicone rubber seals Designed for harsh automotive and industrial environments Compatible with AT06-2S AT Series plug connectors #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardLock #PCBConnector #RightAngleConnector #AutomotiveConnector #IndustrialConnector #IP67 #ThroughHole #FlangeMount #GoldPlated #HarshEnvironment #Electronics #BoardToCable

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) - Power Only 6 Pin Position Surface Mount, Right Angle; Through Hole The 2479774-2 specification defines the engineering requirements for a high-density electronic connector assembly intended for board-to-cable or board-to-board interconnection in advanced electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable signal transmission, stable mechanical engagement, and long-term durability in demanding electronic applications. The component is intended for use in systems requiring compact interconnect solutions with high signal integrity and robust mechanical retention. It is suitable for applications such as industrial electronics, communication systems, embedded control units, and high-performance electronic assemblies where reliable connectivity and repeatable mating performance are required. Engineering Requirements The connector assembly shall be manufactured using precision-formed conductive materials and high-strength insulating housing materials to ensure stable electrical performance and mechanical reliability. The design shall support secure mating engagement and consistent signal continuity across repeated connection cycles. Electrical characteristics shall ensure low contact resistance, stable signal integrity, and reliable conductivity under defined operating conditions. The connector shall maintain performance under mechanical vibration, thermal variation, and environmental stress conditions typical of industrial and embedded system applications. Mechanical construction shall ensure accurate alignment between mating interfaces, secure locking engagement, and resistance to accidental disconnection. The design shall support repeated mating cycles without degradation of electrical or mechanical performance. Workmanship shall be free from defects such as contamination, deformation, plating irregularities, or structural inconsistencies that could impact reliability or functionality. Manufacturing and inspection shall be conducted under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, connector datasheets, material declarations, inspection records, qualification test reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #Connector #HighDensityInterconnect #ElectronicComponents #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #Manufacturing #QualityAssurance #EngineeringDocumentation

Headers & Wire Housings PICOFLEX 10P HDR LOPRO SN Connector Header Through Hole 10 position 0.050" (1.27mm) The 0903250010 is a 10-position vertical through-hole header connector from the Picoflex PF-50 series by Molex. It features a 1.27 mm pitch, straight orientation, and is designed for reliable board-to-cable interconnections in compact electronic equipment. The connector is commonly used with Picoflex ribbon cable assemblies in industrial, consumer, telecommunications, and embedded electronic applications. It provides a space-saving solution while maintaining dependable electrical and mechanical performance. Key Features 10 contacts (single-row configuration) 1.27 mm (0.050") contact pitch Vertical (straight) through-hole mounting Male header design Compatible with Molex Picoflex cable connectors Current rating up to 1.2 A per contact Voltage rating up to 250 V Operating temperature range: -40°C to +105°C Low contact resistance (15 mΩ max) High insulation resistance (1000 MΩ min) RoHS compliant Compact footprint for high-density PCB designs Suitable for signal and low-power applications #CommonPartsLibrary #0903250010 #Molex #Picoflex #Connector #HeaderConnector #ThroughHole #PCBConnector #BoardToCable #Interconnect #Electronics #EmbeddedSystems #IndustrialElectronics #RibbonCable #1_27mmPitch #ElectronicComponents

8 Position FFC, FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle The Molex Easy-On connector is a compact surface-mount FPC/FFC interconnect solution designed for reliable board-to-cable connections in space-constrained electronic systems. Featuring a bottom-contact configuration with a flip-lock actuator, it provides secure retention of flexible printed circuits while supporting repeated insertion and removal cycles. Its low-profile construction and robust locking mechanism make it suitable for consumer electronics, industrial controls, embedded systems, displays, and portable devices where dependable signal transmission and compact form factors are required. Engineering Specifications Manufacturer: Molex Series: Easy-On FD19 Part Number: 2005280080 Connector Type: FFC/FPC Connector Contact Configuration: Bottom Contact Actuator Type: Flip-Lock ZIF Mounting Style: Surface Mount Orientation: Right Angle Circuit Count: Eight Positions Pitch: One Millimeter Cable Type: Flexible Flat Cable / Flexible Printed Circuit Contact Material: Copper Alloy Contact Finish: Gold over Nickel Housing Material: High-Temperature Thermoplastic Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Halogen Free: Yes Application Areas: LCD Interfaces, Touch Panels, Embedded Electronics, Industrial Equipment, Portable Devices, Consumer Electronics #Molex #EasyOn #FD19 #FFCConnector #FPCConnector #FlipLock #BottomContact #ZIFConnector #SMTConnector #ElectronicComponents #Interconnect #PCBDesign #EmbeddedSystems #DisplayInterface #IndustrialElectronics

25 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle FPC/FFC connector for board-to-cable interconnection, featuring a 25-position, 0.5 mm pitch, right-angle, bottom-contact, front-flip locking design compatible with 0.3 mm thick FPC/FFC cables. It is rated for 50 V DC and 0.5 A, with 200 Vrms dielectric withstand voltage (1 minute) and an operating temperature range of −40 °C to +85 °C. #KYOCERAAVX #FFCConnector #FPCConnector #BoardToBoard #RightAngleConnector #BottomContact #FrontFlipLock #05mmPitch #25Position #ElectronicComponents

FFC/FPC Connector – 30-position right-angle FFC/FPC connector with 1.00 mm pitch for board-to-cable interconnection. Features bottom contacts, Zero Insertion Force (ZIF) slider actuator, surface-mount solder termination, 0.5 A current rating per contact, 50 V voltage rating, and 3.00 mm mated height. Includes gold-plated phosphor bronze contacts, tin-plated solder tails, nylon housing, solder retention, and supports up to 30 mating cycles. Specified for operation over a −40°C to +85°C temperature range with a UL94 V-0 flammability-rated housing. #Molex #0522713069 #EasyOn #FFCConnector #FPCConnector #ZIFConnector #30Position #1_0mmPitch #BottomContact #SurfaceMount #BoardToCable #EmbeddedSystems

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

USB 2.0 Type-A Stacked Receptacle – Dual USB 2.0 Type-A right-angle receptacle for board-to-cable USB connections. Features 8 contacts (2 × 4), through-hole PCB mounting, 1.5 A current rating per port, 30 V operating voltage, 20 mΩ maximum contact resistance, 1 GΩ minimum insulation resistance, and 750 VAC dielectric withstand voltage. Includes selective gold-plated copper alloy contacts, a nickel-plated brass shell, and supports 1,500 mating cycles. Specified for operation over a −40°C to +105°C temperature range. #WurthElektronik #61400826021 #WRCOM #USB2_0 #USBTypeA #DualUSB #StackedUSB #RightAngleConnector #ThroughHole #USBConnector #EmbeddedSystems