802.15.4, Bluetooth, WiFi 802.11b/g/n/ac/ax, Bluetooth v5.0, Thread, Zigbee® Transceiver Module 2.412GHz ~ 2.484GHz, 5.18GHz ~ 5.885GHz Antenna Not Included Surface Mount RF wireless module integrating the ESP32-C5 SoC for Wi-Fi, Bluetooth LE, and IEEE 802.15.4 connectivity. Operates from a 3.0 V to 3.6 V supply and features a 32-bit RISC-V processor with 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), IEEE 802.15.4, 8 MB flash, 8 MB PSRAM, and an external antenna connector (U.FL/IPEX) for wireless communication. #RFModule #WiFi6 #BluetoothLE #IEEE802154 #ESP32C5 #RISCV #QFNModule

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 + EDR, Class 1, 2 and 3 Transceiver Module 2.4GHz PCB Trace Surface Mount Wi-Fi + Bluetooth module designed for wireless connectivity in embedded applications, integrating the ESP32 dual-core 32-bit LX6 microprocessor with 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth v4.2 BR/EDR + BLE. It operates from a 3.0 V to 3.6 V supply, features 8 MB SPI flash and 2 MB PSRAM, and provides multiple peripheral interfaces including UART, SPI, I²C, I²S, SD/SDIO, PWM, ADC, DAC, CAN (TWAI®), and Ethernet MAC. #WiFiModule #BluetoothModule #ESP32 #Espressif #2_4GHz #BluetoothLE #BluetoothBR_EDR #DualCore #Embedded #IoT #SPIFlash #PSRAM #UART #SPI #I2C #I2S #SDIO #PWM #ADC #DAC #TWAI #EthernetMAC

ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Antenna Not Included Surface Mount The ESP32-C3 is a low-power, highly integrated 32-bit microcontroller (MCU) from Espressif Systems that combines 2.4 GHz Wi-Fi and Bluetooth® 5 Low Energy (BLE) connectivity in a single chip. Built around a single-core RISC-V processor running at up to 160 MHz, it is designed for secure, cost-effective IoT and embedded applications. The ESP32-C3 offers excellent wireless performance, low power consumption, robust security features, and a rich set of peripherals, making it ideal for smart home devices, industrial automation, wearable electronics, wireless sensors, and consumer IoT products. Key Features 32-bit RISC-V single-core CPU running up to 160 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 LE Low-power architecture with multiple sleep modes for battery-powered devices Advanced security features including Secure Boot, Flash Encryption, AES, SHA, RSA, HMAC, and hardware random number generator (RNG) Rich peripheral set including GPIO, UART, SPI, I²C, I²S, PWM, ADC, TWAI (CAN), USB Serial/JTAG, and timers Supports external QSPI flash memory and OTA (Over-the-Air) firmware updates Compact package options suitable for space-constrained embedded designs Fully supported by the ESP-IDF, Arduino, and MicroPython development ecosystems #ESP32C3 #Espressif #RISCV #WiFi #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessMCU #LowPower #SmartHome #IndustrialIoT #SecureMCU #EdgeComputing #FirmwareDevelopment

Bluetooth, WiFi 802.11b/g/n/ax, Bluetooth v5.4 Transceiver Module 2.4GHz Integrated, Chip Surface Mount Silicon Labs SiWG917 module is our lowest power Wi-Fi 6 plus Bluetooth LE 5.4, ideal for ultra-low power IoT wireless devices using Wi-Fi®, Bluetooth, Matter, and IP networking for secure cloud connectivity. It is optimal for developing battery operated devices that need long battery life. SiWG917 module includes an ultra-low power Wi-Fi 6 plus Bluetooth Low Energy (LE) 5.4 wireless CPU subsystem, and an integrated micro-controller (MCU) application subsystem, security, peripherals and power management subsystem all in a single 16 x 21.1 x 2.3 mm package. The wireless subsystem consists of a multi-threaded Network Wireless Processor (NWP) running up to 160 MHz, baseband digital signal processing, analog front end, 2.4 GHz RF transceiver and integrated power amplifier. The application subsystem consists of an ARM® Cortex®-M4 running up to 180 MHz, embedded SRAM, flash, ultra-low power sensor hub, and matrix vector processor. The ARM® Cortex®-M4 is dedicated for peripheral and application-related processing, while the NWP runs the wireless and networking stacks on independent threads, thus providing a fully integrated solution that is ready for a wide range of embedded wireless IoT applications. The modules come with modular radio type approvals for various countries, including USA (FCC), Canada (IC/ISED) and Japan (MIC), and are in compliance with the relevant EN standards (including EN 300 328 v2.2.2) for the conformity with the directives and regulations in EU and UK. KEY FEATURES • Wi-Fi 6 Single Band 2.4 GHz 20 MHz 1x1 stream IEEE 802.11 b/g/n/ax • Bluetooth LE 5.4 • Single chip Matter Over Wi-Fi Solution • ARM® Cortex® M4 Processor with FPU subsystem up to 180 MHz with rich set of Digital and Analog Peripherals. • Wi-Fi 6 Benefits: TWT for improved efficiency and longer battery life, MUMIMO/OFDMA for Higher Throughput, network capacity and low latency • Best in Class Device and Wireless Security • WLAN Tx power up to +17.5 dBm with integrated PA • Bluetooth LE Tx power up to +17 dBm with integrated PA • WLAN Rx sensitivity as low as -95.5 dBm • Wi-Fi 4 Standby Associated mode current: 71 μA @ 1-second listen interval • Embedded Flash option up to 8 MB/ optional external Flash up to 16 MB • Embedded PSRAM option up to 2 MB/ optional external PSRAM option up to 16 MB • Ultra-low power sensor hub peripherals • Matrix Vector Processor (MVP) • Embedded Wi-Fi, Bluetooth LE, Matter, and networking stacks supporting wireless coexistence • Three software-configurable MCU application memory options for sharing the RAM between the wireless, system, and application (192/256/320 KB) • Operating temperature: -40 to +85 ºC • Operating supply range: 3.0 to 3.63 V • Supply voltage for GPIOs: 1.71 to 3.63 V #WiFi6 #BluetoothLE54 #IoTModule #WirelessSoC #SiliconLabs #EmbeddedSystems #SmartHome #IndustrialIoT #LowPowerDesign #RFModule #ConnectedDevices #EdgeComputing #MatterReady #PCBDesign #ElectronicsEngineering

20.5dBm ESP32-C3 Chip 2.4GHz VFQFN-32-EP WiFi Modules ROHS RF Transceiver ICs ESP32-C3-WROOM-02-N4 BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB LCSC Part Number: C2934560 Espressif ESP32-C3-WROOM-02 wireless MCU module, based on ESP32-C3 32-bit RISC-V single-core processor up to 160MHz, supports 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0 with Bluetooth mesh, 4MB or 8MB SPI flash options, 384KB ROM, 400KB SRAM and 8KB RTC SRAM, up to 15 GPIOs, SPI, UART, I2C, I2S, LED PWM, USB Serial/JTAG, ADC, timers and watchdogs, integrated 40MHz crystal oscillator, 3.0V to 3.6V supply voltage, on-board PCB antenna, RoHS/REACH compliant, 18.0 x 20.0 x 3.2mm module size. Search Keywords: ESP32-C3-WROOM-02, ESP32-C3-WROOM-02-N4, ESP32-C3-WROOM-02-H4, ESP32-C3-WROOM-02-N8, Espressif ESP32-C3-WROOM-02, ESP32-C3 WiFi Bluetooth module, ESP32-C3 RISC-V module, WiFi BLE 5 module, 802.11bgn module, Bluetooth mesh module, ESP32-C3 PCB antenna module, ESP32-C3 4MB flash module, ESP32-C3 8MB flash module Hashtags: #ESP32C3WROOM02 #ESP32C3WROOM02N4 #ESP32C3WROOM02H4 #ESP32C3WROOM02N8 #EspressifESP32C3 #ESP32C3 #WiFiBluetoothModule #WiFiModule #BluetoothLEModule #BLE5Module #RISCVMCU #IoTModule #PCBantenna #80211bgn

WiFi Modules ESP32-S3-MINI-1-N4R2 BULETM-SMD_ESP32-S3-MINI-1-N8 LCSC Part Number: C3013941 JLCPCB Part Class: Extended Part Manufactured by ESPRESSIF Espressif ESP32-S3-MINI-1/1U Wi-Fi and Bluetooth LE MCU module based on ESP32-S3, dual-core 32-bit Xtensa LX7 processor up to 240MHz, supports 2.4GHz Wi-Fi and Bluetooth LE, 8MB Quad SPI flash, optional 2MB Quad SPI PSRAM, up to 80MHz SPI flash clock, integrated low-power co-processor, -40°C to +85°C operating temperature, compact SMD module for IoT, smart home, embedded systems and wearable electronics; ESP32-S3-MINI-1 includes PCB antenna, ESP32-S3-MINI-1U supports external antenna connector. Search Keywords: ESP32-S3-MINI-1, ESP32-S3-MINI-1U, ESP32-S3-MINI-1-N8, ESP32-S3-MINI-1-N4R2, ESP32-S3-MINI-1U-N8, ESP32-S3-MINI-1U-N4R2, Espressif ESP32-S3-MINI, ESP32-S3 WiFi Bluetooth module, ESP32-S3 BLE module, ESP32-S3 MCU module, ESP32-S3-MINI 8MB flash, ESP32-S3-MINI 2MB PSRAM, ESP32-S3-MINI PCB antenna, ESP32-S3-MINI external antenna, ESP32-S3-MINI-1U antenna connector, ESP32-S3 SMD module, ESP32-S3 IoT module, ESP32-S3-MINI datasheet Hashtags: #ESP32S3MINI1 #ESP32S3MINI1U #ESP32S3MINI1N8 #ESP32S3MINI1N4R2 #ESP32S3MINI1UN8 #ESP32S3MINI1UN4R2 #Espressif #ESP32S3 #ESP32Module #WiFiModule #BluetoothLEModule #BLEModule #MCUModule #IoTModule #SMDModule #PCBantenna #ExternalAntenna #XtensaLX7 #8MBFlash #2MBPSRAM