Welcome to your new project. Imagine what you can build here.

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw terminal 3-pin 5.08mm Through Hole #connector #terminalblock #tht

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw Terminal 3-pin 5.08mm Through Hole #CommonPartsLibrary #Connector #Terminal-block #COMBICON MKDSN

LUXEON C Royal Blue LED 440nm-460nm Lumileds L1C1-RYL1000000000 Blue LED, 440 460 nm 3-Pin, Dome Lens SMD package #LED

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

Lumileds L1C1-CYN1000000000 Cyan LED, 490 510 nm 3-Pin, Dome Lens SMD package #LED

1.35A 3.3V LDO Reg. Current Limit SOT223 DiodesZetex AZ1117CH-3.3TRG1, LDO Voltage Regulator, 0.8A, 3.3 V +/-1%, maximum of 15 Vin, 3-Pin SOT-223 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO #AZ1117C

Ultra-Low-Power Voltage Supervisor (Reset IC) – Single-channel voltage supervisor designed for microcontrollers, processors, IoT devices, industrial control systems, automotive electronics, battery-powered equipment, and embedded systems requiring reliable power-on reset and brownout detection. The Texas Instruments TLV803EA30DBZR monitors a 3.0 V supply rail with a 3.08 V reset threshold, providing an active-low open-drain RESET output to ensure proper system initialization and recovery during undervoltage conditions. Features 250 nA typical quiescent current, 130 ms minimum reset timeout, supply voltage operation from 0.7 V to 6 V, and open-drain output for easy interfacing with multiple voltage domains. Includes power-on reset, brownout protection, and low-power operation, making it ideal for energy-efficient embedded applications. Operates over a −40°C to +125°C temperature range and is housed in a compact 3-pin SOT-23 (DBZ) package for surface-mount designs. #TexasInstruments #TLV803EA30DBZR #TLV803E #VoltageSupervisor #ResetIC #PowerOnReset #BrownoutDetection #LowPower #OpenDrain #PowerManagement #EmbeddedSystems #IndustrialElectronics

Ceramic Resonator 12MHz +/-0.5% (Tol) +/-0.2% (Stability) 33pF 30Ohm Automotive 3-Pin CSMD T/R #CommonPartsLibrary #Crystal #Oscillator #Resonator #CERALOCK® CSTNE

3pin Constant Current 20mA LED Driver, SOT89 CC LED Driver High Voltage SOT?89*

3 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.200" (5.08mm) Through Hole Screw Terminal (3-pin, 5.08 mm) Terminal Block 3 Position 5.08mm Horizontal Screw_Terminal_01x03 TerminalBlock

RD3P175SNFRATL ROHM 35V 6A, Dual Diode, 3-Pin DPAK RB095BGE-30TL ROHM Semiconductor RB095BGE-30TL 755-RB095BGE-30TL DIODE ARRAY SCHOTT 30V 6A TO252 Diode Array 1 Pair Common Cathode 30 V 6A Surface Mount TO-252-3, DPak (2 Leads + Tab), SC-63

Ultra-Low-Power Omnipolar Hall-Effect Switch – Digital omnipolar Hall-effect switch optimized for lid/door detection, proximity sensing, magnetic position detection, industrial controls, consumer electronics, and battery-powered embedded systems. Operates from a 1.65 V to 5.5 V supply with an ultra-low 3 µA maximum supply current, making it ideal for low-power applications. Features a push-pull digital output, omnipolar operation (responds to either north or south magnetic poles), sleep mode, and high magnetic sensitivity with ±3 mT typical operate point and ±0.8 mT typical release point. Supports up to 5 mA output current, provides built-in hysteresis for noise immunity, and operates over a −40°C to +125°C temperature range. Housed in a compact 3-pin SOT-23 (DBZ) surface-mount package. #TexasInstruments #TMAG5231C1DQDBZR #TMAG5231 #HallEffectSensor #OmnipolarSwitch #MagneticSensor #PositionSensor #ProximitySensor #LowPower #BatteryPowered #SOT23 #EmbeddedSystems

Vishay SQD40N06-14L_GE3 N-channel MOSFET Transistor, 40 A, 60 V, 3-Pin TO-252

The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485 signals. Operating as a half-duplex transceiver, the TP8485E enables unidirectional communication, spanning distances of up to 1200 meters. This breakout board is engineered for efficiency, consuming power from a single 5V or 12VDC power source. Its RS-485 output is facilitated through 3-pin terminals for both signal wires and power connections. These features collectively make it an ideal choice for robust data transmission across extensive distances and in challenging, high-noise environments.

Connector Header Board Edge, Through Hole, Right Angle 48 position The 0366380003 is a wire-to-board connector component from Molex, typically used in power and signal connections between wires and a printed circuit board (PCB). Type: Wire-to-board connector housing (crimp style) Positions: 3 circuits (3-pin connector) Pitch: Typically ~3.68 mm (series dependent) Mounting: Cable-side housing (mates with PCB header) Locking mechanism for secure connection #CommonPartsLibrary #Connector #Header #CMC 36638

Connector Header Surface Mount, Right Angle 3 position 0.047" (1.20mm) The BM03B-ACHSS-GAN-TF(LF)(SN) is a compact surface-mount (SMD) right-angle header connector from JST’s ACH series. It is designed for wire-to-board connections in space-constrained electronic devices. This component features a 3-position (3-pin) male header with a 1.2 mm pitch, making it suitable for high-density PCB layouts where small size and reliable connectivity are required. It is commonly used in consumer electronics, embedded systems, and industrial devices where compact interconnections are needed. Key Features Connector Type: Rectangular header (male pins) Mounting Type: Surface-mount (SMD), right-angle orientation Number of Positions: 3 pins Pitch: 1.2 mm (fine pitch for compact designs) Current Rating: Up to 2 A Voltage Rating: 50 V Contact Plating: Gold-plated contacts (good conductivity & corrosion resistance) Material: Heat-resistant thermoplastic, UL94V-0 rated Operating Temperature: −25 °C to +85 °C Locking Mechanism: Detent lock for secure mating Design: Shrouded (3-wall) for alignment and protection Packaging: Tape & reel (ideal for automated assembly)