JST XH Connector Header Through Hole 2 position 0.098" (2.50mm) B2B-XH-A(LF)(SN) is a 2-position, 2.50 mm pitch, through-hole shrouded male PCB header from the JST XH Series. It is designed for reliable wire-to-board connections in consumer electronics, industrial equipment, power supplies, battery packs, and embedded systems. The connector features a polarized shrouded housing to prevent incorrect mating and supports secure, dependable electrical connections with easy PCB assembly. Key Features: 2-position wire-to-board header 2.50 mm contact pitch Through-hole (THT) PCB mounting Straight vertical orientation Shrouded housing with polarization to prevent misalignment Rated for up to 3 A current and 250 V AC/DC Tin-plated brass contacts for reliable conductivity Operating temperature range: -25°C to +85°C Compatible with JST XH Series crimp housings and terminals Ideal for power and signal connections in compact electronic assemblies. #JST #XHSeries #PCBHeader #WireToBoard #Connector #ThroughHole #THT #ShroudedHeader #2Position #25mmPitch #Electronics #EmbeddedSystems #IndustrialElectronics #PowerConnector #PCBDesign

JST PH SMD Connector Header Surface Mount, Right Angle 2 position 0.079" (2.00mm) The S2B-PH-SM4-TB(LF)(SN) is a surface-mount, 2-position wire-to-board header connector from the JST PH series. It is designed for compact and reliable connections in low-current, signal, and power applications. With a 2.0 mm pitch and secure friction-lock mechanism, this connector ensures stable mating with corresponding PH series crimp housings. The connector features side-entry (horizontal) orientation and solder tabs for enhanced PCB retention, making it suitable for automated assembly and high-vibration environments. Key Features 2-position connector (2 circuits) 2.0 mm pitch spacing Surface-mount, right-angle (side entry) configuration Friction-lock mechanism for secure mating Solder hold-down tabs for mechanical stability Compact, low-profile design Compatible with JST PH series housings and terminals Tape & reel packaging for automated assembly Mechanical Characteristics Mounting Type: Surface Mount (SMT) Orientation: Right Angle (Side Entry) Pitch: 2.0 mm Number of Positions: 2 Mating Type: Friction lock Board Retention: Solder tabs (SM4 type) Electrical Characteristics Rated Current: 2 A (per contact, AWG #24) Rated Voltage: 100 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 100 MΩ Withstanding Voltage: 800 VAC/minute Material Specifications Insulator: Polyamide (Nylon), UL94V-0 rated Contact Material: Copper alloy Contact Plating: Tin over nickel (Sn plating) Environmental Specifications Operating Temperature Range: -25°C to +85°C Storage Temperature: -40°C to +85°C Packaging Information Packaging Type: Tape & Reel (TB suffix) Lead-Free: Yes (LF) Surface Finish: Tin plating (SN) Compatible Components Mating Housing: JST PH series (e.g., PHR-2) Crimp Terminals: SPH-002T-P0.5S or equivalent Typical Applications Consumer electronics Battery connections Signal and low-power connections Embedded systems and IoT devices Portable and compact electronic assemblies #commonpartslibrary #connector #header #tht

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

JST PH Connector Header Through Hole 2-pin 0.079" (2.00mm) battery connector JST PH 2 pin The B2B-PH-K-S is a 2-position vertical header connector with a 2.0 mm pitch, designed for mating with JST PH series crimp housings (e.g., PHR-2). It is commonly used in consumer electronics, battery connections, and small embedded systems due to its compact size and secure locking mechanism. Key Features Series: JST PH Series Number of Pins: 2 Pitch: 2.0 mm Mounting Type: Through-hole (vertical) Contact Type: Male pin header Mating Type: Friction lock (secure connection) Current Rating: ~2 A (typical, depends on wire and conditions) Voltage Rating: ~100 V Contact Material: Copper alloy (tin-plated) Housing Material: UL94V-0 rated plastic (flame-retardant) Operating Temperature: Typically -25°C to +85°C Typical Applications Battery connectors (Li-ion/LiPo packs) Power supply connections in small devices Embedded systems (e.g., Arduino, sensors) Consumer electronics (fans, LEDs, small appliances) #CommonPartsLibrary #Connector #Header #JST-PH

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

Connector Header Through Hole, Right Angle 2 position The AT13-2P-BM01 is a rugged 2-position right-angle PCB mount receptacle from Amphenol Sine Systems' AT Series BoardLock™ connector family. Designed for harsh-environment applications, it features gold-plated male contacts, a flange-mount design, and an IP67-rated sealed interface when mated. This connector is ideal for automotive, industrial, off-road, agricultural, marine, and heavy equipment applications where reliable board-to-cable connections are required. It supports through-hole solder mounting and is compatible with AT06-2S mating plugs. Key Features: 2-position right-angle PCB mount receptacle Through-hole solder termination BoardLock™ flange-mount design for secure PCB attachment Gold-plated copper alloy contacts for excellent conductivity and corrosion resistance Rated for 13 A current and 250 V voltage IP67 sealing (when mated) for dust and water resistance Operating temperature: -55°C to +125°C Durable thermoplastic housing with silicone rubber seals Designed for harsh automotive and industrial environments Compatible with AT06-2S AT Series plug connectors #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardLock #PCBConnector #RightAngleConnector #AutomotiveConnector #IndustrialConnector #IP67 #ThroughHole #FlangeMount #GoldPlated #HarshEnvironment #Electronics #BoardToCable

5 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) Vertical Through Hole PCB terminal block connector for wire-to-board power and signal connections, featuring a 2-position configuration with 5.08 mm pitch, through-hole mounting, and screw-clamp wire termination. It is rated for 320 V, 16 A, and accepts 28–12 AWG (0.2–2.5 mm²) conductors. #TerminalBlock #PCBConnector #WireToBoard #ThroughHole #ScrewClamp #2Position #5.08mmPitch #16A #320V #PhoenixContact

2 Position Header, Male Blades Connector Solder 0.295" (7.50mm) Through Hole, Right Angle 46007-1102 0460071102 is a 2-position right-angle PCB header from the Molex Sabre power connector family, designed for high-current wire-to-board power applications. It features a 7.50 mm pitch, through-hole mounting, and a shrouded housing for secure mating and enhanced safety. The connector is commonly used in power supplies, industrial equipment, appliances, and other systems requiring reliable high-power connections. It is glow-wire capable and complies with UL1977 finger-proof access requirements. Key Features 2-circuit male header from the Molex Sabre series 7.50 mm pitch power connector Right-angle through-hole PCB mounting Shrouded and polarized design for secure mating Locking ramp retention feature Tin-plated brass contacts Nylon housing with UL94V-0 flammability rating Glow-wire capable for appliance applications Operating temperature range: -40°C to +105°C Supports wire-to-board power connections Complies with UL1977 finger-proof safety requirements #CommonPartsLibrary #Connector #Molex #SabreConnector #PowerConnector #WireToBoard #PCBHeader #RightAngleConnector #ThroughHole #IndustrialElectronics #PowerDistribution #HighCurrentConnector

TERM BLOCK HDR 2POS 5.08mm Pluggable terminal block header for board-to-wire power and signal connections, featuring 2 positions, 5.08 mm pitch, right-angle through-hole mounting, and an open-header design. Rated for 300 V and 15 A, with an operating temperature range of -40°C to +105°C. #PluggableTerminalBlock #TerminalBlockHeader #2Position #5.08mmPitch #RightAngle #ThroughHole #300V #15A #BoardToWire #Connector

Connector Header Through Hole 2 position 0.100" (2.54mm) Male pin header for board-to-board or cable interconnection, featuring 2 positions in a single-row, 2.54 mm (0.100") pitch through-hole breakaway design. Rated for 3 A current, with phosphor bronze square contacts, gold-plated mating contacts, tin-plated solder tails, and an operating temperature range of -65°C to +125°C. #MaleHeader #PinHeader #BoardToBoard #ThroughHole #BreakawayHeader #2Position #2p54mmPitch #3A #SullinsConnectorSolutions #Connector

Connector Header Through Hole 2 position 46999-0138 Mini-Fit Jr. vertical header connector designed for board-to-wire connections, featuring a 2-position, dual-row through-hole configuration with male pins. It has a 4.20 mm pitch, shrouded 4-wall housing, tin-plated contacts, and supports up to 600 V AC/DC voltage rating with current capability dependent on wire size and circuit configuration. #Molex #0469990138 #MiniFitJr #HeaderConnector #ThroughHoleConnector

The 532610271 is a Molex PicoBlade series wire-to-board connector header designed for compact electronic applications requiring reliable low-profile signal connections. It is a 2-position, single-row, surface-mount (SMT), right-angle header with a 1.25 mm pitch, commonly used in small consumer electronics, embedded systems, battery-powered devices, and compact PCB interconnects. This part belongs to the Molex PicoBlade (53261 series) family, which is optimized for high-density board-to-wire connections in space-constrained designs. Key Features Manufacturer: Molex Series: PicoBlade (53261 family) Connector Type: Wire-to-Board Header (Male Pins) Number of Positions: 2 pins (1×2 configuration) Pitch: 1.25 mm (high-density compact spacing) Mounting Type: Surface Mount (SMT), Right Angle Contact Type: Male blade terminals Current Rating: 1 A Voltage Rating: 125 V Operating Temperature: −40 °C to +105 °C Contact Material: Phosphor bronze Contact Plating: Tin (Sn) Flammability Rating: UL94 V-0 Package Style: Tape & Reel (for automated assembly) Typical Applications Compact consumer electronics Battery-powered devices IoT modules and embedded systems Sensor connections Portable medical or industrial devices Board-to-wire signal interconnects in tight PCB layouts #CommonPartsLibrary #Connector