Single-String 3V Minimum VIN 36V VOUT Boost LED Driver #ultralibrarian

Miniature Reflective Optical Object Sensor, SMD-4 Reflective Optical Sensor Opto reflex coupler OnSemi*CASE100CY*

High-Speed Logic Output Optocoupler – Single-channel high-speed optocoupler designed for digital signal isolation, industrial automation, PLCs, motor drives, switching power supplies, data communication, microcontroller interfaces, and embedded control systems. Features an open-collector TTL-compatible output with a 15 MBd data rate, 5 kVrms isolation voltage, and 10 kV/µs minimum common-mode transient immunity (CMTI) for reliable operation in noisy electrical environments. Provides 75 ns maximum propagation delay, 22 ns typical rise time, 6.9 ns typical fall time, and supports up to 50 mA output current. The input consists of a GaAs infrared LED with a 1.38 V typical forward voltage and 20 mA maximum forward current. Operates from a 4.5 V to 5.5 V output-side supply, over a −40°C to +85°C temperature range, and is housed in a compact 8-pin SOIC (SMD) package for space-efficient PCB designs. #LiteOn #6N137STA1 #6N137 #Optocoupler #LogicOptocoupler #DigitalIsolation #HighSpeedIsolation #IndustrialAutomation #MotorDrive #PLC #EmbeddedSystems

8088 (minimum mode), 8-Bit HMOS Microprocessor, PDIP-40 MPRO DIP*W15.24mm*

3.3V, 4.5A, 14.85W, Isolated, AC-DC, 219A(IRM20) Miniature Module-type Power Supply MeanWell Converter*ACDC*MeanWell*IRM*20*THT*

3.3V, 600mA, 2W, Isolated, AC-DC, IRM02 Miniature Module-type Power Supply MeanWell Converter*ACDC*MeanWell*IRM*02*THT*

Buzzers Transducer, Externally Driven Piezo 5 V 2kHz 70dB @ 5V, 10cm THT PC Pins Piezoelectric buzzer for generating audible alerts from an external drive signal, featuring a 2 kHz resonant frequency and a 5 V_0-p rated input voltage. It provides a minimum sound pressure level of 70 dB(A) at 10 cm (2 kHz, 5 V_0-p rectangular wave), supports a maximum input voltage of 30 V_0-p without DC bias, and operates over a −10°C to +70°C temperature range. #TDK #PiezoelectricBuzzer #Buzzer #2kHz #5V #70dBA #ThroughHole #AudioIndicator #ElectronicComponents #PCBDesign

FFC/FPC Connector – 24-position right-angle FFC/FPC connector with 0.5 mm pitch for board-to-cable connections. Features a back-lock actuator, dual top and bottom contacts, surface-mount termination, 0.5 A per contact current rating, 250 VAC dielectric withstand voltage, 100 mΩ maximum contact resistance, and 1,000 MΩ minimum insulation resistance. Designed with a 1.0 mm low-profile height and supports 20 mating cycles. #PanasonicIndustry #AYF532435 #Y5B #FFCConnector #FPCConnector #BoardToCable #0_5mmPitch #24Position #BackLock #SurfaceMount #LowProfileConnector #EmbeddedSystems

Relay Miniature Omron DPDT Miniature Relay Dual Pole DPDT Omron Relay*DPDT*Omron*G5V*

7 (6 + 1) Position Card Connector NANO SIM Surface Mount, Right Angle Gold Nano SIM card connector for secure connection of a 6-contact Nano SIM (4FF) card in mobile and embedded devices. Features a right-angle surface-mount hinged-lid design with a normally open card detection switch, 0.5 A current rating, 30 VAC/DC voltage rating, 100 mΩ maximum contact resistance, 100 MΩ minimum insulation resistance, and an operating temperature range of -20°C to +85°C. #NanoSIM #SIMCardConnector #MemoryCardConnector #SurfaceMount #RightAngle #HingedLid #CardDetectionSwitch #GCT

8-Mbit, 2.5V Minimum SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support, TSSOP-8 SPI DSPI QSPI 8Mbit 2.5V TSSOP?8*4.4x3mm*P0.65mm*

NPN Bipolar Junction Transistor (BJT) – High-voltage NPN transistor for general-purpose switching and amplification, featuring a 160 V collector-emitter breakdown voltage, 600 mA maximum collector current, and 2.25 W power dissipation. Provides a 130 MHz transition frequency, minimum DC current gain (hFE) of 80 at 10 mA, and 200 mV maximum collector-emitter saturation voltage at 50 mA collector current. Specified for operation over a −55°C to +150°C junction temperature range and housed in a PowerDI™ 5 surface-mount package. #DiodesIncorporated #DXT5551P513 #NPNTransistor #BJT #HighVoltageTransistor #SwitchingTransistor #AmplifierTransistor #160V #600mA #PowerDI5 #DiscreteSemiconductor #EmbeddedSystems

The OPA237 op amp family is one of Texas Instruments’ MicroAmplifier series of miniature products. In addition to small size, these devices feature low offset voltage, low quiescent current, low bias current, and a wide supply range. Single, dual, and quad versions have identical specifications for maximum design flexibility. They are ideal for single-supply, battery-operated, and space-limited applications, such as PCMCIA cards and other portable instruments. #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #OPA237

Low standby Current of typically 0.1A at VDD=5V Minimum transmission word (4 words) Built-in oscillator needs only 5% resistor Data code has positive polarity Pair with Holtek's 2^12 series of decoders Operating temperature range from -20°C to 75°C 18-DIP #Commonpartslibrary #integratedcircuit

Switch DIP ON OFF SPST 6 Recessed Slide 0.025A 24VDC J-Bend 1.27mm SMD Tube Series 218 is a compact DIP switch for miniature application where size is a constraint. It is ideal for server, security, HVAC system. 218 switch design aids improved reliability with positive detent and non-deflecting contactor during actuation.

Accelerometer X, Y, Z Axis ±3g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL335BCPZ is a small, thin, low-power, complete 3-axis accelerometer with signal-conditioned voltage outputs. It measures acceleration with a minimum full-scale range of ±3 g. The device outputs analog voltages proportional to acceleration in each of the three orthogonal axes (X, Y, and Z). The accelerometer is designed for low power consumption and high resolution, making it suitable for mobile devices, tilt sensing, motion detection, and vibration monitoring. It operates over a wide temperature range and requires minimal external components, enabling easy integration into compact systems. Functional Overview The ADXL335 uses a capacitive sensing structure to detect acceleration. Changes in acceleration result in differential capacitance changes, which are converted into voltage outputs through an internal signal conditioning circuit. Each axis provides an independent analog output that can be directly interfaced with ADC inputs of microcontrollers or other processing units. Bandwidth for each axis can be adjusted using external capacitors, allowing flexibility depending on application requirements. Electrical Characteristics Supply Voltage Range: 1.8 V to 3.6 V Supply Current: Typical: 350 µA Measurement Range: ±3 g Sensitivity (Typical): 300 mV/g Zero-g Bias Level: Approximately mid-supply voltage Bandwidth: User-selectable via external capacitors Typical range: X, Y axes: up to 1600 Hz Z axis: up to 550 Hz Output Characteristics Output Type: Analog voltage (ratiometric to supply voltage) Number of Axes: Three (X, Y, Z) Output Noise: Low noise suitable for precision motion sensing Cross-Axis Sensitivity: Typically ±1% Mechanical Characteristics Package Type: 16-lead LFCSP (Lead Frame Chip Scale Package) Dimensions: Approximately 4 mm × 4 mm × 1.45 mm Mounting: Surface mount Environmental Specifications Operating Temperature Range: −40°C to +85°C Shock Survivability: Up to 10,000 g Interface Requirements External Components: Requires capacitors for bandwidth setting (one per axis) Output Interface: Direct analog output compatible with ADC inputs Applications Mobile devices and handheld electronics Tilt and orientation sensing Vibration monitoring systems Gaming and motion input devices Industrial instrumentation Wearable electronics Key Features Low power consumption Compact form factor High resolution analog outputs User-adjustable bandwidth Wide operating temperature range Simple integration with minimal external components #commonpartslibrary #sensor #transducer #motionsensor #accelerometer

Miniature Light Reflection Switches #commonpartslibrary #sensor #Proximitysensor #integratedcircuit

Photorelay with a 1-Form-A (normally open) MOSFET output, designed for isolated solid-state switching applications. It features a 200 V OFF-state output voltage, 200 mA ON-state current, 1 mA maximum trigger LED current, 8 Ω maximum ON-state resistance, 1500 Vrms minimum isolation voltage, and is housed in a 4-pin SOP (2.54SOP4) package. #Photorelay #MOSFETOutput #Optocoupler #1FormA #SolidStateRelay #Isolation #200V #200mA #SOP4 #ToshibaSemiconductor