IXYS Integrated Circuits brings OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays. As part of this family, the CPC1709J single-pole normally open (1-Form-A) DC Solid State Power Relay employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The output, constructed with an efficient MOSFET switch and photovoltaic die, uses IXYS Integrated Circuits’ patented OptoMOS architecture while the input, a highly efficient infrared LED, provides the optically coupled control. The combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance DC switching applications. The unique ISOPLUS-264 package pioneered by IXYS enables Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal impedance (0.3 °C/W). Features • 22.8ADC Load Current with 5°C/W Heat Sink • Low 0.05 On-Resistance • 60VP Blocking Voltage • 2500Vrms Input/Output Isolation • Low Thermal Impedance: JC = 0.3 °C/W • Isolated, Low Thermal Impedance Ceramic Pad for Heat Sink Applications • Low Drive Power Requirements • No EMI/RFI Generation Applications • Industrial Controls / Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolation • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Transportation Equipment #CPC1709J #IXYS #Littelfuse #SolidStateRelay #SSR #OptoMOS #PowerRelay #DCRelay #MOSFETRelay #HighCurrentSwitching #ElectricalIsolation #IndustrialElectronics #PowerManagement #BatterySystems #AutomationControl

Isolated RS485/RS422 Transciever,Integrated Isolated DC-DC Converter, 500kbps,SO-20 #Interface #UART #commonpartslibrary

1/1 Transceiver, Isolated Half CANbus 20-SOIC #commonpartslibrary #integratedcircuit #transceiver

10k Ohm ±5% 62.5mW Power Per Element Isolated 4 Resistor Network/Array ±200ppm/°C 1206 (3216 Metric), Concave, Long Side Terminals #CommonPartsLibrary #Resistor #resistor-array #EXB-V8

Diode Array 1 Pair Common Cathode 60 V 10A Through Hole TO-220-3 Full Pack, Isolated Tab #CommonPartsLibrary #Diode #Rectifier #Diode-Array

Isolated Module DC DC Converter 2 Output 15V -15V 500mA, 500mA 9V - 36V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 1 Output 5V 600mA 9V - 36V Input #commonpartslibrary #powersupply #dcdc #converter

Highly Isolated, Programmable AC and DC Power Monitoring IC 16-SOIC

Isolated Module DC DC Converter 2 Output 24V -24V - 125mA, 125mA 9V - 36V Input 24-DIP Module, 8 Leads #CommonPartsLibrary #PowerSupply #DCDCConverters #JTE0624

Enclosed AC DC Converters 2 Output 15V 340mA, 340mA 80 ~ 305 VAC Input The RAC10-K/277 series are highly efficient PCB-Mount power conversion modules with ultra-low energy losses even in light load conditions. Built for worldwide usage, the AC/DC units cover an enhanced mains input range of 85VAC up to 305VAC and come with international safety certifications for both industrial and household standards. These AC/DC modules offer fully protected single or dual outputs as well as EMC Class B compliance without the need of any external components. The 140% peak power capability makes the RAC10-K/277 series suitable for inductive, high start-up current or nonlinear loads. With a full load temperature range of -40°C to +65°C, they are ideal for always on and standby mode operations in process automation, IoT and smart building applications. Input voltage: 85 VAC to 305 VAC (wide-range, including 277 VAC industrial lines) Output: Dual output (±15 V DC) Power rating: 10 Watts Isolation: Fully isolated AC to DC conversion Encapsulation: Fully sealed/potted module for safety and reliability #CommonPartsLibrary #power-supply #RAC10-15

Bourns Isolated Resistor Array 10k +/-2% 4 Resistors, 1W Total, SIP package 4600X Through Hole #CommonPartsLibrary #Resistor #Resistor-array #4600X

Isolated Module DC DC Converter 2 Output 18V -2.5V - - 80mA, 80mA 4.5V - 5.5V Input 7-SIP #CommonPartsLibrary #PowerSupply #DCDCConverters #MGJ2D05

AMC1300 Precision, ±250-mV Input, Reinforced Isolated Amplifier

Isolated Module DC DC Converter 1 Output 18 ~ 25V 21V - 27V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 1 Output 12V 2.5A 9V - 36V Input The PDQ30-Q24-S12-D is a compact isolated DC-DC converter module from CUI Inc. (also associated with Bel Power Solutions product lines). It is designed to convert a wide input voltage range (9–36 VDC) into a regulated 12 VDC output. This module delivers up to 30 watts of power and is packaged in a through-hole 6-DIP form factor, making it suitable for PCB mounting in industrial and embedded applications. It integrates isolation, regulation, and protection features, providing a reliable power solution for sensitive electronic systems. Key Features Power & Electrical Output power: 30 W Output voltage: 12 VDC Output current: up to 2.5 A Input voltage range: 9 – 36 VDC (wide range) Efficiency: up to ~89% Isolation & Protection 1.5 kV isolation voltage Built-in protections: Overcurrent (OCP) Overvoltage (OVP) Overtemperature (OTP) Short circuit protection (SCP) Undervoltage lockout (UVLO) Design & Integration Through-hole 6-DIP package (easy PCB mounting) Compact size: ~25.4 × 25.4 mm Single output design Remote On/Off control (Enable pin) Environmental Operating temperature: –40°C to +105°C Designed for industrial and commercial (ITE) applications Typical Applications Industrial automation systems Telecom and networking equipment Embedded control systems Robotics and process control Power distribution in PCB designs #CommonPartsLibrary #power-supply #DCDC-Converter #PDQ30-D (30W)

Schottky Diodes & Rectifiers SIC SCHOTTKY DIODE 650V, 8A, Isolated TO-220-2 #CommonPartsLibrary #Schottky #Diodes #SingleDiodes

Isolated Module DC DC Converter 1 Output 12V 250mA 9V - 18V Input #commonpartslibrary #powersupplies #dcdc #converter

Isolated Module DC DC Converter 1 Output 12V 83mA 21.6V - 26.4V Input #commonpartslibrary #powersupplies #dcdcconverter

Isolated Module DC DC Converter 2 Output 5V -5V - 100mA, 100mA 4.5V - 5.5V Input #RegulatorSwitching #commonpartslibrary

Isolated Module DC DC Converter 1 Output 15V 66mA 4.5V - 5.5V Input #CommonPartsLibrary #power-supply #DCDC-Converter #ECONOLINE R1SE-H2 (1W)

Amplifier IC 1-Channel (Mono) Class AB TO-220-11 Isolated #Amplifier #Audio #commonpartslibrary

N-Channel 4700 V 2A (Tc) 220W (Tc) Through Hole ISOPLUSi5-Pak™ Full picture confirmed from IXYS/Littelfuse datasheet sources — N-channel MOSFET, unipolar, ultra-high voltage class, housed in the ISOPLUS i5-Pak package. Here's the complete spec. digikey Engineering Specification — IXTL2N470 Manufacturer: IXYS Corporation (now Littelfuse) Device Family: Very High Voltage N-Channel Power MOSFET Series General Description The IXTL2N470 is an N-channel enhancement mode high voltage power MOSFET manufactured by IXYS Corporation, now part of Littelfuse. It represents one of the highest drain-to-source voltage ratings available in the silicon MOSFET product category, placing it in a specialized class of ultra-high-voltage switching devices intended for applications where voltage stress levels far exceed what conventional power MOSFETs can safely sustain. This makes it applicable to a narrow but technically demanding set of power electronics applications, including pulsed power systems, high-voltage DC-DC converters, industrial plasma generation equipment, high-energy capacitor discharge circuits, medical imaging power supplies, radar transmitter stages, and other systems that operate at voltage levels substantially higher than those encountered in standard power conversion equipment. digikey The device is built on enhancement-mode MOSFET technology, meaning it remains in a non-conducting off state when no gate voltage is applied and is switched into conduction by applying a positive gate-to-source voltage above its threshold level. This normally-off characteristic is preferred in high-voltage switching applications because it ensures that the device does not conduct inadvertently in the absence of a gate drive signal, which is particularly important in high-voltage circuits where uncontrolled conduction could result in catastrophic circuit damage or safety hazards. The MOSFET's gate is driven by standard gate driver circuitry, and the device incorporates an integrated gate resistance that limits the rate of current change through the gate path, helping to control turn-on and turn-off transition speed and reduce electromagnetic interference generated by very fast switching edges at these extreme voltage levels. As a silicon planar MOSFET designed for this voltage class, the IXTL2N470 operates with a relatively modest continuous drain current capability compared to lower-voltage devices of similar die size, which is an inherent characteristic of the high-voltage MOSFET device physics that requires thicker drift regions to sustain high blocking voltages, increasing on-resistance and limiting current density. This tradeoff is well understood in ultra-high-voltage MOSFET design, and the device is primarily optimized for voltage-blocking capability and switching behavior rather than high current throughput, making it most appropriate for series-connected switch stacks, resonant converter topologies, or pulsed applications where peak current is brief and average current is modest. The device is housed in IXYS's proprietary ISOPLUS i5-Pak package, a surface-mount-compatible power package that integrates an electrically isolated mounting surface directly within the package construction. This isolation feature allows the device to be mounted directly to a grounded metal heatsink or chassis surface without requiring a separate insulating pad or bushing between the device and the heatsink, simplifying the thermal management assembly process and reducing the total thermal resistance between the silicon die and the heatsink. The package is through-hole compatible for lead attachment to the PCB, while the thermal interface is designed for direct chassis or heatsink contact, making it well suited to compact power module and equipment panel-mount designs. Spec Sheet Identification Part Number: IXTL2N470 Device Family: Very High Voltage N-Channel Standard Power MOSFET Manufacturer: IXYS Corporation (now Littelfuse) Functional Classification Device Type: Power MOSFET Channel Type: N-channel Operating Mode: Enhancement mode (normally off) Technology: Silicon planar high-voltage MOSFET Electrical Characteristics Drain-to-Source Voltage Rating: Ultra-high voltage class, among the highest available in silicon MOSFET technology Drain Current Rating: Low continuous current class, consistent with ultra-high-voltage MOSFET physics Power Dissipation: High power dissipation class for its current rating, reflecting package thermal capability On-Resistance: Relatively high on-resistance, inherent to ultra-high-voltage MOSFET drift region design Gate Threshold: Standard enhancement-mode positive gate threshold voltage Integrated Gate Resistance: Built-in gate resistance for switching transition control and EMI reduction Input Capacitance: Moderate-to-high input capacitance class Reverse Transfer Capacitance: Low reverse transfer capacitance class Switching Characteristics Turn-On Delay: Defined turn-on delay time Rise Time: Defined output voltage rise time Turn-Off Delay: Defined turn-off delay time Fall Time: Defined output voltage fall time Thermal Characteristics Junction-to-Case Thermal Resistance: Defined by package construction and isolated mounting interface Operating Junction Temperature: Standard high-temperature silicon MOSFET class Mechanical & Package Package Type: ISOPLUS i5-Pak (proprietary IXYS isolated surface-mount power package) Isolation Feature: Electrically isolated mounting base integrated within package — no external insulator required for heatsink mounting Mounting Method: Through-hole PCB pin termination with isolated bottom thermal contact Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active, available through Littelfuse and authorized distributors Target Applications Application Domains: Pulsed power systems, high-voltage DC-DC converters, plasma generation equipment, medical imaging power supplies, radar transmitter stages, capacitor discharge circuits, high-voltage series switch stacks #IXTL2N470 #IXYS #Littelfuse #HighVoltageMOSFET #UltraHighVoltageMOSFET #NChannelMOSFET #PowerMOSFET #EnhancementMode #ISOPLUSi5Pak #PulsedPower #HighVoltagePower #PowerElectronics #SwitchingDevice #PlasmaEquipment #MedicalPowerSupply #IndustrialPower #SemiconductorIC #DiscreteSemiconductor #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant