Led Segment Display 1 0.56\'\'(14.22mm) Common Anode Red DIP RoHS #LED-character #Numeric

LED; SMD; 3528, PLCC2; RGB; 3.5x2.8mm; 120°; Red lumin: 1

LED Lighting Color XLamp XM-L Gen 2 Red, Green, Blue, White - Cool (RGBW) 625nm Red, 528nm Green, 458nm Blue, 6850K White 2020 (5050 Metric)

The TM1637 4-Digit 7-Segment Red Display Module incorporates four 0.36″ red 7-segment displays along with the TM1637 serial LED driver. #Display #LED #Module

LED Circuit Board Indicator LED Circuit Board Indicator Bar - 10 Wide, DIP Red (x 10) Tinted 2V 25mA Rectangle with Flat Top 5.08mm x 1.78mm Through Hole #CommonPartsLibrary #Optoelectronics #Light-Bar #Bar-Graphs #LTA

Pushbutton Switch SPST-NO Standard, Illuminated Through Hole 12V,100mA (DC),-25C ~ 50C Illuminated pushbutton switch for momentary SPST control with a common-anode 4-pin RGB LED. The KP01 series features gold contacts and straight PC terminals rated at 100 mA @ 12 V DC, with a 4.5 mm total travel and 1.9 N maximum actuation force. The RGB LED has typical forward voltages of 2.0 V (red), 2.9 V (green), and 2.9 V (blue), with a –25°C to +50°C operating range. #NKKSwitches #PushbuttonSwitch #RGBLED #SPST #PCB

KY-009 RGB Full Color LED module emits a range of colors by mixing red, green, and blue light. Each color is adjusted by using PWM. #RGB #LED #Module#part

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

LED Driver IC 16 Output Linear PWM Dimming 25mA 5.5V 28-TSSOP PCA9685PW,118 is a 16-channel, 12-bit PWM LED controller with an I²C interface designed for LED dimming, RGB/RGBA lighting, and servo motor control applications. It provides independent PWM control for up to 16 outputs, allowing precise brightness or position control while minimizing MCU GPIO usage. The device supports Fast-mode Plus I²C communication up to 1 MHz and operates from a 2.3 V to 5.5 V supply range. It is commonly used in robotics, LED backlighting, automation systems, and PWM expansion modules for microcontrollers such as Arduino, ESP32, and Raspberry Pi. Key Features 16 independent PWM output channels 12-bit PWM resolution (4096 steps) Programmable PWM frequency from approximately 24 Hz to 1526 Hz I²C Fast-mode Plus compatible interface up to 1 MHz Six hardware address pins allowing up to 62 devices on one I²C bus Programmable open-drain or totem-pole outputs Output capability: 25 mA sink current 10 mA source current Internal 25 MHz oscillator with optional external clock input Individual programmable LED ON/OFF timing for reduced EMI and current surges Supports software reset and group addressing (All Call/Sub Call) 5.5 V tolerant inputs and outputs Operating voltage range: 2.3 V to 5.5 V Package: 28-pin TSSOP (PW suffix) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LEDdriver

Infrared (IR), Visible Emitter 536nm, 660nm, 950nm 1.3V, 1.9V, 2.3V 40mA, 80mA, 200mA 3.7mW/sr @ 80mA 120° 8-SMD, No Lead The SFH 7018A is a high-performance 3-in-1 multi-emitter LED module from ams OSRAM designed for optical vital-sign monitoring applications. It integrates green, red, and infrared LEDs into a compact reflective QFN package optimized for wearable health devices such as smartwatches, fitness bands, pulse oximeters, and medical monitoring equipment. The device features a dual-cavity optical structure that minimizes optical interference between emitters, improving heart-rate and SpO₂ measurement accuracy. Key Features Integrated green, red, and infrared LEDs in one package Wavelengths: Green: 536 nm Red: 660 nm Infrared: 950 nm Optimized for: Heart-rate monitoring SpO₂ sensing PPG (photoplethysmography) Highly reflective QFN SMT package Advanced 2-cavity design for reduced optical crosstalk Low forward voltage operation optimized for battery-powered devices Can operate without a boost converter in many designs Wide viewing angle: 120° Surface-mount package: 8-SMD, no lead Operating temperature range: −40°C to +85°C Emitters can be driven independently Suitable for compact wearable and medical electronics #CommonPartsLibrary #LED #Infrared

LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver

OPSCO SK6812MINI RGBW is an intelligent addressable RGBW LED with an integrated control IC inside a compact 3.7 mm × 3.7 mm surface-mount package. It combines red, green, blue, and dedicated white LEDs with a built-in constant-current driver, allowing individual pixel control through a single-wire serial data interface. Each LED contains an internal data latch, PWM controller, signal reshaping circuit, and cascade output, enabling long chains of individually addressable LEDs without additional external components. Compatible with SK6812 and similar NeoPixel-style protocols, it is widely used in LED displays, decorative lighting, wearable electronics, smart home devices, gaming peripherals, indicators, keyboards, and embedded lighting applications. Features include serial data input/output (DIN/DOUT), integrated PWM dimming, high color consistency, and easy daisy-chain connectivity. Search Keywords: SK6812MINI, SK6812 MINI, RGBW LED, addressable RGBW LED, intelligent LED, NeoPixel compatible LED, smart RGB LED, serial controlled LED, individually addressable LED, DIN DOUT LED, programmable LED, LED pixel, embedded lighting LED, digital RGBW LED, SMD RGBW LED, LED strip pixel, SK6812 LED driver Hashtags: #SK6812MINI #SK6812 #RGBW #AddressableLED #SmartLED #NeoPixel #DigitalLED #LEDPixel #EmbeddedLighting #LEDDisplay #Arduino #ESP32 #IoT #WearableElectronics #PCBDesign #LightingControl #SMDLED #ElectronicComponents #LEDDriver #RGBLEDProgrammable LED; RGBW; SMD; 3535,PLCC4; 3.75.5VDC; 3800-4200K

555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-SOIC The TLC555IDR is a low-power CMOS timer device designed as a functional replacement for the standard bipolar 555 timer while providing significantly reduced supply current and improved operating efficiency. The device supports both astable and monostable operating modes and is commonly used for timing generation, pulse shaping, oscillation, PWM generation, delay circuits, and frequency generation applications. The CMOS architecture enables low power consumption, rail-to-rail output capability, and stable timing performance over a wide operating voltage range. The device is suitable for battery-powered systems, portable electronics, industrial controls, instrumentation, consumer products, and embedded electronic designs. The TLC555IDR is supplied in a compact SOIC surface-mount package intended for automated PCB assembly and space-constrained applications. Electrical Characteristics CMOS low-power timer architecture Functional equivalent to standard 555 timer devices Wide operating supply voltage range Low quiescent supply current High input impedance Rail-to-rail output swing capability Stable threshold and trigger levels Compatible with TTL and CMOS logic levels Capable of astable and monostable operation Adjustable duty cycle and frequency operation High output drive capability for direct interfacing Low noise and improved switching performance compared to bipolar 555 timers Functional Features Precision timing generation Oscillator and clock generation Pulse-width modulation support One-shot pulse generation Delay timer implementation Missing pulse detection Frequency divider implementation Sequential timing control LED flashing and tone generation PWM motor and power control applications Package Information Surface-mount SOIC package Standard tape-and-reel packaging format Compact footprint for automated assembly RoHS compliant device construction Environmental and Operating Conditions Industrial operating temperature range ESD protection handling required Suitable for commercial and industrial embedded systems Designed for low-power electronic applications Typical Applications Timer circuits Pulse generators Oscillators PWM controllers LED flashers Alarm and tone generators Frequency generators Power management timing Embedded control systems Portable battery-powered electronics #commonpartslibrary #integratedcircuit #timer #oscillator

33µH Shielded Drum Core, Wirewound Inductor 8 A 58mOhm Max Nonstandard The SRP1265A-330M is a shielded wirewound power inductor from the Bourns SRP1265A series, designed for high-current DC-DC converters, voltage regulator modules, and power supply applications. It features a carbonyl powder core construction that provides high saturation current capability, low electromagnetic interference (EMI), and stable inductance characteristics in compact surface-mount packaging. The device is AEC-Q200 qualified, making it suitable for automotive and industrial environments. Key Features 33 µH inductance Shielded construction for reduced EMI High saturation current capability Carbonyl powder core Low DC resistance Surface-mount package Wirewound drum-core structure AEC-Q200 qualified RoHS compliant and halogen free Operating temperature up to +150 °C Suitable for high-current switching regulators and DC-DC converters Electrical Characteristics Inductance: 33 µH Tolerance: ±20% Current Rating: 8 A Saturation Current (Isat): 11 A DC Resistance (Max): 58 mΩ Self-Resonant Frequency: 5 MHz Typical Applications DC-DC converters Switching power supplies Automotive electronics EMI filtering Industrial power systems LED drivers Battery-powered equipment #CommonPartsLibrary #Inductor #SMD

8-Channel High-Side Source Driver Array – High-voltage, high-current source driver IC designed for LED and lamp driving, relay control, solenoid driving, industrial automation, printers, automotive electronics, PLCs, and embedded control systems. The Allegro UDN2981A integrates eight non-inverting high-side Darlington transistor outputs, allowing direct interfacing between TTL/CMOS logic and higher-voltage loads. Each output can source up to 500 mA, with an output voltage capability of up to 50 V, making it ideal for driving inductive and resistive loads. Features integrated input resistors, output clamp diodes for inductive load protection, and TTL/5 V CMOS-compatible inputs, simplifying circuit design and reducing external component count. Operates from a 4.75 V to 15 V logic supply, over a −20°C to +85°C temperature range, and is housed in an 18-pin DIP (through-hole) package for easy PCB integration. #Allegro #UDN2981A #HighSideDriver #SourceDriver #DarlingtonArray #RelayDriver #SolenoidDriver #LEDDriver #IndustrialAutomation #EmbeddedSystems #PowerDriver #TTLCompatible

TM1814 is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products. This product has excellent performance and reliable quality. Features  Adopt power CMOS technology  Withstand voltage of OUT output port is 32V  5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor  Constant current can achieve level 64 adjustment (6.5 mA-38mA)  PWM brightness controls circuit, and 256 brightness is adjustable  Accurate current output value Maximum error (between channels): ±3% Maximum error (between chips): ±5%  Single line serial concatenated port  Oscillation mode: build in RC vibration and conduct clock synchronization according to signals on data line. After receiving the data from this unit, it can reproduce follow-up data and send it to lower level through data output end, and signals will not be distorted and reduced along with cascade  Build in power on reset circuit, and after powering on reset, all registers are initialized to zero  External control mode data transmission rate is 800 KHZ  Internal control mode data transmission rate is 500 KHZ  Internal control mode chip sends 2048 points of data  Encapsulation mode: SOP8 #CommonPartsLibrary #IntegratedCircuit

UCS 76 04 Is the intelligent bad point continuous transmission series 4 channel65536, level gray scale function LED drive control special circuit, internal integratedMCU, digital interface, data latch, LED high voltage drive and other circuits. Throughthe peripheral MCU control, the separate brightness and cascade control of the chip canrealize the color dot matrix luminescence control of the outdoor large screen. Intelligent bad point continued transmission series IC adopted, advanced HPD intelligent error signal identification technology, the channel error signal identification rate reached more than 99%, and also used the patented dual decodingengine, at the same time monitoring two channels, any channel signal problem real-timeswitch. UCS 7604 RGBW channel output adopts 65535 level gray scale output, with independent current adjustment function of each channel, high precision constant currentdesign, 16K port refresh frequency, so that the picture effect more restore the real color,rich and gorgeous. Excellent product performance, stable and reliable. Double channel bad point transmission function, fault point signal can continue tobe passed down, the overall failure transmission rate of more than 99% Advanced HPD intelligent error signal identification technology, the channel faultidentification rate of more than 99% The patented dual decoding engine simultaneously monitors and decodes two channels,and any problem in the used channel will be switched to normal in real time Channel, and because it is a real-time switch, it is difficult for the human eyeto find the abnormal picture process Can work normally at any frame frequency Advanced channel fault test function, real-time dynamic light on indicates singlechannel fault and channel short circuit recessive fault in the postpartum test oflamps Grayscale level 65536,8 bit (built-in gamma 2.2, corrected to 16 bit) / 12 / 14 / 16 bitdata optional Port refresh frequency is 16K ± 5% high constant current accuracy design RGBW current per channel can be set independently The applied resistance to set the output current, 0-60 mA Data transmission frequencies of 800K / S and 1.6M / S are optional The 1 / 2 / 3 / 4 field mode is optional Chip VDD built-in 5V voltage regulator, output port pressure maximum 30V RGBW channel off, black S-AI anti-interference patented technology, which can greatly reduce and filter outradiation interference and conduction interference S-Drive drive technology and enhanced receiving technology, greatly enhance theconnection distance between points Industrial-grade design, stable and reliable #CommonPartsLibrary #IntegratedCircuit #LED-Driver #4-channel-output

Shielded High-Temperature Power Inductor – 68 µH magnetically shielded SMD power inductor designed for DC-DC converters, switching regulators, automotive electronics, industrial power supplies, LED drivers, and embedded power management applications. Features 68 µH inductance (±20%), 1.8 A RMS current, 2.26 A saturation current, and 185.9 mΩ maximum DCR, providing excellent current handling and low power loss. Built with a ferrite core and magnetic shielding for reduced EMI and high-density PCB layouts, it is AEC-Q200 Grade 1 qualified for automotive applications. Measures 12 × 12 × 4.6 mm, supports reflow soldering, has MSL 1 moisture sensitivity, and operates over a −40°C to +125°C ambient temperature range with a +165°C maximum part temperature. #Coilcraft #MSS1246T683MLB #PowerInductor #ShieldedInductor #68uH #SMTInductor #FerriteCore #AECQ200 #DCDCConverter #SwitchingRegulator #AutomotiveElectronics #EmbeddedSystems

The HOTCHIP HT4936S is a sophisticated mobile power management integrated circuit designed by Hotchip, optimized for portable power solutions that require efficient charging and power management capabilities. This advanced component integrates features for charging and discharging through a common port, automatic load detection for boost startup and shutdown, four-light battery level indication, and a low battery alert functionality. The HT4936S stands out for its ability to manage 1A input/output with minimal external components, leveraging synchronous rectification to enhance efficiency and reduce thermal footprint. Additionally, it supports a versatile charging protocol accommodating both 4.20V and 4.35V batteries, and is packaged in a compact SOP16 form factor, ensuring a low-cost, space-efficient solution for a wide range of mobile power applications including power banks, backup power supplies, and lithium battery chargers. It incorporates protection features against battery overcharge, over-discharge, and thermal overload, thereby ensuring reliable operation across a range of conditions. Furthermore, the HT4936S facilitates direct LED drive and includes an NTC thermistor input for temperature monitoring, making it an all-encompassing solution for power management in consumer electronics.

N-Channel 55 V 51A (Tc) 80W (Tc) Through Hole TO-220AB The IRLZ44ZPBF is a logic-level N-channel power MOSFET manufactured by Infineon Technologies under the International Rectifier product family. This device is optimized for low-voltage switching applications and is designed to provide high current handling capability with low on-state resistance. Its logic-level gate drive characteristic allows efficient operation directly from low-voltage microcontrollers and digital control circuits without requiring specialized gate drivers. The MOSFET is widely used in power management systems, motor control circuits, DC-DC converters, battery-powered devices, switching regulators, LED drivers, and general-purpose high-current switching applications. The device features fast switching performance, rugged avalanche characteristics, and low conduction losses, making it suitable for efficient power conversion and industrial electronic designs. Engineering Specification Device Type N-channel logic-level power MOSFET Transistor Technology Enhancement-mode HEXFET power MOS technology Channel Configuration Single N-channel Gate Drive Compatibility Logic-level gate operation compatible with low-voltage control systems Drain-to-Source Characteristics Low drain-to-source on-resistance for reduced conduction losses Switching Performance Fast switching capability for high-efficiency power applications Power Dissipation Designed for high-current and high-power switching operation Package Type TO-220 through-hole package Mounting Style Through-hole mounting Thermal Characteristics Optimized thermal performance for heatsink attachment and power dissipation Protection Features Rugged avalanche-rated structure for improved reliability Efficiency Features Low gate charge and low conduction losses Applications Motor drivers PWM switching circuits DC-DC converters Battery-powered electronics LED lighting control Power management systems Load switching Industrial automation Embedded power control High-current switching circuits Manufacturer Infineon Technologies / International Rectifier #commonpartslibrary #mosfet #powermosfet #nchannelmosfet #logiclevelmosfet #powerelectronics #switchingdevices #motorcontrol #dcdcconverter #embeddedhardware #powermanagement #electronicsdesign #throughholecomponents #infineon #internationalrectifier

A block of red, green, blue, warm white, and cool white leds. All using same part so do not give directly to pcb fab.

The Chip-LED Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.