N-Channel 100 V 100A (Tc) 2.5W (Ta), 139W (Tc) Surface Mount PG-TDSON-8-7 BSC040N10NS5ATMA1 is a high-performance 100V N-Channel Power MOSFET from Infineon's OptiMOS™ 5 family. It is designed for high-efficiency switching applications such as switched-mode power supplies (SMPS), synchronous rectification, DC-DC converters, motor drives, battery-powered systems, and industrial power management. The device features extremely low on-resistance, high current capability, and excellent thermal performance, making it suitable for demanding power conversion applications. Key Features N-Channel Enhancement Mode MOSFET 100V Drain-to-Source Voltage (VDS) Ultra-low RDS(on): 4.0 mΩ max @ VGS = 10V Continuous Drain Current up to 100A (package limited) Optimized for high-performance SMPS and synchronous rectification Low gate charge for improved switching efficiency 100% avalanche tested for enhanced robustness Superior thermal resistance and power dissipation Wide operating junction temperature range: -55°C to +150°C RoHS compliant and halogen-free Compact PG-TDSON-8 / SuperSO8 package for high power density designs Typical Applications DC-DC Converters Synchronous Rectifiers Motor Control Battery Management Systems (BMS) Telecom and Industrial Power Supplies Solar Power Systems High-Current Switching Circuits #Infineon #OptiMOS5 #MOSFET #NChannelMOSFET #PowerMOSFET #100V #LowRDSon #SMPS #DCDCConverter #MotorDrive #PowerElectronics #IndustrialElectronics #BSC040N10NS5ATMA1 #HighEfficiency #SynchronousRectification

390 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film Carbon film resistor for general-purpose current limiting and voltage division, featuring 390 Ω resistance, ±5% tolerance, 0.25 W (1/4 W) power rating, and a maximum working voltage of 250 V. #CarbonFilmResistor #Resistor #390Ohm #0_25W #5PercentTolerance #ThroughHole #YAGEO

Negative Hot Swap / Inrush Current Controller with Power Limiting, SOIC-14W high-voltage mosfet-driver hot-swap Texas Instruments *SOIC*7.5x9mm*P1.27mm*

Polymeric PTC Resettable Fuse 6V 500 mA Ih Surface Mount 0603 (1608 Metric), Concave polyfuse 500mA 0603 The 0603L050YR is a surface-mount resettable fuse based on polymeric positive temperature coefficient technology, designed to provide overcurrent protection in compact electronic circuits. Under normal operating conditions, the device exhibits low resistance and allows current to pass with minimal power loss. When exposed to an overcurrent condition, the device transitions to a high-resistance state, effectively limiting the current and protecting downstream components. Once the fault condition is removed and power is cycled or the device cools, the fuse automatically resets to its original low-resistance state. This component is optimized for space-constrained applications requiring reliable, resettable protection, such as portable electronics, battery-powered systems, and low-voltage signal lines. Its small form factor enables integration into dense PCB layouts while maintaining compliance with industry safety standards for overcurrent protection. Package and Mounting: Surface-mount device in standard 0603 footprint, compatible with automated assembly processes including reflow soldering. Electrical Characteristics: The device is designed to maintain normal operation at a defined hold current level and transition to a protective state when the current exceeds its trip threshold. It operates within low-voltage circuits and provides fast response to fault conditions while minimizing nuisance tripping under typical load variations. Functional Behavior: The fuse operates by increasing resistance sharply in response to thermal energy generated by excess current. This behavior reduces current flow and limits fault energy. After removal of the overcurrent condition, the device gradually returns to its conductive state, enabling repeated use without replacement. Applications: Suitable for use in power lines, battery packs, USB interfaces, consumer electronics, and other low-voltage systems where resettable overcurrent protection is required. Compliance and Reliability: Designed to meet relevant safety and environmental standards for electronic components, ensuring stable performance across specified operating conditions and long-term reliability in field applications. #commonpartslibrary #fuse #Circuit-Protection #PTC #ptc #polymeric

Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green

Power Switch/Driver 1:1 N-Channel 3.8A 6-WQFN-HR (1.5x0.75) The TPS22995RZGR is a high-current, low ON-resistance load switch designed for power distribution and power sequencing applications. It features an integrated N-channel MOSFET capable of handling high load currents while maintaining minimal voltage drop. The device includes controlled rise time to reduce inrush current, making it suitable for sensitive power rails and battery-powered systems. It also integrates thermal shutdown and overcurrent protection, ensuring safe operation under fault conditions. Its compact package and low quiescent current make it ideal for portable and space-constrained designs. Key Features Ultra-low ON-resistance (R_ON) Wide input voltage range High continuous output current capability Controlled slew rate for inrush current limiting Low quiescent current Thermal shutdown protection Reverse current blocking (when disabled) Active high enable pin (ON pin) Compact WQFN package Electrical Characteristics Input Voltage Range: 0.5 V to 5.5 V ON-Resistance (R_ON): Typically ~5 mΩ (VIN = 5 V) Continuous Output Current: Up to 6 A (typical, PCB dependent) Quiescent Current: Typically < 10 µA Shutdown Current: Typically < 1 µA Enable Threshold Voltage: ~0.9 V (typical) Functional Description The TPS22995RZGR operates as a load switch that connects or disconnects a power supply to a load using an internal MOSFET controlled by an enable (ON) pin. When the ON pin is asserted high, the device turns on with a controlled rise time, limiting inrush current. When disabled, the switch turns off quickly and prevents reverse current flow from the output to the input. Integrated protection features such as thermal shutdown ensure reliability during abnormal operating conditions. Absolute Maximum Ratings Input Voltage (VIN): -0.3 V to 6 V ON Pin Voltage: -0.3 V to 6 V Output Voltage (VOUT): -0.3 V to VIN + 0.3 V Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Package Information Package Type: WQFN (RZG) Package Size: 3 mm × 3 mm Mounting Type: Surface Mount Pin Count: 12 Applications Power rail switching Portable electronics USB power distribution Solid-state drives (SSD) Battery-powered systems Embedded systems power management Advantages Minimizes power loss due to low R_ON Reduces system inrush current Enhances system reliability with built-in protections Suitable for high-current, compact designs #commonpartslibrary #integratedcircuit #powermanagement

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726040** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for wire-to-board electrical connections in printed circuit board assemblies. It is used to provide a secure screw-clamp interface between external wiring and PCB circuitry. The component is suitable for control systems, industrial electronics, power distribution circuits, automation equipment, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1726040** Manufacturer: **Phoenix Contact** Product Series: **MKKDSN** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Mounting Type: **Through-Hole PCB Mount** Termination Method: **Screw Connection** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to a PCB. The screw-clamp mechanism secures the wire mechanically and electrically, providing a stable connection for signal or power circuits. The terminal block is intended for applications where field wiring must be removable, serviceable, and mechanically secure. ## Mechanical Description The component uses a compact green housing suitable for PCB-mounted assemblies. It is designed for side-entry conductor connection and horizontal board installation. The terminal block construction supports organized wire routing and convenient access for installation, maintenance, and service work. ## Electrical Description The terminal block is intended for low-voltage power and signal applications within the manufacturer’s specified current and voltage ratings. It provides reliable conductor contact when properly installed with compatible wire sizes and appropriate tightening torque. ## Material and Contact Description The connector housing is typically made from insulating material suitable for electrical safety and PCB assembly use. The internal conductive elements provide the electrical path between the inserted wire and the soldered PCB connection. Proper conductor preparation and screw tightening are required to maintain stable electrical performance. ## Mounting and Assembly Description The component is intended for through-hole solder mounting on a printed circuit board. Proper PCB hole sizing, pad layout, soldering process control, and mechanical clearance should be followed according to the manufacturer’s recommended design and assembly guidance. The terminal block should be mounted in a position that allows safe wire insertion and screw access. ## Application Suitability The **1726040** is suitable for industrial control boards, automation equipment, interface modules, power supply circuits, instrumentation, building control systems, relay boards, sensor wiring interfaces, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for wire gauge compatibility, current rating, voltage rating, tightening torque, creepage and clearance requirements, solder joint strength, and accessibility for field wiring. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, and mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #wiretoboard #connector #interconnect #fixedterminalblock #screwterminal #throughholecomponent #pcbmount #industrialelectronics #automationequipment #controlsystems #powerdistribution #fieldwiring #electronicscomponents #electronicparts #hardwaredesign #pcbdesign #engineeringparts #componentlibrary #electronicsengineering

Bipolar Motor Driver NMOS On/Off, PWM 44-HTSSOP The DRV8262QDDWRQ1 is an automotive-qualified, high-power H-bridge motor driver from Texas Instruments designed for 24 V and 48 V automotive systems. It integrates two H-bridges capable of driving one or two brushed DC motors, a bipolar stepper motor, or thermoelectric coolers (TECs). The device features integrated high-side current sensing, programmable current regulation, and comprehensive protection functions, eliminating the need for external current-sense resistors while reducing PCB area and system cost. It supports wide supply voltages from 4.5 V to 60 V, making it suitable for demanding automotive body electronics and industrial motor control applications. Key Features Automotive AEC-Q100 Grade 1 qualified (-40°C to +125°C) Wide 4.5 V to 60 V operating supply voltage Dual H-bridge or single high-current H-bridge operation Drives: One or two brushed DC motors One bipolar stepper motor One or two thermoelectric coolers (TECs) Up to 8 A peak (dual H-bridge mode) Up to 16 A peak (single H-bridge mode) Low MOSFET on-resistance: 100 mΩ (dual H-bridge) 50 mΩ (single H-bridge) Integrated high-side current sensing with ±4% accuracy Programmable current regulation and current limiting Supports 1.8 V, 3.3 V, and 5 V logic interfaces Configurable PWM control modes (PH/EN or IN/IN) Ultra-low 3 µA sleep current Integrated protection features: Undervoltage Lockout (UVLO) Charge Pump Undervoltage (CPUV) Overcurrent Protection (OCP) Thermal Shutdown (OTSD) Fault output (nFAULT) Functional safety-capable with supporting documentation for automotive system design. #DRV8262QDDWRQ1 #MotorDriver #HBridge #AutomotiveElectronics #BrushedDCMotor #StepperMotor #CurrentSense #AECQ100 #TexasInstruments #EmbeddedSystems #PowerManagement #PCBDesign

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

4.7kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film The CFR-25JB-52-4K7 is a through-hole carbon film resistor manufactured by YAGEO. It has a resistance value of 4.7 kΩ with a ±5% tolerance and is designed for general-purpose electronic circuits, including automotive and industrial applications. The resistor uses an axial leaded package and is compliant with AEC-Q200 automotive reliability standards. Key Features Resistance: 4.7 kΩ Tolerance: ±5% Power Rating: 0.25 W (1/4 W) Resistor Type: Carbon Film Package Type: Axial Through-Hole Operating Temperature: -55°C to +155°C Temperature Coefficient: -500 / +350 ppm/°C Automotive Grade: AEC-Q200 qualified Compact body size: approximately 2.4 mm × 6.3 mm Suitable for: General electronics Signal conditioning Pull-up/pull-down circuits Current limiting Automotive electronics #CommonPartLibrary #ThroughHole #Resistor #Axial

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit Tri-Core 240MHz 8MB (8M x 8) FLASH 289-LFBGA (14x14) ## Engineering Specification ## General Description The **S32K358GHT1MJBST** is an NXP Semiconductors **S32K3 series automotive microcontroller** designed for high-performance embedded control applications in automotive, industrial, and electrically harsh environments. It is built around an **Arm Cortex-M7 architecture** and provides high processing capability, large embedded flash memory, automotive-grade qualification, security support, and a broad set of communication interfaces. The device is suitable for body control, gateway systems, vehicle networking, motor control, domain control, safety-related embedded systems, and general-purpose automotive electronic control units. ## Device Identification Manufacturer Part Number: **S32K358GHT1MJBST** Manufacturer: **NXP Semiconductors** Product Family: **S32K3** Device Category: **Integrated Circuit** Device Type: **Automotive Microcontroller** Core Architecture: **Arm Cortex-M7** Processing Class: **Thirty-Two-Bit MCU** Qualification: **Automotive Grade, AEC-Q100** ## Functional Description The device functions as a high-performance automotive microcontroller for embedded control and communication systems. It provides processing resources for real-time control, communication management, diagnostics, security handling, and system-level application logic. The microcontroller is designed for scalable automotive platforms where software reuse, safety capability, and peripheral integration are important. ## Core and Processing Description The **S32K358GHT1MJBST** uses an Arm Cortex-M7 based processing architecture with tri-core capability and high-speed operation. The core architecture supports digital signal processing, floating-point operation, interrupt handling, and real-time embedded software execution. This makes the device suitable for control systems that require strong computing performance and deterministic response. ## Memory Description The device includes large embedded flash memory for application firmware storage and integrated RAM for runtime operation, data buffering, communication stacks, and control algorithms. The memory architecture is suitable for complex embedded applications requiring large program space, diagnostics, bootloader support, and over-the-air update capability. ## Security and Safety Description The microcontroller includes hardware security support through **HSE-B security** and is intended for automotive applications where secure boot, cryptographic services, protected firmware operation, and system integrity are important. The S32K3 family also supports automotive safety-oriented development through features such as error correction, monitoring, and diagnostic capability. ## Communication and Interface Description The device supports multiple embedded communication interfaces suitable for vehicle and industrial networks. Supported interface types include CAN, Ethernet, I²C, SPI, UART, LIN, QSPI, SAI, SENT, and FlexIO. These interfaces allow the device to communicate with sensors, actuators, transceivers, memory devices, network controllers, and other electronic control units. ## Analog and Peripheral Description The microcontroller includes analog-to-digital conversion capability, timers, watchdog functions, direct memory access, serial audio support, and general-purpose input and output resources. These peripherals support sensing, control, timing, supervision, communication, and system management functions in embedded hardware designs. ## Electrical Description The device is designed for automotive low-voltage operation and supports use across a wide supply voltage range. It is intended for applications requiring reliable operation in automotive and industrial temperature environments. Proper power supply design, decoupling, reset control, clock configuration, and grounding should follow the manufacturer’s hardware design recommendations. ## Package and Mechanical Description The **S32K358GHT1MJBST** is supplied in a **surface-mount LFBGA package** with a compact ball-grid-array footprint. The package is intended for dense printed circuit board layouts requiring careful routing, controlled assembly process, thermal management, and proper solder joint reliability. ## Mounting and Assembly Description The component is intended for automated surface-mount PCB assembly using BGA-compatible manufacturing processes. PCB layout should follow the recommended footprint, ball escape routing, power-plane design, decoupling capacitor placement, thermal design, and inspection requirements for high-density automotive microcontroller assemblies. ## Application Suitability The device is suitable for automotive electronic control units, body control modules, gateway controllers, vehicle networking systems, motor control platforms, battery-related control systems, industrial controllers, safety-oriented embedded systems, and high-performance general-purpose control applications. ## Design Considerations The design should account for supply voltage range, clocking requirements, flash and RAM usage, thermal limits, package routing density, communication interface requirements, EMC performance, boot configuration, security provisioning, debugging access, software safety requirements, and compliance with automotive design guidelines. The device should not be operated beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #integratedcircuit #microcontroller #automotivemcu #nxp #nxpsemiconductors #s32k3 #s32k358 #s32k358ght1mjbst #armcortexm7 #cortexm7 #thirtytwobit #automotiveelectronics #aecq100 #hsesecurity #canfd #ethernet #vehicleelectronics #embeddedhardware #embeddeddesign #ecu #gatewaycontroller #bodycontrolmodule #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

Buzzers Transducer, Externally Driven Piezo 3 V 3mA 4kHz 70dB @ 3V, 10cm Surface Mount Solder Pads The CMT-1603-SMT-TR is a compact, surface-mount piezoelectric buzzer transducer designed for applications requiring an externally driven audible indicator. Featuring a low-profile 16 × 16 mm package, it delivers reliable single-tone sound output with low current consumption, making it suitable for portable electronics, industrial equipment, consumer devices, medical instruments, and embedded systems where PCB space is limited. Key Features: Piezoelectric buzzer transducer (externally driven) Surface-mount (SMT) package with solder pad terminals Compact 16 × 16 × 2.8 mm low-profile design Low current consumption (~3 mA typical) Resonant frequency of 4 kHz Sound pressure level of 70 dB @ 3 V, 10 cm Rated voltage: 3 V Maximum input voltage: 25 Vp-p Single-tone acoustic output Operating temperature range: −30°C to +70°C Tape-and-reel (TR) packaging for automated assembly RoHS compliant #Hashtags: #PiezoBuzzer #AudioTransducer #SurfaceMount #SMTBuzzer #ExternallyDriven #LowProfile #LowCurrent #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #MedicalDevices #RoHS #commonpartslibrary #audio #buzzer

Temperature Sensor Digital, Local -40°C ~ 125°C 10 b 8-MSOP The MCP9808T-E/MS is a high-accuracy digital temperature sensor developed by Microchip Technology for precision thermal monitoring applications. The device communicates through a standard I²C-compatible serial interface and is optimized for low-power embedded systems requiring accurate ambient temperature measurement. It integrates internal temperature sensing, analog-to-digital conversion, programmable alert functionality, and configurable power management within a compact MSOP package. The sensor is designed for applications including industrial monitoring, consumer electronics, IoT devices, thermal management systems, medical instrumentation, and battery-powered portable equipment. Its low operating current and shutdown capability make it suitable for energy-efficient systems where thermal accuracy and minimal power consumption are critical. The device supports programmable temperature limits and interrupt generation for over-temperature events, enabling autonomous thermal supervision without continuous host processor intervention. The MCP9808T-E/MS maintains high measurement accuracy across a wide operating temperature range and offers stable digital output without requiring external calibration components. Electrical Characteristics Supply voltage operation supports low-voltage and standard logic systems. Low operating current enables efficient continuous monitoring. Shutdown mode significantly reduces power consumption during inactive periods. Digital I²C interface supports standard and fast communication modes. Integrated temperature conversion engine provides direct digital temperature output. Temperature Sensing Features High-accuracy ambient temperature measurement. Wide operating temperature range suitable for industrial environments. Programmable resolution for balancing conversion speed and precision. Configurable upper, lower, and critical temperature alert thresholds. Integrated hysteresis control for stable thermal event detection. Communication Interface I²C-compatible serial communication interface. Configurable slave addressing for multi-device bus operation. Supports read and write access to internal configuration registers. Compatible with common microcontrollers and embedded processors. Functional Features Integrated alert output for thermal event signaling. Programmable interrupt and comparator operating modes. Internal registers support temperature monitoring and device configuration. Power-on reset circuitry ensures predictable startup behavior. Device identification registers support system-level verification. Mechanical Characteristics Package type is MSOP with compact surface-mount footprint. Suitable for automated PCB assembly processes. RoHS-compliant and lead-free manufacturing. Typical Applications Industrial temperature monitoring systems. Portable battery-powered electronics. Embedded microcontroller systems. Thermal protection and supervision circuits. Consumer and IoT sensing devices. Medical and laboratory instrumentation. #CommonPartsLibrary #Sensor #Transducer #Temperature-Sensor #MCP9808

Buck-Boost Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 40-VQFN (6x6) The LM51772RHAR is a high-performance multi-phase bidirectional buck-boost controller designed for power conversion systems requiring efficient energy transfer between two voltage domains. The device supports seamless operation in both step-up and step-down modes and is optimized for battery-powered, automotive, industrial, and energy storage applications. The controller enables bidirectional current flow, making it suitable for battery charging, backup power systems, supercapacitor management, and high-power USB Type-C power delivery applications. The device integrates advanced control architecture for high efficiency across a wide operating range while supporting programmable current regulation, voltage regulation, and protection features. Multi-phase capability allows reduced input and output ripple currents, improved thermal distribution, and higher overall power capability. The controller supports external MOSFETs for scalable power design flexibility and includes comprehensive monitoring and fault management functions. The LM51772RHAR is designed for operation in demanding environments with robust protection features including overvoltage protection, undervoltage lockout, cycle-by-cycle current limiting, thermal shutdown, and fault reporting. Its flexible configuration and high integration level reduce external component count and simplify implementation in high-density power systems. Key Features Bidirectional synchronous buck-boost controller architecture Supports power transfer in both forward and reverse directions Multi-phase operation for increased power capability and reduced ripple Wide input and output voltage operating range High-efficiency synchronous control using external MOSFETs Programmable current and voltage regulation Peak and average current control capability Seamless transition between buck, boost, and buck-boost operating modes Integrated current sensing support Programmable switching frequency synchronization Phase interleaving support for thermal and ripple optimization External clock synchronization capability Soft-start and controlled startup sequencing Comprehensive fault detection and protection functions Overcurrent protection and short-circuit protection Overvoltage and undervoltage protection Thermal shutdown protection Fault status reporting and system monitoring support Designed for automotive and industrial power applications Compact thermally enhanced package Typical Applications Bidirectional battery charging systems Energy storage systems Automotive dual-battery architectures USB Type-C Power Delivery systems Backup power and UPS systems Supercapacitor charging and balancing Industrial DC power conversion Renewable energy power management High-power portable electronics Telecom and server power systems Electrical Characteristics Wide operating supply voltage range High switching frequency operation capability High-current multi-phase scalability Precision current regulation accuracy Low standby power consumption High-efficiency synchronous rectification support Programmable dead-time and switching parameters Stable operation across wide temperature range Package Information Package Type: VQFN Package Suffix: RHA Thermally enhanced exposed pad package Surface-mount implementation Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powermanagement #buckboost #dcdcswitchingcontrollers

Ultrahigh Precision Adjustable Current Limited Load Switch with Fault Flag Active Low SOT23-5 #Commonpartslibrary #Integratedcircuit #Powermanagement

Slide Switch SPDT Through Hole, Right Angle The SLW-864574-5A-RA-N-D, manufactured by Same Sky (formerly CUI Devices), is a single-pole double-throw (SPDT) slide switch with a right-angle, through-hole mounting configuration. It features a raised actuator for easy manual operation and is intended for PCB-based applications where space is limited but dependable switching is required. Key Features Switch Type: Slide switch (manual) Circuit Configuration: SPDT (Single Pole Double Throw) Switch Function: ON–ON (selects between two circuits) Contact Timing: Non-shorting (break-before-make) Mounting Type: Through-hole, right-angle Actuator: Raised slide, ~5 mm height Electrical & Mechanical Characteristics Rated Voltage: 50 VDC Rated Current: up to 500 mA Contact Resistance: ≤ 100 mΩ Insulation Resistance: ≥ 100 MΩ Operating Temperature: -20°C to +70°C Mechanical/Electrical Life: ~10,000 cycles Physical Characteristics Dimensions: approx. 8.6 × 4.5 × 6–7 mm Actuator Travel: ~2 mm Termination: PC pins (through-hole soldering) Orientation: Horizontal (right-angle insertion into PCB) #CommonPartsLibrary #Switch