SMD,24x24mm RF Transceiver Modules and Modems RoHS A7670C-LASE is a compact LTE Cat 1 wireless communication module from SIMCom Wireless Solutions designed for IoT and M2M applications. It supports 4G LTE and 2G fallback connectivity, providing reliable cellular data communication for industrial, automotive, security, POS, and remote monitoring systems. The module uses a compact 24 mm × 24 mm LGA+LCC package, making it suitable for space-constrained designs. Key Features LTE Cat 1 cellular module with up to 10 Mbps downlink and 5 Mbps uplink data rates. Supports LTE-FDD, LTE-TDD, GSM, GPRS, and EDGE networks. Compact 24 mm × 24 mm LGA+LCC package for easy migration from 2G, NB-IoT, and Cat-M designs. Operating voltage range of 3.4 V to 4.2 V. Multiple interfaces including: USB 2.0 UART I²C SPI GPIO ADC Integrated TCP/IP protocol stack for internet connectivity. Supports major operating systems including Windows, Linux, and Android through USB drivers. Firmware Over-The-Air update (FOTA/DFOTA) support. Supports LBS (Location Based Service) positioning. TLS/SSL security protocol support for secure communications. AT command compatible cellular modem architecture. Typical Applications Vehicle telematics and fleet management Industrial IoT gateways and routers POS terminals Security and surveillance systems Remote monitoring and telemetry Healthcare and telemedicine devices

ESP32-C3-MINI-1-H4 is a compact, low-power wireless module from Espressif Systems built around the ESP32-C3 SoC. It integrates a 32-bit RISC-V processor, 2.4 GHz Wi-Fi, Bluetooth 5 LE, onboard 4 MB flash memory, crystal oscillator, RF matching circuitry, and a PCB antenna in a small surface-mount package. The module is designed for IoT devices, smart home products, industrial automation, wearable electronics, and wireless sensor applications. Key Features 32-bit RISC-V single-core processor with clock speeds up to 160 MHz. 2.4 GHz Wi-Fi 4 (802.11 b/g/n) connectivity. Bluetooth 5 Low Energy (BLE 5.0) support with long-range capability. 4 MB embedded SPI flash memory (H4 variant). 384 KB ROM and 408 KB SRAM for application execution. Integrated PCB antenna for simplified RF design. USB Serial/JTAG controller for programming and debugging without an external USB-to-UART bridge. Multiple peripheral interfaces: UART SPI I²C I²S PWM GPIO ADC USB JTAG Operating voltage range: 3.0 V to 3.6 V. Supports secure boot, flash encryption, and hardware cryptographic acceleration. Compact SMD module suitable for space-constrained designs. Typical Applications Smart home and home automation devices Wireless sensors and data loggers IoT gateways and edge devices Industrial monitoring and control systems Bluetooth beacons Wearable electronics Consumer connected products H4 Variant Note: The ESP32-C3-MINI-1-H4 version includes 4 MB flash memory and supports an extended operating temperature range up to 105°C, making it suitable for more demanding industrial environments. #RF-Transceiver #ESP32 #Module

These devices contain four independent 2-input AND gates. The SN5408, SN54LS08, and SN54S08 are characterized for operation over the full military temperature range of -55C to 125C. The SN7408, SN74LS08 and SN74S08 are characterized for operation from 0 to 70C. sn7408 SN74S08DR Texas Instruments 50R6765 14-SOIC 1741250

Gates and Inverters SN74HCT00N PDIP-14_L19.3-W6.4-P2.54-LS7.9-BL-1 LCSC Part Number: C354416 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Gates and Inverters CD4077BE PDIP-14_L19.3-W6.4-P2.54-LS7.9-BL-1 LCSC Part Number: C353982 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

M.2 CONN.P=0.5 6.7mm H conn The 91302-67-067R2M is a 67-position M.2 (NGFF) card-edge connector manufactured by UMAX. It is designed for connecting M.2 SSDs and PCIe-based expansion modules to a host PCB. The connector features an M-Key interface, making it suitable for high-speed PCIe storage applications such as NVMe solid-state drives. It is a surface-mount, right-angle receptacle with a 0.5 mm contact pitch and a 6.7 mm height above the PCB. Key Features M.2 M-Key connector Supports M-Key M.2 modules, commonly used for PCIe/NVMe SSDs. 67 contacts (67P) Standard pin count for M-Key M.2 card-edge connections. 0.5 mm pitch Fine-pitch design suitable for compact, high-density PCB layouts. Surface-mount, right-angle mounting Optimized for automated PCB assembly and low-profile system designs. 6.7 mm connector height Provides compatibility with standard M.2 card installation requirements. Female card-edge receptacle Accepts M.2 modules directly without additional adapters. RoHS compliant Meets environmental requirements for lead-free electronic assemblies. Typical Applications NVMe SSD sockets PCIe M.2 storage devices Embedded computing systems Industrial PCs Networking equipment Edge AI and IoT gateways Single-board computers requiring M.2 expansion #CommonPartsLibrary #Connector

Comparator Standard (General Purpose) Open-Drain, Rail-to-Rail 14-TSSOP The TLV902x have an open-drain output that can be pulled-up below or beyond the supply voltage. These devices are designed for low voltage logic translators. The TLV903x have a push-pull output stage capable of sinking and sourcing many milliamps of current to drive LEDs or capacitive loads for MOSFET gates. The TLV90x0 and TLV90x1 are alternate pinouts of the single device. The family is specified for the Industrial temperature range of -40°C to +125°C and are available in a standard leaded and leadless packages. • Supply range: 1.65V to 5.5V • Precision input offset voltage: 300μV • Rail-to-Rail input with fault-tolerance • Typical propagation delay: 100ns • Low quiescent current per channel: 16μA • Low input bias current: 5pA • Open-drain output option (TLV902x) • Push-pull output option (TLV903x) • Full temperature range: -40°C to +125°C • ESD protection: 2kV • Alternate Single Pinout (TLV90x0) #CommonPartsLibrary #IntegratedCircuit #Comparator

Dual-Core Crossover MCU with Arm® Cortex®-M7 and Cortex®-M4 Cores – High-performance crossover microcontroller designed for industrial automation, edge AI, HMI, motor control, robotics, audio processing, IoT gateways, medical devices, and advanced embedded systems. The NXP MIMXRT1173CVM8A integrates an Arm® Cortex®-M7 core running up to 800 MHz and an Arm® Cortex®-M4 core running up to 400 MHz, delivering real-time performance without an external operating system. It features 2 MB on-chip SRAM with support for external program memory, making it suitable for graphics, audio, and complex control applications. The device includes 20-channel 12-bit SAR ADCs, 12-bit DAC, 10/100 Ethernet, USB 2.0 OTG, CAN FD, SD/MMC, I²C, SPI, UART/USART, SAI, SPDIF, LCD interface, camera interface, PWM, DMA, watchdog timers, temperature sensor, and extensive external memory interfaces (SEMC/FlexSPI). It also provides Secure Boot, AES, SHA, TRNG, tamper detection, and other hardware security features for secure embedded applications. Operates from 1.65–1.95 V core and 3.0–3.6 V I/O supplies, over a −40°C to +105°C junction temperature range, and is housed in a 289-ball MAPBGA (14 × 14 mm) package. The MIMXRT1173CVM8A is currently Not Recommended for New Designs (NRND), with MIMXRT1173CVM8B listed as the recommended replacement. #NXP #MIMXRT1173CVM8A #iMXRT1170 #CortexM7 #CortexM4 #DualCoreMCU #CrossoverMCU #IndustrialAutomation #EdgeAI #MotorControl #EmbeddedSystems

Isolated IEEE 802.3af PoE Powered Device (PD) DC-DC Converter Module – High-efficiency isolated Power over Ethernet (PoE) DC-DC converter module designed for IP cameras, VoIP phones, wireless access points, industrial Ethernet devices, IoT gateways, embedded networking equipment, and PoE-powered systems. Delivers a regulated 5 V output at up to 5.1 A (25.5 W) from a 37 V to 57 V PoE input, compliant with IEEE 802.3af PoE Powered Device (PD) requirements. Features 2.25 kVDC input-to-output isolation, up to 90.5% efficiency, low ripple and noise (150 mVp-p max), integrated PoE interface, overcurrent, overvoltage, and short-circuit protection, and support for T2P and adapter OR-ing. Designed for surface-mount assembly in a compact 35.5 × 22.4 × 10.6 mm module, it operates over a −40°C to +85°C temperature range, making it ideal for commercial and industrial embedded power applications. #MurataPowerSolutions #MYBSP0055AABFT #PoEConverter #DCDCConverter #PowerOverEthernet #IEEE8023af #IsolatedPowerModule #IndustrialEthernet #EmbeddedPower #IoT #SurfaceMount #EmbeddedSystems

ARM® Cortex®-M33 STM32H5 Microcontroller IC 32-Bit 250MHz 2MB (2M x 8) FLASH 144-LQFP (20x20) # STM32H573ZIT6 ## General Description The STM32H573ZIT6 is a high-performance microcontroller from STMicroelectronics based on the Arm Cortex-M33 core. It is designed to deliver advanced processing capability, enhanced security, and extensive peripheral integration for industrial, medical, consumer, communications, and embedded control applications. The device combines powerful computational performance with low-power operation, making it suitable for real-time control, edge computing, human-machine interfaces, industrial automation, IoT gateways, motor control systems, and secure connected devices. Integrated security features, high-speed memory architecture, and comprehensive communication interfaces enable the development of robust and scalable embedded solutions. ## Key Features ### Processing Architecture * Arm Cortex-M33 processor core * TrustZone security architecture * Digital signal processing capabilities * Floating-point computation support * Optimized real-time processing performance ### Memory Resources * Embedded Flash memory * Integrated SRAM architecture * Error correction capability for enhanced reliability * High-speed memory access structure ### Security Features * Secure boot functionality * Hardware cryptographic accelerators * Secure firmware update support * Memory protection mechanisms * Tamper detection capabilities * Trusted execution environment * Secure key management support ### Communication Interfaces * USART and UART communication interfaces * SPI serial communication interfaces * I²C communication interfaces * CAN FD connectivity * USB connectivity support * Ethernet interface capability * SDMMC memory card interface * Flexible external communication options ### Analog Features * High-performance analog-to-digital conversion * Digital-to-analog conversion capability * Analog comparators * Precision signal acquisition support ### Timer and Control Functions * Advanced control timers * General-purpose timers * PWM generation capability * Encoder interface support * Motor-control functionality * Real-time clock integration ### Power Characteristics * Low-power operating modes * Dynamic power optimization * Battery-powered application support * Efficient performance-to-power ratio ### Package Characteristics * LQFP package construction * Surface-mount technology compatibility * Industrial-grade mechanical design * Suitable for automated assembly processes ### Application Areas * Industrial Automation Systems * Motor Control Equipment * Human-Machine Interfaces * Smart Energy Systems * Medical Electronics * IoT Gateways * Secure Embedded Devices * Industrial Networking Equipment * Building Automation Systems * Consumer Electronics * Data Acquisition Systems * Edge Computing Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial and Commercial Application Support ## Manufacturer STMicroelectronics ## Product Family STM32H5 Series High-Performance Microcontrollers #STM32H573ZIT6 #STM32H5 #STMicroelectronics #CortexM33 #Microcontroller #EmbeddedSystems #IndustrialAutomation #SecureMCU #IoT #EdgeComputing #MotorControl #EmbeddedDesign #ElectronicsEngineering #FirmwareDevelopment #IndustrialElectronics

Buck-Boost Regulator Positive Output Step-Up/Step-Down DC-DC Controller IC 38-TSSOP-EP Synchronous 4-switch buck-boost controller that regulates output voltage and either output or input current with input voltages above, below, or equal to the output voltage. It supports operation up to 60 V, features an adjustable and phase-lockable switching frequency from 100 kHz to 650 kHz, ±2% output voltage accuracy (1 V to 60 V), split gate-driver outputs, selectable dead time, and is housed in a 38-lead TSSOP-EP package. #PowerManagementIC #DCDCController #BuckBoostController #SynchronousController #AnalogDevices

Microchip KSZ8863RLL, 3-Port Ethernet Switch, MII/RMII, 10 Mbps, 100 Mbps 1.8 V, 3.3 V, 48-Pin LQFP Microchip KSZ8863/KSZ8873 Family – integrated 3-port 10/100 Mbps managed Ethernet switch with built-in PHYs, designed for embedded networking, industrial communication, IoT gateways, automation systems, VoIP devices, and broadband equipment. Features VLAN support, QoS prioritization, IGMP snooping, Rapid Spanning Tree Protocol (RSTP), port mirroring, cable diagnostics, MII/RMII interfaces, SPI/I²C management, MAC filtering, and low-power operation. Provides store-and-forward switching architecture with advanced traffic management and network monitoring capabilities. Search Keywords: KSZ8863, KSZ8873, Microchip Ethernet Switch, 3 Port Ethernet Switch, Managed Ethernet Switch, 10/100 Ethernet Switch IC, Embedded Ethernet Switch, Industrial Ethernet Controller, Integrated PHY Ethernet Switch, RMII Ethernet Switch, MII Ethernet Interface, VLAN Ethernet Switch, QoS Ethernet Switch, IGMP Snooping Switch, Network Processor Interface, Industrial Networking IC, IoT Gateway Ethernet, VoIP Ethernet Controller, Managed LAN Switch, Fast Ethernet Switch Hashtags: #KSZ8863 #KSZ8873 #Microchip #EthernetSwitch #ManagedSwitch #FastEthernet #IndustrialEthernet #EmbeddedNetworking #IntegratedPHY #RMII #MII #VLAN #QoS #IGMPSnooping #IndustrialAutomation #IoTGateway #NetworkController #ElectronicsDesign #PCBDesign #EmbeddedSystems

74HC00 - Quadruple 2 input NAND gates The 74HC00 is a quad 2-input NAND gate IC that belongs to the 74HC (High-speed CMOS) logic family. It contains four independent NAND gates, each with two inputs and one output. This IC is known for its high-speed operation, low power consumption, and compatibility with standard CMOS logic levels. It operates over a wide voltage range, typically from 2V to 6V, making it versatile for various digital logic applications. The 74HC00 is commonly used in digital circuits for implementing logic functions, signal processing, and in applications requiring high-speed and reliable logic operations.

Complex Programmable Logic Device (CPLD) – EEPROM-based in-system programmable CPLD with 128 macrocells, 2,500 usable gates, 68 user I/O pins, and 8 logic array blocks for implementing custom digital logic. Operates from a 4.75 V to 5.25 V supply, features 10 ns maximum pin-to-pin propagation delay, IEEE 1149.1 JTAG boundary-scan, in-system programmability (ISP), and a programmable security bit. Housed in an 84-pin PLCC package and specified for an operating temperature range of 0°C to +70°C. #Altera #EPM7128SLC8410N #EPM7128 #MAX7000S #CPLD #ProgrammableLogic #EEPROM #ISP #JTAG #LogicDevice #PLCC84 #EmbeddedSystems

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support LAN8720A-CP-TR-ABC is a low-power, single-port 10BASE-T/100BASE-TX Ethernet Physical Layer (PHY) transceiver from Microchip Technology. It is designed to connect a microcontroller, processor, or Ethernet MAC to a standard Ethernet network through an RMII (Reduced Media Independent Interface). The device is widely used in embedded networking applications such as industrial controllers, IoT gateways, IP cameras, networked printers, routers, and ESP32-based Ethernet designs. Key Features Single-chip 10/100 Mbps Ethernet PHY Supports both 10BASE-T and 100BASE-TX Ethernet operation. RMII Interface Reduced pin-count interface for easy connection to Ethernet MACs and microcontrollers. IEEE 802.3 / 802.3u Compliant Fully compliant with Fast Ethernet standards. HP Auto-MDIX Support Automatically detects and configures straight-through or crossover Ethernet cables. Auto-Negotiation Automatically selects the best available speed and duplex mode. Flexible I/O Voltage Supports LVCMOS I/O voltages from 1.6 V to 3.6 V, simplifying interfacing with different processors. Integrated 1.2 V Regulator Allows operation from a single 3.3 V supply, reducing external components. Low-Power Architecture Features multiple power-saving modes through Microchip's flexPWR® technology. Built-in Diagnostics and Reliability Features Loopback modes, automatic polarity correction, link-status monitoring, and wake-up detection. Compact Package Available in a 24-pin SQFN/QFN (4 mm × 4 mm) package for space-constrained designs #CommonPartsLibrary #IntegratedCircuit

Shielded RJ45 Connector with Integrated Magnetics (PoE) – Single-port RJ45 Ethernet connector with integrated 10/100Base-T magnetics for industrial Ethernet, embedded networking, IoT gateways, automation equipment, IP cameras, networking devices, and Power over Ethernet (PoE) applications. Features a through-hole, right-angle PCB mount, CAT5e-compliant interface, and supports 10/100Base-T Ethernet, Auto-MDIX, and PoE operation. Includes integrated isolation transformers, common-mode chokes, yellow and green status LEDs, shielded metal housing, board guide for secure mounting, and gold-plated contacts (30 µin / 0.76 µm) for reliable long-term performance. Designed with a tab-down RJ45 orientation, 90° entry, and operates over a −40°C to +85°C temperature range, making it suitable for rugged industrial and embedded networking applications. #WurthElektronik #7499210121A #RJ45Connector #EthernetConnector #IntegratedMagnetics #MagJack #CAT5e #PoE #10100BaseT #IndustrialEthernet #EmbeddedNetworking #IoT #EmbeddedSystems

High-Performance Arm® Cortex®-M33 Microcontroller – 32-bit Arm Cortex-M33 microcontroller with TrustZone® security, DSP, and single-precision FPU for industrial automation, IoT gateways, motor control, medical devices, secure embedded systems, and communication applications. Operates at up to 250 MHz with 2 MB dual-bank Flash memory, 640 KB SRAM with ECC, and a 1.71 V to 3.6 V supply voltage. Features Arm TrustZone® security, AES, PKA, HASH, TRNG cryptographic accelerators, secure boot, debug authentication, and on-the-fly decryption (OTFDEC) for enhanced cybersecurity. Integrates extensive peripherals including Ethernet MAC, USB 2.0 Full-Speed OTG, FDCAN, SDMMC, Octo-SPI, Quad-SPI, I²C, SPI/I²S, UART/USART, SAI, SPDIF, MDIO, 16-channel 12-bit SAR ADC, dual 12-bit DAC, multiple timers/PWM channels, DMA, watchdogs, and RTC. Designed for industrial-grade applications, it operates over a −40°C to +105°C ambient temperature range and is housed in a 100-pin LQFP (14 × 14 mm) package. #STMicroelectronics #STM32H573VIT7 #STM32H5 #STM32H573 #CortexM33 #Microcontroller #TrustZone #SecureMCU #Ethernet #USBOTG #FDCAN #EmbeddedSystems

Cellular, Navigation BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS, GSM, LTE Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount The BG95M3LA-64-SGNS is a compact low-power LTE cellular communication module designed for IoT, telematics, asset tracking, industrial automation, and embedded wireless applications. The module supports global LTE Cat M1, Cat NB2, and EGPRS connectivity, enabling reliable wide-area wireless communication for battery-powered and mobile embedded systems. The device integrates cellular modem functionality, GNSS positioning capability, power management features, and multiple peripheral communication interfaces within a highly compact surface-mount package optimized for space-constrained embedded designs. The module is engineered for low-power operation, making it suitable for long-life IoT deployments requiring efficient wireless connectivity. The BG95M3LA-64-SGNS supports integrated satellite positioning technologies including GPS, GLONASS, Galileo, and BeiDou for location-aware applications. Its robust RF performance and industrial-grade operating capability allow deployment in harsh environmental conditions and demanding remote monitoring systems. The module provides comprehensive support for embedded communication protocols and is commonly used in smart meters, telematics units, industrial gateways, environmental monitoring systems, fleet tracking devices, and connected sensor platforms. Key Features LTE Cat M1 cellular communication support LTE Cat NB2 narrowband IoT capability EGPRS fallback connectivity Integrated GNSS positioning functionality Low-power optimized architecture Global wireless network compatibility Compact surface-mount module design Embedded TCP/IP protocol stack support UART, USB, and serial communication interfaces Integrated power management subsystem Industrial operating temperature support Embedded IoT connectivity optimization High-reliability wireless communication platform Multi-constellation satellite navigation support Electrical Characteristics Low operating power consumption Wide input voltage support High RF sensitivity performance Embedded low-power sleep functionality Stable wireless communication architecture Integrated RF and baseband processing Optimized antenna interface support Industrial-grade reliability performance Fast network registration capability Applications IoT and M2M communication systems Asset tracking devices Fleet management platforms Smart utility metering Industrial automation equipment Remote environmental monitoring Smart agriculture systems Telematics and transportation electronics Portable wireless data terminals Embedded gateway systems Smart city infrastructure Connected sensor platforms Package Information Package Type: LGA Module Mounting Type: Surface Mount Compact embedded wireless module package RoHS compliant configuration available #commonpartslibrary #wirelessmodule #lte #iot #embeddedhardware #cellularcommunication #gnss #telematics #industrialautomation #assettracking

The Broadcom® 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification up to 15,000 V/µs at Vcm = 1000V. This unique design provides maximum AC and DC circuit isolation while achieving TTL compatibility. The optocoupler AC and DC operational parameters are guaranteed from – 40°C to +85°C allowing trouble-free system performance.  15 kV/µs minimum Common Mode Rejection (CMR) at VCM= 1 kV for HCNW2611, HCPL-2611, HCPL-4661, HCPL-0611, HCPL-0661  High speed: 10 MBd typical  LSTTL/TTL compatible  Low input current capability: 5 mA  Guaranteed AC and DC performance over temperature: –40°C to +85°C  Available in 8-Pin DIP, SOIC-8, widebody packages  Strobable output (single channel products only)  Safety approval – UL recognized – 3750 Vrms for 1 minute and 5000 Vrms for 1 minute per UL1577 CSA approved (5000 Vrms/1 Minute rating is for HCNW137/26X1 and Option 020 [6N137, HCPL-2601/11/30/31, HCPL-4661] products only) – IEC/EN/DIN EN 60747-5-5 approved with:  VIORM = 567 Vpeak for 06xx Option 060  VIORM = 630 Vpeak for 6N137/26xx Option 060  VIORM =1414 Vpeak for HCNW137/26x1  MIL-PRF-38534 hermetic version available (HCPL56xx/66xx) #CommonPartsLibrary #Isolator #Optocoupler

IRS2181 Series 600 V 1.9 A 20 V Supply Dual High And Low Side Driver 8-PDIP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #IRS2181