1/1 Transceiver Half CANbus 8-SON (3x3) 3.3-V CAN FD transceiver with 1.7–3.6 V VIO, standby mode, up to 8 Mbps operation, and ±58 V bus-fault protection in a 3 × 3 mm VSON-8 package. #CANFD #CANTransceiver #PhysicalLayer #ISO118982 #8Mbps #58VFaultProtection #LowPowerStandby #VIO #TexasInstruments #PCBComponent

Supervisor Open Drain or Open Collector 1 Channel TSOT-23-8 TPS3436CFDBEDDFRQ1 – Automotive precision window watchdog timer that monitors system operation by supervising watchdog timing and asserting a reset output when timing faults occur. It operates from a 1.04 V to 6.0 V supply, draws 250 nA typical quiescent current, supports factory-programmed or user-programmable watchdog timeout and reset delay, and provides active-low open-drain or push-pull outputs with watchdog enable/disable, startup delay, manual reset, and latched output options. #TexasInstruments #TPS3436CFDBEDDFRQ1 #WatchdogTimer #WindowWatchdog #AutomotiveIC #VoltageSupervisor #ResetSupervisor #NanoPower #EmbeddedSystems #PCBComponents

Hot Swap Controller 1 Channel PCI 24-VQFN (4x4) eFuse power switch, designed to provide programmable inrush current control and circuit protection for 2.7 V to 24 V power rails. It integrates adjustable current limiting, overvoltage protection, undervoltage lockout, reverse current blocking, thermal shutdown, and fault reporting, and supports load currents up to 5 A in a compact 24-pin VQFN package. #PowerSwitch #eFuse #HotSwapController #OvervoltageProtection #CurrentLimiting #TexasInstruments

Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-23-5 Single non-inverting tri-state buffer with a 3-state output, designed to buffer or isolate digital logic signals in automotive applications. It operates from a 4.5 V to 5.5 V supply, accepts TTL-compatible input levels, features an active-low output enable (OE), supports drive capability up to ±8 mA, and is specified for operation over a –40°C to +125°C temperature range in a SOT-23 (DBV) package. #LogicBuffer #TriStateBuffer #Automotive #AHCT #SingleGate #SOT23 #TexasInstruments

Automotive CAN FD Transceiver with Signal Improvement Capability (SIC) – High-speed CAN FD transceiver with Signal Improvement Capability (SIC) for automotive networks, body electronics, ADAS, industrial automation, motor control, and embedded communication systems. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, SIC technology for improved signal integrity on large CAN networks, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, receiver hysteresis (100 mV typical), and failsafe operation for enhanced network reliability. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in an 8-pin SON (3 × 3 mm) wettable-flank package for automated optical inspection (AOI). #TexasInstruments #TCAN1462VDRBRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #SignalImprovementCapability #AutomotiveElectronics #IndustrialCommunication #AECQ100 #EmbeddedSystems

I2C Digital Isolator 3000Vrms 2 Channel 50kV/µs CMTI 8-SOIC (0.154", 3.90mm Width) Isolated I²C Interface IC providing bidirectional isolation for SDA and SCL communication in I²C-compatible systems. It supports bidirectional data transfer up to 1.7 MHz, operates with independent supply voltages of 3.0 V to 5.5 V (Side 1) and 2.25 V to 5.5 V (Side 2), provides 3000 VRMS UL 1577 isolation in the 8-pin SOIC (D) package, and is specified for −40°C to +125°C operation. #TexasInstruments #ISO1640BDR #DigitalIsolator #I2C #I2CIsolator #IsolationIC #Bidirectional #SOIC8 #EmbeddedSystems #PCBComponents

Buffer, ReDriver 4 Channel 20Gbps 40-WQFN (6x4) Linear redriver providing signal conditioning for four high-speed differential channels, designed to extend DisplayPort 2.1 links up to 20 Gbps per channel and AC-coupled HDMI 2.1 source interfaces up to 12 Gbps. It operates from a 3.3 V supply, integrates programmable CTLE equalization with 18 EQ boost and 5 flat gain settings, supports pin-strap, I²C, or EEPROM configuration, and is housed in a 40-pin WQFN (4 mm × 6 mm) package with an –40°C to +85°C operating temperature range. #LinearRedriver #DisplayPort2_1 #HDMI2_1 #SignalConditioning #CTLE #HighSpeedInterface #TexasInstruments #WQFN40 #3V3 #I2C

Automotive 8-Channel Smart Half-Bridge Gate Driver – 8-channel smart half-bridge gate driver for controlling external N-channel MOSFETs in automotive body electronics, motor control, solenoids, relays, LED lighting, and power distribution systems. Operates from a 4.9 V to 37 V supply (40 V absolute maximum) and supports independent half-bridge, PWM, and SPI control modes. Features integrated inline current-sense amplifiers, programmable smart gate drive, charge pump, slew-rate control, dead-time insertion, open-load detection, short-to-battery/ground diagnostics, overcurrent protection, overvoltage protection, shoot-through prevention, thermal warning/shutdown, and comprehensive fault reporting via SPI. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 56-pin VQFN (8 × 8 mm) wettable-flank package. #TexasInstruments #DRV8718SQRVJRQ1 #DRV8718Q1 #GateDriver #HalfBridgeDriver #MOSFETDriver #MotorControl #SmartGateDriver #CurrentSense #Automotive #AECQ100 #SPI #EmbeddedSystems

Synchronous Buck Switching Regulator – Step-down DC-DC converter for generating an adjustable output voltage from a 3 V to 36 V input. The Texas Instruments LMR43610MB3RPER supports up to 1 A output current, a 1 MHz switching frequency, and an adjustable output voltage with a 1 V minimum and 34.2 V maximum. It uses a synchronous rectifier and is housed in a 9-VQFN-HR (2 × 2 mm) surface-mount package. #TexasInstruments #LMR43610 #BuckConverter #DCDCConverter #SwitchingRegulator #PowerManagement #VoltageRegulator #EmbeddedSystems

Multiphase Motor Driver NMOS PWM, SPI 24-WQFN (3x3) Three-phase PWM motor driver designed to drive three-phase brushless DC motors using three integrated MOSFET half-bridges. The DRV8311P operates from 3–20 V, supports up to 5-A peak output current and 200-kHz PWM frequency, and provides a 10-MHz SPI/tSPI interface, integrated current sensing, and a 3.3-V, 100-mA LDO regulator in a 24-pin 3 × 3-mm WQFN package. #MotorDriver #BLDC #PWM #SPI #TexasInstruments

Multichemistry Impedance Track™ stand-alone fuel gauge Battery Fuel Gauge IC for accurate state-of-charge, state-of-health, and runtime prediction of rechargeable battery packs using Texas Instruments' Impedance Track™ algorithm. It supports 1- to 16-series Li-Ion/Li-Polymer, as well as NiMH and lead-acid batteries, communicates via an I²C interface, measures pack voltage up to 65 V, and integrates coulomb counting, temperature sensing, and programmable battery management functions. #BatteryFuelGauge #FuelGaugeIC #BatteryManagement #ImpedanceTrack #CoulombCounter #I2C #LiIon #LiPolymer #NiMH #LeadAcid #TexasInstruments #BQ34Z100R2

VU Meter Dot/Bar Display Driver IC – 10-step analog level display driver for audio VU meters, signal strength indicators, battery level monitors, power meters, and instrumentation displays. Features a logarithmic response matched to human hearing, driving 10 LEDs, LCDs, or vacuum fluorescent (VF) displays in either dot or bar mode. Operates from a single 3 V to 25 V supply, includes an adjustable 1.2 V to 12 V precision voltage reference, and provides programmable constant-current LED outputs (typically 2 mA to 30 mA) without requiring external current-limiting resistors. Supports 70 dB display range, expandable multi-device cascading for higher resolution, and offers fast analog response for real-time level indication. Specified for operation over a 0°C to +70°C temperature range and housed in an 18-pin PDIP package. This device is obsolete/Lifetime Buy and is not recommended for new designs. #TexasInstruments #LM3916N1NOPB #LM3916 #VUDriver #BarGraphDriver #DotBarDisplay #LEDDriver #AudioMeter #LevelIndicator #DisplayDriver #PDIP18 #EmbeddedSystems

Automotive, 0 to 2-V input, precision reinforced isolated amplifier with integrated DC/DC converter Isolated amplifier providing precision isolated voltage sensing with a fixed gain of 1.0, featuring an integrated isolated DC/DC converter for single-supply operation from 3.0 V to 5.5 V. It supports a 0 V to 2 V input range, reinforced isolation rated for 4250 VRMS (UL1577) and 1200 VRMS working voltage, operates over −40°C to +125°C, and is housed in a 16-pin SOIC (DWE) package. #TexasInstruments #AMC3311Q1 #IsolatedAmplifier #IsolationAmplifier #VoltageSensing #IntegratedDCDC #AutomotiveElectronics #SOIC16 #PCBLibrary #ElectronicComponents

Electronic Fuse Regulator High-Side 8A 12-DSBGA (2.43x1.74) eFuse provides circuit protection and power management with bi-directional power delivery. It operates from 3.5 V to 23 V, supports adjustable 1 A to 9 A current limiting, features 12.2 mΩ typical on-resistance, fast overvoltage and short-circuit protection, reverse current blocking, and overtemperature protection. The device is housed in a 12-ball PowerWCSP package with a 2.4 mm × 1.7 mm footprint. #eFuse #PowerProtection #PowerManagement #TexasInstruments

This TPS5430DDA-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply. #referenceDesign #Module #Sublayout #stepDown #voltageRegulator #5V #TPS5430 #TPS5430DDA #reusable #module #powermanagement #texas-instruments #sublayout

14.5V (Typ) Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount SC-70-6 The TPD4E1B06DCKR is a four-channel transient voltage suppression and electrostatic discharge protection device manufactured by Texas Instruments. This integrated protection component is designed to safeguard sensitive electronic interfaces and signal lines from electrostatic discharge events, transient overvoltage conditions, and electrical fast transients commonly encountered in portable and high-speed electronic systems. The device features low capacitance characteristics that make it suitable for protecting high-speed communication interfaces while maintaining signal integrity. It is commonly used in USB interfaces, HDMI ports, communication systems, embedded electronics, consumer devices, and industrial control equipment. The TPD4E1B06DCKR provides robust ESD protection while occupying minimal PCB space due to its compact surface-mount package. Its multi-channel architecture simplifies circuit design by integrating multiple protection lines within a single package, reducing component count and improving overall system reliability in environments exposed to static discharge and transient electrical disturbances. Engineering Specification Device Type Multi-channel ESD and transient protection diode array Protection Configuration Four-channel transient voltage suppression architecture Protection Function Electrostatic discharge protection and transient suppression Interface Compatibility Suitable for high-speed signal and communication interfaces Capacitance Characteristics Low capacitance design for signal integrity preservation Response Characteristics Fast transient response for sensitive electronic protection Signal Integrity Optimized for minimal impact on high-speed data transmission Voltage Protection Clamps transient overvoltage conditions to safe operating levels Package Type SC70 surface-mount package Mounting Style Surface mount technology Reliability Features Robust ESD tolerance and transient immunity enhancement Applications USB interface protection Communication ports Embedded systems Consumer electronics Industrial electronics Portable devices Signal line protection Data interface protection High-speed digital systems I/O port protection Manufacturer Texas Instruments #commonpartslibrary #esdprotection #transientprotection #tvsdiode #signalprotection #texasinstruments #highspeedinterfaces #embeddedhardware #surfaceountcomponents #electronicsdesign #usbprotection #industrialelectronics #communicationinterfaces #circuitprotection #powerelectronics

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) TPS259530DSGT is a highly integrated eFuse (electronic fuse) from Texas Instruments designed to provide advanced circuit protection and power management for systems operating from 2.7 V to 18 V. It integrates a low-resistance MOSFET, adjustable current limiting, fast overvoltage protection, inrush current control, and thermal shutdown features, making it ideal for hot-swap, industrial, consumer electronics, storage, and adapter-powered applications. Key Features Wide input voltage range: 2.7 V to 18 V 34 mΩ typical integrated MOSFET on-resistance Adjustable current limit from 0.5 A to 4 A Fast overvoltage protection with 5 µs typical response time Adjustable undervoltage lockout (UVLO) Adjustable output slew rate (dV/dt) for inrush current control Load current monitor (ILM) output Fault indication (FLT) output Overtemperature protection (OTP) Hot-swap and hot-plug capable IEC 62368-1 certified and UL recognized Compact 8-pin WSON/DSG package Hashtags #TPS259530DSGT #TexasInstruments #eFuse #HotSwapController #CircuitProtection #PowerManagement #OvervoltageProtection #CurrentLimiting #InrushCurrentControl #IndustrialElectronics #EmbeddedSystems #HardwareDesign #ElectronicsEngineering #PowerSupplyProtection #PCBDesign

The TPS54531DDA is a high-efficiency step-down switching regulator designed for converting higher input voltages into regulated lower output voltages. It integrates a power MOSFET, control circuitry, and protection features into a compact package, enabling simplified power supply design for a wide range of industrial, consumer, communication, and embedded applications. The device utilizes current-mode control architecture to provide fast transient response, stable operation, and straightforward loop compensation. It supports a wide input voltage range and delivers efficient power conversion while minimizing external component count. Built-in protection mechanisms enhance system reliability by safeguarding against fault conditions such as overcurrent, undervoltage, and thermal overload. The TPS54531DDA is commonly used in distributed power systems, industrial controllers, networking equipment, telecommunications hardware, battery-powered devices, and embedded computing platforms requiring efficient voltage regulation. Features Integrated high-side power MOSFET High-efficiency buck regulator architecture Wide input voltage operating range Current-mode control operation Adjustable output voltage capability Fast transient response performance Internal soft-start functionality Cycle-by-cycle current limiting protection Thermal shutdown protection Undervoltage lockout protection Frequency compensation support Low standby current operation Compact surface-mount package Suitable for industrial temperature environments Electrical Characteristics Step-down DC/DC conversion topology Fixed switching frequency operation Adjustable output regulation High conversion efficiency across load conditions Stable operation with ceramic output capacitors Integrated power switch architecture Low output voltage ripple performance High load regulation accuracy Applications Industrial automation systems Embedded processors and microcontrollers Communication equipment Networking hardware Distributed power architectures Point-of-load regulators Consumer electronic products Measurement and instrumentation equipment Battery-powered systems Digital control platforms Package Information Package Type: SO PowerPAD package Surface-mount assembly compatible Thermally enhanced package construction Optimized for automated PCB manufacturing Compact footprint for space-constrained designs #commonpartslibrary #integratedcircuit #powermanagement #powersupply #buckconverter #dcdcconverter #switchingregulator #voltageregulator #embeddedsystems #industrialelectronics #powerelectronics #texasinstruments #energyefficiency #electronicsdesign #powersupplycontroller

ISO1412BDW SOIC-16_L10.3-W7.5-P1.27-LS10.3-BL LCSC Part Number: C1544462 ISOW1412 Texas Instruments ISO14xx Series (ISO1410, ISO1412, ISO1430, ISO1450, ISO1452) – galvanically isolated RS-485/RS-422 transceivers designed for industrial communication networks. Combines differential bus transceiver functionality with integrated isolation barrier, providing robust protection against ground potential differences, electrical noise, ESD, EFT, and transient events. Supports up to 50 Mbps data rates, 1/8-unit-load operation for up to 256 nodes, fail-safe receiver functionality, hot-plug operation, and extended industrial temperature range. Available in basic and reinforced isolation versions for industrial automation, energy systems, motor drives, and smart infrastructure. Search Keywords: ISO1410, ISO1412, ISO1430, ISO1450, ISO1452, TI ISO14xx, Isolated RS485 Transceiver, Isolated RS422 Transceiver, Galvanic Isolation, Industrial Communication IC, Reinforced Isolation Transceiver, Basic Isolation Transceiver, RS485 Isolator, Differential Bus Transceiver, 256 Node RS485, Fail Safe Receiver, Industrial Automation Communication, PLC Communication, Modbus Interface, Energy Meter Communication, Motor Drive Communication, High EMC RS485, IEC61000 Protected Transceiver Hashtags: #ISO1410 #ISO1412 #ISO1430 #ISO1450 #ISO1452 #TexasInstruments #RS485 #RS422 #IsolatedTransceiver #GalvanicIsolation #IndustrialCommunication #Modbus #PLC #FactoryAutomation #MotorControl #EnergyManagement #SmartGrid #EmbeddedSystems #ElectronicsDesign #PCBDesign