24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems

Automotive H-Bridge DC Motor Driver IC – Fully integrated 40 V H-bridge motor driver with integrated power MOSFETs for brushed DC motors and one winding of a bipolar stepper motor. Operates from a 4 V to 40 V supply, delivers up to 5 A continuous output current, and features a PWM control interface with integrated current-sense output for motor monitoring. Includes an internal charge pump for high-side gate drive, low-RDS(on) MOSFETs, current regulation, undervoltage lockout (UVLO), overcurrent protection (OCP), thermal shutdown, and shoot-through protection. Qualified to AEC-Q100 Grade 1, operates over a −40°C to +125°C junction temperature range, and is housed in an 18-pin QFN (3 × 4 mm) wettable-flank package. #MonolithicPowerSystems #MPS #MPQ6612AGLEAEC1P #MPQ6612A #MotorDriver #HBridge #BrushedDCMotor #StepperMotor #CurrentSense #PWM #PowerMOSFET #AECQ100 #Automotive #EmbeddedSystems

16V 7mΩ RDS_on Hot-Swap Protection Device with Current Monitoring #ultralibrarian

Voltage supervisor, designed to monitor the supply voltage and generate a reset signal when the monitored voltage falls below the specified threshold. The TLV840MADL29DBVR features a 2.9 V fixed threshold, manual reset (MR) input, active-low reset output, and is housed in a 5-pin SOT-23 (DBV) package, making it suitable for supply-voltage monitoring and reset generation in microprocessor and digital systems. #TexasInstruments #TLV840MADL29DBVR #VoltageSupervisor #ResetSupervisor #PowerMonitoring #VoltageMonitor #ActiveLowReset #ManualReset #SOT23 #DBV #PCB #Electronics #ComponentLibrary

Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8 battery capacity monitor I2C TSSOP*3x3mm*P0.65mm*

Configurable Analog Front-End (AFE) Potentiostat for Electrochemical Sensors – Ultra-low-power programmable analog front-end designed for electrochemical gas sensors, toxic gas detection, air quality monitoring, industrial safety systems, wearable health devices, environmental monitoring, and embedded sensing applications. The Texas Instruments LMP91000 integrates a complete potentiostat and transimpedance amplifier (TIA), enabling direct interfacing with 2-electrode galvanic and 3-electrode amperometric chemical sensors. Operates from a 2.7 V to 5.25 V supply while consuming less than 10 µA typical supply current, making it ideal for battery-powered systems. Features a programmable TIA gain (2.75 kΩ to 350 kΩ), programmable load resistor, programmable cell bias, I²C-compatible interface, integrated temperature sensor, sensor diagnostics, and support for sensor currents from 5 µA to 750 µA full scale. Housed in a compact 14-pin WSON (4 × 4 mm) package and specified for operation over a −40°C to +85°C temperature range. #TexasInstruments #LMP91000SDXNOPB #LMP91000 #AnalogFrontEnd #Potentiostat #ElectrochemicalSensor #GasSensor #AirQualityMonitoring #IndustrialSafety #I2C #LowPower #EmbeddedSystems

Single-Cell Linear Li-Ion Battery Charger & Power Management IC – I²C-controlled single-cell lithium-ion/polymer battery charger with integrated power-path management, system voltage regulation, 16-bit ADC, and 150 mA LDO for wearables, IoT devices, medical electronics, wireless sensors, and portable embedded systems. Supports a programmable fast-charge current from 1.25 mA to 500 mA, operates from a 3.9 V to 6.05 V input, and provides a programmable battery regulation voltage from 3.6 V to 4.6 V in 10 mV steps. Features 10 nA ship mode, power-path management with regulated PMID output, integrated 150 mA low-dropout regulator (LDO), 16-bit ADC for monitoring battery voltage, charge current, input voltage, system voltage, and temperature, 6.2 V input overvoltage protection (OVP), JEITA-compliant temperature monitoring, watchdog timer, safety timers, NTC battery temperature sensing, and I²C programmable charging parameters. Specified for operation over a −40°C to +85°C temperature range and housed in a 20-ball DSBGA package. #TexasInstruments #BQ25157YFPR #BQ25157 #BatteryCharger #LiIonCharger #PowerPath #PowerManagement #PMIC #BatteryManagement #I2C #Wearables #EmbeddedSystems

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

Charger IC Multi-Chemistry 36-VQFN (5x6) Bidirectional buck-boost battery charge controller designed for Li-Ion, Li-polymer, and LiFePO4 batteries, supporting input and battery voltages up to 36 V and 1–7-cell Li-Ion or 1–9-cell LiFePO4 configurations. It provides adjustable 200–600 kHz switching frequency, I²C control, 16-bit ADC monitoring, and input-current regulation from 400 mA to 20 A. Packaged in a 36-pin, 5 mm × 6 mm VQFN. #TexasInstruments #BQ25756E #BatteryCharger #BuckBoost #PowerManagement #I2C #VQFN

Power Management SoC for power bank applications, integrating bidirectional battery charging, synchronous boost conversion, battery management, and system control in a single device. It supports up to 22.5 W fast charging, USB Type-A/Type-C interfaces, lithium-ion/lithium-polymer batteries, integrated power path management, and an I²C interface for configuration and status monitoring. #PowerManagementIC #PowerBankSoC #BatteryCharger #BoostConverter #FastCharging #USBTypeC #USBTypeA #I2C #LithiumBattery #INJOINIC #IP5568

Accelerometer X, Y, Z Axis ±3g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL335BCPZ is a small, thin, low-power, complete 3-axis accelerometer with signal-conditioned voltage outputs. It measures acceleration with a minimum full-scale range of ±3 g. The device outputs analog voltages proportional to acceleration in each of the three orthogonal axes (X, Y, and Z). The accelerometer is designed for low power consumption and high resolution, making it suitable for mobile devices, tilt sensing, motion detection, and vibration monitoring. It operates over a wide temperature range and requires minimal external components, enabling easy integration into compact systems. Functional Overview The ADXL335 uses a capacitive sensing structure to detect acceleration. Changes in acceleration result in differential capacitance changes, which are converted into voltage outputs through an internal signal conditioning circuit. Each axis provides an independent analog output that can be directly interfaced with ADC inputs of microcontrollers or other processing units. Bandwidth for each axis can be adjusted using external capacitors, allowing flexibility depending on application requirements. Electrical Characteristics Supply Voltage Range: 1.8 V to 3.6 V Supply Current: Typical: 350 µA Measurement Range: ±3 g Sensitivity (Typical): 300 mV/g Zero-g Bias Level: Approximately mid-supply voltage Bandwidth: User-selectable via external capacitors Typical range: X, Y axes: up to 1600 Hz Z axis: up to 550 Hz Output Characteristics Output Type: Analog voltage (ratiometric to supply voltage) Number of Axes: Three (X, Y, Z) Output Noise: Low noise suitable for precision motion sensing Cross-Axis Sensitivity: Typically ±1% Mechanical Characteristics Package Type: 16-lead LFCSP (Lead Frame Chip Scale Package) Dimensions: Approximately 4 mm × 4 mm × 1.45 mm Mounting: Surface mount Environmental Specifications Operating Temperature Range: −40°C to +85°C Shock Survivability: Up to 10,000 g Interface Requirements External Components: Requires capacitors for bandwidth setting (one per axis) Output Interface: Direct analog output compatible with ADC inputs Applications Mobile devices and handheld electronics Tilt and orientation sensing Vibration monitoring systems Gaming and motion input devices Industrial instrumentation Wearable electronics Key Features Low power consumption Compact form factor High resolution analog outputs User-adjustable bandwidth Wide operating temperature range Simple integration with minimal external components #commonpartslibrary #sensor #transducer #motionsensor #accelerometer

General ISM < 1GHz LoRa™, LoRaWAN Transceiver Module 863MHz ~ 870MHz, 902MHz ~ 928MHz Antenna Not Included Surface Mount 453-00139R is a compact LoRaWAN® and LoRa® RF transceiver module from Ezurio (formerly Laird Connectivity), designed for long-range, low-power wireless communication in Industrial IoT, smart agriculture, asset tracking, smart cities, and remote monitoring applications. Based on Semtech's SX1262 LoRa transceiver, the module provides excellent RF sensitivity and robust wireless performance while simplifying integration through multiple peripheral interfaces and a surface-mount package. Key Features LoRa® and LoRaWAN® wireless communication support Frequency bands: 863–870 MHz and 902–928 MHz Up to 22 dBm transmit power High receiver sensitivity down to -139.2 dBm Data rates up to 1 Mbps Wide supply voltage range: 2.0 V to 3.7 V Multiple interfaces: UART, SPI, I²C, I²S, ADC, GPIO, PWM, and IrDA Low receive current consumption (typically 7.6–8.1 mA) Operating temperature range: -40°C to +85°C Compact 47-pad surface-mount module Suitable for battery-powered and long-range IoT applications Hashtags #LoRa #LoRaWAN #Ezurio #LairdConnectivity #SX1262 #RFModule #WirelessCommunication #IndustrialIoT #SmartAgriculture #AssetTracking #RemoteMonitoring #SubGHz #IoTModule #EmbeddedSystems #LongRangeWireless

Power Management IC for iMX8M 5V 6A 6 Buck + 5 LDO The PCA9450CHNY is a highly integrated Power Management Integrated Circuit (PMIC) from NXP Semiconductors, specifically designed to power the i.MX 8M family of application processors, particularly the i.MX 8M Plus. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, load switching, voltage monitoring, and system control functions into a single device. The PCA9450C variant features a configurable dual-phase 6 A buck regulator for powering high-current processor cores while supporting Dynamic Voltage Scaling (DVS) for optimized power efficiency. Key Features Six high-efficiency switching regulators (Buck converters) PCA9450C variant supports a configurable 6 A dual-phase buck regulator Three 3 A buck regulators with Dynamic Voltage Scaling (DVS) Remote-sense capability on major buck outputs for IR-drop compensation Five integrated LDO regulators Supports DDR4, LPDDR4, and DDR3L memory configurations 400 mA load switch with active discharge Dual-channel logic level translator Integrated 32.768 kHz crystal oscillator driver Fast-mode Plus (Fm+) 1 MHz I²C interface Programmable power sequencing and voltage control Power ON/OFF and Standby/Run mode control inputs Protection features including UVLO, thermal shutdown, fault monitoring, and soft-start Operating temperature range: −40°C to +105°C 56-pin HVQFN package (7 mm × 7 mm, 0.4 mm pitch) Optimized for i.MX 8M Mini, Nano, and Plus processors, especially the i.MX 8M Plus for the PCA9450C variant. #CommonPartsLibrary #PCA9450CHNY #PCA9450C #NXP #PMIC #PowerManagementIC #PowerSupply #VoltageRegulator #BuckConverter #LDO #DynamicVoltageScaling #DVS #IMX8M #IMX8MPlus #EmbeddedSystems #IndustrialElectronics #PowerManagement #HVQFN56 #Semiconductor #IntegratedCircuit #IC #CommonPartsLibrary #ElectronicsDesign #HardwareDesign #PCBDesign #EmbeddedLinux #IoT #ProcessorPowerManagement #PowerSequencing #SystemPower #NXPSemiconductors

RF System on a Chip - SoC Cortex-M55 250MHz, 2.5D GPU, 4MB MRAM, 3.75MB SRAM, BLE5.4, -20 to +70 C, BGA , 1.71 V to 2.2 V -20C ~ 70C ARM® Cortex®-M55 System On Chip (SOC) IC Apollo510B 250MHz The AP510BFA-CBR is an ultra-low-power MCU System-on-Chip (SoC) designed for advanced embedded and edge-AI applications. It belongs to the Apollo510B series and integrates a powerful ARM Cortex-M55 processor optimized for both performance and energy efficiency. It combines processing, memory, and multiple peripherals into a single BGA package, making it suitable for compact and power-sensitive designs. Key Characteristics Core: ARM Cortex-M55 Max CPU Speed: 250 MHz Architecture: MCU / SoC Flash Memory: 4 MB RAM: ~3.75 MB Connectivity: I2C, SPI, UART, USB Wireless Support: Bluetooth 5.4 (variant dependent) Package: 153-BGA (compact high-density package) Key Features Built on Ambiq’s ultra-low-power SPOT technology Designed for battery-powered and energy-sensitive devices High computational performance for edge AI and DSP workloads Integrated peripherals for embedded system development Typical Applications Wearables (smartwatches, fitness bands) Smart home and IoT devices Edge AI / machine learning nodes Industrial sensors and monitoring systems Wireless communication modules #CommonPartsLibrary #IntegratedCircuit #SoC #Apollo510B

Mobile Communications PMIC 30-WLP (2.62x3.07) The MAX77958EWV+ is a highly integrated USB Type-C and USB Power Delivery (USB PD) controller designed for portable and battery-powered electronic systems. Manufactured by Analog Devices/Maxim Integrated, the device provides complete USB Type-C Configuration Channel (CC) detection, USB PD protocol management, and power path control functionality within a compact wafer-level package. It is optimized for applications requiring flexible USB charging, power negotiation, and accessory support while minimizing external component count and system complexity. The device integrates a USB Type-C Port Controller (TCPC), Power Delivery Policy Engine, BC1.2 charger detection, VCONN management, dead battery support, and integrated protection features. It supports both sink and dual-role power operation, enabling intelligent power negotiation between connected devices and external power adapters. The controller communicates with the host processor through an I²C interface, allowing firmware-based configuration and monitoring. The MAX77958EWV+ is intended for smartphones, tablets, wearable devices, portable computing platforms, docking stations, embedded systems, and other USB Type-C enabled consumer electronics requiring reliable power delivery and advanced USB connectivity management. Electrical Characteristics The device operates from a low-voltage supply optimized for portable electronic systems. It supports USB Type-C and USB Power Delivery specifications with integrated CC line monitoring and protocol handling. The controller includes internal voltage regulation and protection mechanisms to ensure reliable operation during attachment, detachment, and fault conditions. The integrated USB Power Delivery engine supports multiple power profiles and dynamic voltage negotiation. The device supports sink functionality for charging applications and can be configured for dual-role operation depending on system requirements. Low standby current operation enables efficient battery-powered system implementation while maintaining USB attach detection capability. Functional Features Integrated USB Type-C Port Controller compliant with USB Type-C standards USB Power Delivery protocol engine supporting power negotiation and role management Support for sink and dual-role power configurations Integrated BC1.2 charger detection capability Dead battery support for autonomous attachment detection Integrated VCONN switch and cable orientation detection Automatic CC pin monitoring and cable attach detection I²C interface for host processor communication and configuration Integrated interrupt generation for event handling Support for programmable power profiles and policy management Internal fault monitoring and protection features Compact wafer-level package suitable for space-constrained applications Protection Features Overvoltage monitoring on USB Type-C interface lines Short-circuit protection support Thermal protection and fault detection mechanisms Integrated VCONN current limiting ESD protection for external USB interface connections Safe attach and detach handling during cable insertion events Interface Characteristics USB Type-C CC interface compliant with USB Type-C specifications I²C serial communication interface for host control Interrupt output for event notification Integrated support for orientation detection and cable identification Programmable configuration registers accessible through I²C Package Information Package type is wafer-level package optimized for compact portable designs RoHS compliant and suitable for lead-free manufacturing processes Designed for automated surface-mount assembly Applications Smartphones and mobile devices Tablet computers Wearable electronics Portable battery-powered equipment USB Type-C charging systems Embedded USB PD controllers Docking stations and accessories Consumer electronic products requiring USB Type-C connectivity #commonpartslibrary #integratedcircuit #powermanagement #mobilecommunications

Hot Swap Controller 1 Channel General Purpose 32-LQFN (5x5) The NCP81428MNTXG is a high-performance multi-phase synchronous buck controller designed for CPU, GPU, FPGA, ASIC, and high-current core power applications requiring accurate voltage regulation, fast transient response, and high efficiency. The device supports multi-phase operation with integrated gate drivers and advanced control architecture optimized for modern low-voltage, high-current power rails. It is intended for applications requiring dynamic voltage scaling, precise load-line regulation, and reliable system power management in computing, networking, telecommunications, and industrial platforms. The controller operates with external MOSFET stages and supports flexible power stage configuration for optimized thermal and efficiency performance. It incorporates differential voltage sensing, programmable protection features, current balancing between phases, and high-speed transient compensation to maintain stable operation under rapidly changing load conditions. Engineering Specification Manufacturer onsemi Manufacturer Part Number NCP81428MNTXG Device Type Multi-Phase Synchronous Buck Controller with Integrated Gate Drivers Control Topology Voltage Mode Multi-Phase PWM Control Phase Configuration Dual-Phase Controller Architecture Application Focus CPU Core Power GPU Core Regulation FPGA Power Rails ASIC Core Supplies High-Current DC-DC Regulation Input Supply Range Supports Low-Voltage Bias Supply Operation for Digital Power Systems Output Voltage Regulation Programmable Low-Voltage Output Regulation with Differential Remote Sense Capability Switching Frequency Programmable PWM Switching Frequency with Multi-Phase Interleaving Gate Driver Integration Integrated High-Side and Low-Side MOSFET Gate Drivers Current Sensing Supports Inductor DCR Sensing and Sense Resistor Current Monitoring Load-Line Support Programmable Load-Line Regulation and Droop Compensation Voltage Positioning Adaptive Voltage Positioning for Improved Transient Performance Protection Features Overcurrent Protection Overvoltage Protection Undervoltage Protection Thermal Protection Short-Circuit Protection Power-Good Monitoring Power Management Features Soft-Start Control Enable Functionality Phase Balancing Fault Monitoring Sequencing Support Compensation External Compensation Network Support for Loop Stability Optimization Efficiency Features Synchronous Rectification Support Multi-Phase Interleaving for Reduced Ripple Current Optimized Gate Drive Timing Package Type QFN Surface-Mount Package Mounting Type Surface Mount Technology Temperature Range Industrial Operating Temperature Range Target Applications Server Motherboards High-Performance Embedded Computing Networking Equipment Telecommunications Infrastructure Industrial Processing Systems Graphics and Accelerator Platforms #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

24 Bit Analog to Digital Converter 1, 2 Input 1 Sigma-Delta 20-WQFN (3x3) The ADS127L21IRUKR is a high-resolution, low-power delta-sigma analog-to-digital converter designed for precision industrial and instrumentation applications requiring excellent AC and DC performance. The device integrates a single-channel, 24-bit ADC architecture optimized for low noise, wide dynamic range, and high accuracy signal acquisition. It supports simultaneous low-latency and high-resolution measurements, making it suitable for data acquisition systems, energy monitoring, medical instrumentation, vibration analysis, and precision sensor interfaces. The converter incorporates flexible digital filtering options, programmable operating modes, and a high-speed serial communication interface for easy integration into embedded processing systems. Engineering Specification Device Type Low-power, high-resolution delta-sigma analog-to-digital converter Resolution 24-bit Input Channels Single differential analog input channel ADC Architecture Delta-sigma modulator with integrated digital filtering Sampling Performance Supports wide programmable output data rates ranging from low-speed precision measurements to high-speed data acquisition Input Type Differential analog input Reference Input External precision reference supported Signal-to-Noise Performance High dynamic range and low-noise conversion performance suitable for precision sensing applications Digital Filters Integrated selectable digital filters with low-latency and wideband operating modes Communication Interface SPI-compatible serial digital interface Power Supply Operation Low-voltage analog and digital supply operation Power Consumption Optimized low-power operating modes for battery-powered and portable systems Clocking Supports external clock source input Calibration Features Integrated offset and gain calibration capability Temperature Range Industrial operating temperature range Package Type WQFN package Mounting Style Surface-mount device Application Areas Industrial automation, process control, precision instrumentation, medical electronics, seismic monitoring, vibration sensing, energy metering, and sensor signal acquisition systems. #commonpartslibrary #integratedcircuit #analog #digital #converter

Pressure Sensor -0.07PSI ~ 0.07PSI (-0.5kPa ~ 0.5kPa) Differential Male - 0.08" (2.00mm) Tube, Dual 16b 16-SMD Module, Dual Top Ports The SDP31-500PA belongs to the SDP3x series and uses Sensirion’s CMOSens® technology to deliver accurate and stable pressure measurements. It is optimized for applications where small size, fast response, and high accuracy are critical. This sensor measures bidirectional differential pressure up to ±500 Pa, making it suitable for airflow and gas flow monitoring systems. It provides a fully calibrated, temperature-compensated digital output via I²C, simplifying integration with microcontrollers. Pressure type: Differential (±500 Pa range) High accuracy: حوالي ±3% of measured value Digital output: I²C interface with 16-bit resolution Fast response time: suitable for real-time measurements No zero-point drift: ensures long-term stability Compact size: ~8.5 × 5.5 × 5.15 mm Low voltage operation: typically 3.0–3.6 V Temperature compensated: reliable from −40°C to +85°C #CommonPartsLibrary #Sensor #SDP3x