Precision Adjustable Current-Limited Power Distribution Switch #ultralibrarian

Precision Adjustable Current-Limited Power Distribution Switch #ultralibrarian

Coilcraft NA5889-AL is a high-frequency isolated flyback transformer designed specifically for Texas Instruments TPS55340 Boost/SEPIC/Flyback DC-DC converter applications. Optimized for operation around 200 kHz with input voltages from 2.9 V to 32 V, it provides galvanic isolation of up to 1500 Vrms between primary and secondary windings. The transformer features ferrite core construction, low primary DCR, tightly controlled turns ratio, and compact surface-mount packaging. It is intended for isolated power supply designs requiring efficient energy transfer, compact size, and reliable operation in industrial, embedded, communication, instrumentation, and power conversion applications. Typical output configuration supports isolated 12 V at 1 A when used in the reference TPS55340 flyback design. Search Keywords: NA5889-AL, Coilcraft flyback transformer, TPS55340 transformer, isolated DC-DC transformer, flyback converter transformer, SMPS transformer, power transformer SMD, 1500Vrms isolation transformer, Coilcraft NA5889, flyback magnetics, isolated power supply transformer, ferrite transformer, switch mode power supply transformer, DC DC converter magnetics, TPS55340 flyback design Hashtags: #NA5889AL #Coilcraft #FlybackTransformer #Transformer #SMPS #DCDCConverter #TPS55340 #PowerElectronics #IsolatedPowerSupply #Magnetics #FerriteCore #EmbeddedPower #IndustrialElectronics #PowerSupplyDesign #SwitchingPowerSupply #ElectronicsDesign #PowerConversion #SMDTransformer #ElectronicComponents #HardwareDesign

FS8205A dual N-channel enhancement mode MOSFET, 20V drain-source voltage, 6A drain current, low RDS(on) 22.5mΩ at VGS=4.5V and 27mΩ at VGS=2.5V, low gate charge, ±12V gate-source voltage, 26A pulsed drain current, 2W power dissipation, suitable for battery protection, load switch and power management applications, SOT-23-6L surface mount package.

MOSFET N-CH 20V 3.6A SOT-23 The IRLML2502 is a small-signal N-channel enhancement mode power MOSFET designed for low-voltage, high-efficiency switching applications. It is commonly used as a load switch or power control transistor in compact electronic systems such as battery-powered devices, LED drivers, and DC-DC converters. It features a low on-resistance (RDS(on)), which allows it to switch higher currents with minimal power loss and heat generation. The device is optimized for logic-level gate drive, meaning it can be driven directly from microcontrollers (like 3.3 V or 5 V systems). It is packaged in a compact SOT-23 (Micro3) surface-mount package, making it suitable for space-constrained PCB designs. Key Features N-channel enhancement mode MOSFET Drain-source voltage (VDS) up to 20 V Continuous drain current up to ~4.2 A (at 25°C) Very low RDS(on) ≈ 45 mΩ @ VGS = 4.5 V Logic-level gate drive capability (works with 2.5–4.5 V signals) Fast switching performance Compact SOT-23 (Micro3) surface-mount package Low gate charge for efficient switching Suitable for battery-powered and low-voltage applications RoHS compliant, lead-free design #IRLML2502 #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LogicLevelMOSFET #PowerSwitch #ElectronicComponents #EmbeddedSystems #PCBDesign

MP62550/MP62551 Power Distribution Switch is designed for precision current limiting and provides up to 1.5A continuous output current. It offers programmable current limit between 60mA and 1.7A (typ) with ±10% accuracy by an external resistor. The switch includes an 88mΩ N-channel Power MOSFET and operates from 2.5V to 5.5V input voltage. #mp62550 #parts #commonpartslibrary

Dual-channel, high side, power distribution switch, 2.7V-5.5V, Active High Output, DIP-8 mosfet distribution DIP*W7.62mm*

Power Switch/Driver 1:1 N-Channel 3.8A 6-WQFN-HR (1.5x0.75) The TPS22995RZGR is a high-current, low ON-resistance load switch designed for power distribution and power sequencing applications. It features an integrated N-channel MOSFET capable of handling high load currents while maintaining minimal voltage drop. The device includes controlled rise time to reduce inrush current, making it suitable for sensitive power rails and battery-powered systems. It also integrates thermal shutdown and overcurrent protection, ensuring safe operation under fault conditions. Its compact package and low quiescent current make it ideal for portable and space-constrained designs. Key Features Ultra-low ON-resistance (R_ON) Wide input voltage range High continuous output current capability Controlled slew rate for inrush current limiting Low quiescent current Thermal shutdown protection Reverse current blocking (when disabled) Active high enable pin (ON pin) Compact WQFN package Electrical Characteristics Input Voltage Range: 0.5 V to 5.5 V ON-Resistance (R_ON): Typically ~5 mΩ (VIN = 5 V) Continuous Output Current: Up to 6 A (typical, PCB dependent) Quiescent Current: Typically < 10 µA Shutdown Current: Typically < 1 µA Enable Threshold Voltage: ~0.9 V (typical) Functional Description The TPS22995RZGR operates as a load switch that connects or disconnects a power supply to a load using an internal MOSFET controlled by an enable (ON) pin. When the ON pin is asserted high, the device turns on with a controlled rise time, limiting inrush current. When disabled, the switch turns off quickly and prevents reverse current flow from the output to the input. Integrated protection features such as thermal shutdown ensure reliability during abnormal operating conditions. Absolute Maximum Ratings Input Voltage (VIN): -0.3 V to 6 V ON Pin Voltage: -0.3 V to 6 V Output Voltage (VOUT): -0.3 V to VIN + 0.3 V Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Package Information Package Type: WQFN (RZG) Package Size: 3 mm × 3 mm Mounting Type: Surface Mount Pin Count: 12 Applications Power rail switching Portable electronics USB power distribution Solid-state drives (SSD) Battery-powered systems Embedded systems power management Advantages Minimizes power loss due to low R_ON Reduces system inrush current Enhances system reliability with built-in protections Suitable for high-current, compact designs #commonpartslibrary #integratedcircuit #powermanagement

Mini PMIC with Dual 4A/5A Peak Bucks One 2A Load Switch and Input Power Supervisory #ultralibrarian

This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power. #WiFi #MCU #ReferenceDesign #Module #ESP8684 #lock #OLED #RFID #reusable #module #simple-embedded #espressif #sublayout

Mini PMIC with Dual 4A/5A Peak Bucks One 2A Load Switch and Input Power Supervisory #ultralibrarian

HDMI2.0 to DP1.2 with Type-C HDMI 2.0 to DisplayPort 1.2/eDP 1.4 bridge converter with integrated USB Type-C Alternate Mode switch and USB Power Delivery controller. Supports HDMI 2.0 input up to 4K×2K @ 60 Hz, DisplayPort 1.2 output with 4 lanes at up to 5.4 Gbps (HBR2), HDCP 1.4/2.2 input, HDCP 1.3 output, and operates from 1.2 V, 1.8 V, and 3.3 V supply rails in a QFN-64 (7.5 × 7.5 mm) package. #HDMI2_0 #DisplayPort1_2 #eDP1_4 #BridgeConverter #USBTypeC #DisplayPortAltMode #USBPD #HDCP #VideoInterface #QFN64

Intelligent Power High Side Switch, 39V, 7A, SOIC-8 high side switch SOIC*3.9x4.9mm*P1.27mm*

PWM Intelligent Power High Side Switch, 75V, 25A, DPAK-5L high side switch TO?252*

Dual Channel Intelligent Power Low Side Switch, 39V, 4.5A, SOIC-8 dual low side switch SOIC*3.9x4.9mm*P1.27mm*

Intelligent Power Low Side Switch, 39V, 4.5A, DPAK-5L low side switch TO?252*

Mini PMIC with Dual 4A/5A Peak Bucks One 2A Load Switch and Input Power Supervisory #ultralibrarian

6V Mini PMIC with High Efficiency Dual 2.5A/3.5A Buck One Load Switch and Input Power Supervisory #ultralibrarian

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems