1.3 inch oled IIC Serial White OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board VDD GND SCK SDA for Arduino Black #Module #OLED #LCD

XBOX Controller Based on ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

ADS1115 series 16 Bit 860 Samples per Second Analog to Digital Converter (ADC) Evaluation Board Adafruit 1085 ADS1115 Adafruit 4-Channel ADC Breakout based on Texas Instruments ADS1115 (16-bit) or ADS1015 (12-bit) analog-to-digital converter, featuring I2C communication, four single-ended inputs or two differential inputs, programmable gain amplifier (PGA) up to x16, internal voltage reference, programmable comparator, and selectable I2C addresses (0x48–0x4B). Operates from 2.0V to 5.5V and supports interfacing analog sensors with 3.3V and 5V microcontrollers such as Arduino, ESP32, STM32, RP2040, and Raspberry Pi. Search Keywords: Adafruit 4-Channel ADC Breakout, ADS1115 Breakout, ADS1015 Breakout, Adafruit ADS1115, Adafruit ADS1015, I2C ADC Module, 16-bit ADC, 12-bit ADC, 4-channel ADC, differential ADC, programmable gain amplifier, PGA ADC, analog sensor interface, TI ADS1115, TI ADS1015, Raspberry Pi ADC, Arduino ADC module, ESP32 ADC expansion Hashtags: #Adafruit #ADS1115 #ADS1015 #ADCModule #I2CADC #16BitADC #12BitADC #AnalogToDigitalConverter #SensorInterface #DifferentialADC #PGA #Arduino #ESP32 #STM32 #RP2040 #RaspberryPi #DataAcquisition #EmbeddedSystems #AdafruitBreakout

My version/layout of MT3608 DC-DC Step Up Converter Booster for my Lipo Charger Arduino Shield

is a vertical mounting board with an LM393 comparator and 2 LEDs. #IoT #Arduino #part #sensor #LM393

ezBLDC is a two axis smart BLDC motor driver, powered by SimpleFOC. Implementing 2 DRV8313s this board is capable of 12V @ 2.5A / phase for control of up to 2 motors at once. With its onboard smarts, this board can accept simple UART, I2C, or step/dir commands to control complex, real-time, feedback-enabled motion, freeing up the main microcontroller to do other tasks. Implementing the hardware basics for controlling brushless DC motors can be a hassle, but it doesn't have to be. This motor driver allows anyone with an Arduino to get moving with BLDC motors, with easy IO and motor connectors onboard.

Feather-compatible dev board, powered by an STM32L4+ @ 120 MHz with 2MB of Flash and 640KB of RAM Expandable to 55 pins for access to additional I/O and buses Plenty of Flash and RAM for edge ML workloads or complex applications Support for C/C++, Arduino, and CircuitPython CORTEX Debug connector, enabling the use of Visual Studio Code, IAR, and STM32CubeIDE with optional SWD programmer

A speak shield for the arduino uno R3, using the LM386. All through-hole components. #shield #arduino #lm386 ## Usage The output connector is male molex (shrouded), good for cheap laptop speakers like this one: aliexpress.com/item/1005006144805292.html Don't use a speaker under 4ohms. Make sure the arduino is given 5V input. The volume is controlled by a 10k pot.

ZMPT101B is a high-precision current-type voltage transformer designed for AC voltage sensing, monitoring, and power measurement applications. It provides excellent electrical isolation between high-voltage AC lines and low-voltage measurement circuits, making it ideal for energy monitoring systems, smart meters, power analyzers, and microcontroller-based projects using Arduino, ESP32, and similar platforms. Its compact size, high accuracy, and stable performance enable reliable AC voltage measurement while maintaining user safety through galvanic isolation. Key Features High-precision AC voltage measurement Excellent galvanic isolation (up to 4 kV isolation voltage) Wide operating voltage measurement range High accuracy and good linearity Low phase angle error Compact PCB-mount package Suitable for voltage and power monitoring applications Good consistency and long-term stability Compatible with signal conditioning and ADC circuits Operating temperature range: -40°C to +60°C #ZMPT101B #VoltageTransformer #ACVoltageSensor #PowerMonitoring #EnergyMeter #IsolationTransformer #Arduino #ESP32 #IoT #EmbeddedSystems #Electronics #SmartMeter

MODULE_ARDUINO_MKR_ZERO Manufacturer Recommendations N/A Arduino N/A

TTP223 Touch Button Module Capacitor Type Single Channel Self Locking Touch Switch Sensor for Arduino #Module

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Antenna Not Included Surface Mount The ESP32-C3 is a low-power, highly integrated 32-bit microcontroller (MCU) from Espressif Systems that combines 2.4 GHz Wi-Fi and Bluetooth® 5 Low Energy (BLE) connectivity in a single chip. Built around a single-core RISC-V processor running at up to 160 MHz, it is designed for secure, cost-effective IoT and embedded applications. The ESP32-C3 offers excellent wireless performance, low power consumption, robust security features, and a rich set of peripherals, making it ideal for smart home devices, industrial automation, wearable electronics, wireless sensors, and consumer IoT products. Key Features 32-bit RISC-V single-core CPU running up to 160 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 LE Low-power architecture with multiple sleep modes for battery-powered devices Advanced security features including Secure Boot, Flash Encryption, AES, SHA, RSA, HMAC, and hardware random number generator (RNG) Rich peripheral set including GPIO, UART, SPI, I²C, I²S, PWM, ADC, TWAI (CAN), USB Serial/JTAG, and timers Supports external QSPI flash memory and OTA (Over-the-Air) firmware updates Compact package options suitable for space-constrained embedded designs Fully supported by the ESP-IDF, Arduino, and MicroPython development ecosystems #ESP32C3 #Espressif #RISCV #WiFi #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessMCU #LowPower #SmartHome #IndustrialIoT #SecureMCU #EdgeComputing #FirmwareDevelopment

Feather-compatible dev board, powered by an STM32L4+ @ 120 MHz with 2MB of Flash and 640KB of RAM Expandable to 55 pins for access to additional I/O and buses Plenty of Flash and RAM for edge ML workloads or complex applications Support for C/C++, Arduino, and CircuitPython CORTEX Debug connector, enabling the use of Visual Studio Code, IAR, and STM32CubeIDE with optional SWD programmer #blues

CONN SOCKET 4POS 2.54mm SINGLE ROW TH This connector consists of a single row of 4 electrical pins spaced 2.54 mm apart. It is typically available as a male pin header, female header, or wafer connector depending on the application. The part is commonly used for power, signal, UART, GPIO, sensor, and programming connections in embedded systems and prototyping. Key Features 2.54 mm pitch spacing Industry-standard spacing compatible with breadboards and jumper wires 1x4 configuration Single row with 4 contacts/pins Compact PCB connection solution Suitable for board-to-board or wire-to-board applications Easy solder mounting Typically through-hole (THT), though SMT variants may exist Wide compatibility Works with Arduino, Raspberry Pi modules, sensors, and development boards Durable metal contacts Usually tin- or gold-plated for reliable electrical connection Multiple orientations available Straight vertical or right-angle versions Low-cost and widely available Commonly used in consumer electronics and DIY projects Common Applications GPIO and sensor connections UART / serial interfaces Power input/output headers Embedded system prototyping Module interconnections Debug and programming interfaces #CommonPartsLibrary #Connector

Female Headers CONN SOCKET 40POS 2.54mm DUAL ROW TH This connector consists of 40 pins total (2 rows × 20 pins) spaced at 2.54 mm pitch. It is widely used in PCB interconnections, embedded systems, Raspberry Pi-style GPIO headers, Arduino expansion boards, and general prototyping applications. It mates with standard female headers or jumper wires. Key Features Pin configuration: 2×20 (40 pins total) Pitch: 2.54 mm (0.1 inch standard) Mounting type: Through-hole (THT) Orientation options: Vertical or right-angle variants Contact material: Typically brass or phosphor bronze Plating: Tin or gold-plated options for improved conductivity Current rating: Commonly 1A–3A per pin (depends on manufacturer) Voltage rating: Typically up to 250V AC/DC (application-dependent) Compatibility: Standard 2.54 mm female headers and jumper cables Use cases: Development boards, GPIO expansion, debugging interfaces, mezzanine connections #CommonPartsLibrary #Connector

!!!Warning!!! Clone the project instead of making changes to the original design. !!!Warning!!! This is a micro drone made using Arduino Nano and NRF24L01 Battery1 : 3.7V Battery2 : 3.7V Motor : 8520 micro coreless motor Connect NRF24L01 (with adapter module) using jumper wires

Three-Terminal Fixed Positive Voltage Regulator The LM7812T is a three-terminal fixed positive linear voltage regulator IC designed to provide a stable +12V DC output from a higher input voltage source. It belongs to the widely used 78xx series regulators, where “12” indicates the fixed output voltage of 12 volts. It is commonly used in power supply circuits, embedded systems, and electronic devices that require a simple, reliable regulated 12V rail without the complexity of external components. The device operates as a linear regulator, meaning it reduces voltage by dissipating excess energy as heat, so proper heatsinking is often required for higher current loads. Key Features of LM7812T Fixed +12V output voltage Output current up to 1A–1.5A (depending on package and cooling) Input voltage range up to ~35V max Built-in thermal shutdown protection Internal current limiting and short-circuit protection Safe-area compensation for reliable operation No external components required for basic operation Good line and load regulation Low quiescent current (~8 mA typical) Available in TO-220 / TO-3 packages (LM7812T variants) Typical Applications DC power supplies (12V regulated rail) Arduino and microcontroller systems Industrial control electronics Sensor and communication circuits Battery-powered systems requiring stable 12V Audio amplifiers and small motor control circuits #CommonPartsLibrary #IntegratedCircuit #PowerManagement

ARDNANO30NP http://www.mouser.com/datasheet/2/595/Arduino_Nano3_0-220057.pdf Development Boards & Kits - AVR Arduino Nano 3.1 W/ATMEGA328 NO-PIN 5 Gravitech ARD-NANO30NP 992-ARD-NANO30NP https://www.mouser.co.uk/ProductDetail/Gravitech/ARD-NANO30NP?qs=Vxac6xGyzPlh7in3DWNTbQ%3D%3D

USB to Serial Interface, SSOP-28 FTDI USB Serial SSOP*5.3x10.2mm*P0.65mm* The FT232RL is a full-speed USB 2.0 to asynchronous serial data transfer IC. It integrates all the necessary USB protocol handling and UART interface logic, making it very easy to add USB connectivity to embedded devices without requiring complex firmware development. It is commonly used in development boards (like Arduino clones), USB-to-TTL converters, and debugging interfaces. Key Features USB Interface Fully compliant with USB 2.0 Full-Speed (12 Mbps) Integrated USB transceiver (no external components required) Supports USB suspend/resume modes Internal EEPROM for storing USB descriptors (no external EEPROM needed) Serial (UART) Interface Supports standard UART communication (TX, RX) Configurable baud rates from 300 bps up to 3 Mbps Supports hardware flow control (RTS/CTS, DTR/DSR) Bit-bang mode for simple GPIO control Integrated Components Built-in clock generator (no external crystal required) Internal EEPROM for configuration Integrated voltage regulator (3.3V output available for external use) Power Features Operates from 3.3V to 5V Can be powered directly from USB (bus-powered) Low power consumption with sleep mode Driver Support Virtual COM Port (VCP) drivers available for: Windows Linux macOS Also supports direct D2XX driver for advanced applications Package Typically available in SSOP-28 package Common Applications USB-to-serial converters (TTL/RS232) Microcontroller programming and debugging Embedded system communication Industrial and instrumentation interfaces

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.