Bipolar Motor Driver NMOS On/Off, PWM 44-HTSSOP The DRV8262QDDWRQ1 is an automotive-qualified, high-power H-bridge motor driver from Texas Instruments designed for 24 V and 48 V automotive systems. It integrates two H-bridges capable of driving one or two brushed DC motors, a bipolar stepper motor, or thermoelectric coolers (TECs). The device features integrated high-side current sensing, programmable current regulation, and comprehensive protection functions, eliminating the need for external current-sense resistors while reducing PCB area and system cost. It supports wide supply voltages from 4.5 V to 60 V, making it suitable for demanding automotive body electronics and industrial motor control applications. Key Features Automotive AEC-Q100 Grade 1 qualified (-40°C to +125°C) Wide 4.5 V to 60 V operating supply voltage Dual H-bridge or single high-current H-bridge operation Drives: One or two brushed DC motors One bipolar stepper motor One or two thermoelectric coolers (TECs) Up to 8 A peak (dual H-bridge mode) Up to 16 A peak (single H-bridge mode) Low MOSFET on-resistance: 100 mΩ (dual H-bridge) 50 mΩ (single H-bridge) Integrated high-side current sensing with ±4% accuracy Programmable current regulation and current limiting Supports 1.8 V, 3.3 V, and 5 V logic interfaces Configurable PWM control modes (PH/EN or IN/IN) Ultra-low 3 µA sleep current Integrated protection features: Undervoltage Lockout (UVLO) Charge Pump Undervoltage (CPUV) Overcurrent Protection (OCP) Thermal Shutdown (OTSD) Fault output (nFAULT) Functional safety-capable with supporting documentation for automotive system design. #DRV8262QDDWRQ1 #MotorDriver #HBridge #AutomotiveElectronics #BrushedDCMotor #StepperMotor #CurrentSense #AECQ100 #TexasInstruments #EmbeddedSystems #PowerManagement #PCBDesign

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

Battery Fuel Gauge IC Lithium Ion/Polymer 24-TQFN (4x4) The MAX17320G20+ is a high-accuracy, ultra-low-power fuel gauge and battery protector IC designed for 2-cell to 4-cell lithium-ion and lithium-polymer battery packs. The device integrates Maxim Integrated’s ModelGauge™ m5 EZ algorithm to provide precise battery state-of-charge estimation without requiring battery relearning after system resets or battery replacement. It is optimized for portable, wearable, industrial, and IoT battery-powered applications where accurate battery monitoring and robust protection are required. The device combines fuel gauging, battery authentication support, autonomous battery protection, current sensing, and voltage monitoring into a single integrated solution. It includes configurable protection features such as overvoltage, undervoltage, overcurrent, short-circuit, and thermal protection, helping improve system safety and battery reliability. The MAX17320G20+ communicates through an I²C-compatible interface and supports low-power operation for extended battery runtime. Features High-accuracy battery fuel gauge for multi-cell lithium-ion batteries Supports 2-cell to 4-cell battery pack configurations Integrated ModelGauge m5 EZ algorithm with no battery relearning required Integrated battery protector with autonomous safety monitoring Supports overvoltage, undervoltage, overcurrent, short-circuit, and thermal protection Integrated current-sense amplifier for accurate current measurement Low quiescent current optimized for portable and always-on systems I²C-compatible communication interface Configurable alert and interrupt functions Battery aging compensation and cycle tracking Supports battery authentication functionality Integrated ADCs for voltage, current, and temperature monitoring Programmable protection thresholds and timing parameters Low-power hibernate and sleep operating modes Electrical Characteristics Designed for lithium-ion and lithium-polymer battery chemistries Supports battery stack voltages corresponding to 2S to 4S configurations High-resolution voltage, current, temperature, and capacity measurements Low operating current suitable for battery-powered systems Integrated precision coulomb counter Wide operating temperature range suitable for industrial applications Protection Functions Cell overvoltage protection Cell undervoltage protection Charge overcurrent protection Discharge overcurrent protection Short-circuit protection Overtemperature and undertemperature protection Permanent failure detection and fault logging Autonomous FET control for pack isolation Interface and Control I²C serial communication interface Programmable registers for protection and fuel gauge configuration Interrupt and alert outputs for fault and status indication Supports host processor communication and diagnostics Nonvolatile memory for configuration storage Package Information Package type is TQFN Compact surface-mount package suitable for space-constrained designs RoHS compliant and lead-free package option Typical Applications Smart battery packs Portable medical devices Industrial handheld equipment IoT and wireless sensor devices Battery-powered consumer electronics Portable test and measurement systems Rechargeable multi-cell battery systems #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

The BP2866C, manufactured by 晶丰明源半导体, is a high precision buck constant current LED driver designed for universal input offline LED lighting applications. Operating in critical conduction mode, this component is suitable for 85Vac~265Vac input and integrates a 500V power MOSFET. It features patented demagnetization detection technology and high-voltage JFET power supply technology, eliminating the need for a VCC capacitor and starting resistors, thereby minimizing system cost and size. The BP2866C offers precise output current and excellent line regulation through a patent-pending current control method. It includes robust protection functions such as LED short circuit protection, VCC under voltage protection, and thermal regulation. Available in a SOP7 package, it ensures a +5% LED output current accuracy and is ideal for applications like LED candle lights and bulbs.

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

1 18~22 5mm 1x2P 8A 2P 300V Blue 2 1 Plugin,P=5mm Spring Clamp System Terminal Block ROHS #Connector #Terminal-block

Electronic Fuse Regulator High-Side 10A 10-VQFN-HR (2x2) The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current. Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during startup) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are useradjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2-mm × 2-mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range of –40°C to +125°C. • Wide operating input voltage range: 2.7 V to 16 V – 20-V absolute maximum • Integrated FET with low on-resistance: RON = 6 mΩ (typ.) • Fast overvoltage protection – Adjustable overvoltage lockout (OVLO) with 1.2-μs (typ.) response time • Overcurrent protection with load current monitor output (ILM) – Circuit-breaker response – Adjustable threshold (ILIM) 1.5 A – 11 A • ±10% accuracy for ILIM > 5 A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±10% (IOUT ≥ 3 A) • Fast-trip response for short-circuit protection – 640-ns (typ.) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Active low enable input with adjustable undervoltage lockout threshold (OVLO) • Adjustable output slew rate control (dVdt) • Option to drive external FET for reverse current blocking in disabled/OFF state • Overtemperature protection • Quick Output Discharge • Digital outputs – Power Good (PG) and fault indication (FLT) • UL 2367 recognition (pending) • IEC 62368 CB certification (pending) • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a switch-mode synchronous buck-boost charger with full power-path management. It can automatically regulate power flow between the input source, system load, and battery. It supports a wide input range and is designed for USB Type-C™ / USB Power Delivery (USB-PD) systems, enabling both charging and OTG (power output from battery) operation. ⭐ Key Features ⚡ High-performance charging Up to 5 A charge current Supports 1S to 4S battery packs High efficiency (up to ~96% under typical conditions) Programmable switching frequency: 750 kHz or 1.5 MHz 🔋 Wide input support Input voltage range: 3.6 V to 24 V Absolute max rating up to 30 V Supports USB adapters and barrel jack sources Detects USB charging standards (BC1.2, DCP, CDP, HVDCP, etc.) 🔄 Buck-boost power conversion Seamless buck, boost, and buck-boost operation Maintains stable system voltage even when battery is low or input varies 🔌 USB-PD / OTG support USB Power Delivery (PD 3.0 compatible) Supports OTG output (battery powers USB port) OTG voltage range: 2.8 V to 22 V 🧠 Intelligent power management NVDC power path management (system can run without battery) Dual-input power mux controller (select between two power sources) Battery supplement mode (prevents input overload) 📊 Monitoring & control Integrated 16-bit ADC for voltage, current, temperature monitoring Fully I²C configurable Autonomous or host-controlled operation 🛡️ Protection & safety Input and battery over-voltage/over-current protection Thermal regulation and shutdown Charging safety timer MOSFET protection (internal switching FETs included) 📦 Package 29-pin VQFN (4 mm × 4 mm) package Industrial temperature range: -40°C to 85°C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger

Buck Regulator Positive Output Step-Down DC-DC Controller IC 24-VQFN (3.5x5.5) The LM5148RGYR specification defines the engineering requirements for a synchronous buck controller integrated circuit designed for high-efficiency DC-DC power conversion applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable voltage regulation, efficient power management, and long-term operational stability in industrial, automotive, telecommunications, and embedded electronic systems. The device is intended for use in high-performance power supply designs requiring wide input voltage capability, precise output voltage regulation, and high-current conversion efficiency. It controls external power MOSFETs to implement synchronous buck converter topologies suitable for distributed power architectures, industrial automation equipment, networking infrastructure, battery-powered systems, and embedded control applications. Engineering Requirements The controller shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure stable switching performance, low power consumption, and reliable long-term operation. The device shall maintain consistent functionality under specified operating voltage, temperature, and environmental conditions. Electrical characteristics shall provide accurate pulse-width modulation control, stable output voltage regulation, fast transient response, and reliable gate drive capability for external synchronous power MOSFETs. The controller shall maintain predictable switching performance during startup, shutdown, overload, and dynamic load conditions while supporting efficient power conversion. The integrated control architecture shall provide robust regulation, protection features, and compensation capability to ensure stable converter operation across varying input voltages and output load conditions. The device shall maintain operational integrity during power sequencing and fault recovery without compromising system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical performance and reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of functionality. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, material declarations, reliability data, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #BuckController #DCDCConverter #PowerManagement #SynchronousBuck #PowerElectronics #EmbeddedSystems #IndustrialElectronics #QualityAssurance #EngineeringDocumentation

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement

Supervisor Open Drain or Open Collector 1 Channel SOT-23-5 The TPS382x family of supervisors provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET asserts when the supply voltage VDD becomes greater than 1.1V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active low as long as VDD remains less than the threshold voltage, VIT−. An internal timer delays the return of the output to the inactive state (high) to make sure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage (VIT− + VHYS). When the supply voltage drops below the threshold voltage VIT−, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage, VIT–, set by an internal voltage divider. The TPS382x family also offers watchdog time out options of 200ms (TPS3820) and 1.6s (TPS3823, TPS3824, and TPS3828). • Power-on reset generator with a fixed delay time of 200ms (TPS3823, TPS3824, TPS3825, and TPS3828) or 25ms (TPS3820) • Manual reset input (TPS3820, TPS3823, TPS3825, and TPS3828) • Reset output available in active-low (TPS3820, TPS3823, TPS3824, and TPS3825), active-high (TPS3824 and TPS3825), and open drain (TPS3828) • Supply voltage supervision range: 2.5V, 3V, 3.3V, 5V • Watchdog timer (TPS3820, TPS3823, TPS3824, and TPS3828) • Supply current of 15μA (typical) • 5-pin SOT-23 package • Temperature range: −40°C to 85°C (−40°C to 125°C for TPS3823A-33) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Supervisor

Dual ARM® Cortex®-A9 MPCore™ with CoreSight™ System On Chip (SOC) IC Zynq®-7000 Artix™-7 FPGA, 85K Logic Cells 667MHz 400-CSPBGA (17x17) #CommonPartsLibrary #IntegratedCircuit #Embedded #SoC

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit Tri-Core 240MHz 8MB (8M x 8) FLASH 289-LFBGA (14x14) ## Engineering Specification ## General Description The **S32K358GHT1MJBST** is an NXP Semiconductors **S32K3 series automotive microcontroller** designed for high-performance embedded control applications in automotive, industrial, and electrically harsh environments. It is built around an **Arm Cortex-M7 architecture** and provides high processing capability, large embedded flash memory, automotive-grade qualification, security support, and a broad set of communication interfaces. The device is suitable for body control, gateway systems, vehicle networking, motor control, domain control, safety-related embedded systems, and general-purpose automotive electronic control units. ## Device Identification Manufacturer Part Number: **S32K358GHT1MJBST** Manufacturer: **NXP Semiconductors** Product Family: **S32K3** Device Category: **Integrated Circuit** Device Type: **Automotive Microcontroller** Core Architecture: **Arm Cortex-M7** Processing Class: **Thirty-Two-Bit MCU** Qualification: **Automotive Grade, AEC-Q100** ## Functional Description The device functions as a high-performance automotive microcontroller for embedded control and communication systems. It provides processing resources for real-time control, communication management, diagnostics, security handling, and system-level application logic. The microcontroller is designed for scalable automotive platforms where software reuse, safety capability, and peripheral integration are important. ## Core and Processing Description The **S32K358GHT1MJBST** uses an Arm Cortex-M7 based processing architecture with tri-core capability and high-speed operation. The core architecture supports digital signal processing, floating-point operation, interrupt handling, and real-time embedded software execution. This makes the device suitable for control systems that require strong computing performance and deterministic response. ## Memory Description The device includes large embedded flash memory for application firmware storage and integrated RAM for runtime operation, data buffering, communication stacks, and control algorithms. The memory architecture is suitable for complex embedded applications requiring large program space, diagnostics, bootloader support, and over-the-air update capability. ## Security and Safety Description The microcontroller includes hardware security support through **HSE-B security** and is intended for automotive applications where secure boot, cryptographic services, protected firmware operation, and system integrity are important. The S32K3 family also supports automotive safety-oriented development through features such as error correction, monitoring, and diagnostic capability. ## Communication and Interface Description The device supports multiple embedded communication interfaces suitable for vehicle and industrial networks. Supported interface types include CAN, Ethernet, I²C, SPI, UART, LIN, QSPI, SAI, SENT, and FlexIO. These interfaces allow the device to communicate with sensors, actuators, transceivers, memory devices, network controllers, and other electronic control units. ## Analog and Peripheral Description The microcontroller includes analog-to-digital conversion capability, timers, watchdog functions, direct memory access, serial audio support, and general-purpose input and output resources. These peripherals support sensing, control, timing, supervision, communication, and system management functions in embedded hardware designs. ## Electrical Description The device is designed for automotive low-voltage operation and supports use across a wide supply voltage range. It is intended for applications requiring reliable operation in automotive and industrial temperature environments. Proper power supply design, decoupling, reset control, clock configuration, and grounding should follow the manufacturer’s hardware design recommendations. ## Package and Mechanical Description The **S32K358GHT1MJBST** is supplied in a **surface-mount LFBGA package** with a compact ball-grid-array footprint. The package is intended for dense printed circuit board layouts requiring careful routing, controlled assembly process, thermal management, and proper solder joint reliability. ## Mounting and Assembly Description The component is intended for automated surface-mount PCB assembly using BGA-compatible manufacturing processes. PCB layout should follow the recommended footprint, ball escape routing, power-plane design, decoupling capacitor placement, thermal design, and inspection requirements for high-density automotive microcontroller assemblies. ## Application Suitability The device is suitable for automotive electronic control units, body control modules, gateway controllers, vehicle networking systems, motor control platforms, battery-related control systems, industrial controllers, safety-oriented embedded systems, and high-performance general-purpose control applications. ## Design Considerations The design should account for supply voltage range, clocking requirements, flash and RAM usage, thermal limits, package routing density, communication interface requirements, EMC performance, boot configuration, security provisioning, debugging access, software safety requirements, and compliance with automotive design guidelines. The device should not be operated beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #integratedcircuit #microcontroller #automotivemcu #nxp #nxpsemiconductors #s32k3 #s32k358 #s32k358ght1mjbst #armcortexm7 #cortexm7 #thirtytwobit #automotiveelectronics #aecq100 #hsesecurity #canfd #ethernet #vehicleelectronics #embeddedhardware #embeddeddesign #ecu #gatewaycontroller #bodycontrolmodule #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments

Battery Battery Monitor IC Lithium Ion 9-DSBGA The BQ27220YZFR is a highly integrated single-cell battery fuel gauge IC developed for rechargeable lithium-ion and lithium-polymer battery applications. The device utilizes Texas Instruments’ Impedance Track™ algorithm to provide highly accurate battery capacity measurement, state-of-charge estimation, runtime prediction, and battery health monitoring across varying load and temperature conditions. The device is designed for compact portable electronics, wearable devices, IoT products, handheld instruments, and low-power embedded systems requiring precise battery monitoring and extended operating life. The BQ27220YZFR supports system-side fuel gauging without requiring battery pack-side electronics, simplifying battery integration and reducing overall system cost. The fuel gauge continuously monitors battery voltage, current, and temperature to estimate available capacity, remaining runtime, full charge capacity, and state-of-health information. Integrated low-power operation enables ultra-low standby current consumption suitable for always-on battery-powered products. Communication with the host processor is implemented through a standard I²C interface, allowing configuration access, telemetry reporting, and battery parameter monitoring. The device also integrates protection and alert functionality through programmable interrupt outputs and battery condition monitoring features. The BQ27220YZFR is optimized for use with single-cell lithium-based chemistries and supports learning cycles for adaptive battery characterization over product lifetime. Internal data flash memory stores battery profile information and calibration parameters to improve long-term gauging accuracy. The device is supplied in a compact lead-free wafer chip-scale package suitable for space-constrained PCB designs and portable electronics requiring minimal footprint and low-profile assembly. Electrical Characteristics Device Type Single-cell battery fuel gauge and battery monitor IC Battery Chemistry Support Lithium-ion and lithium-polymer rechargeable batteries Input Voltage Range Supports single-cell battery operation Fuel Gauging Method Impedance Track™ algorithm Communication Interface I²C serial interface Measurement Functions Battery voltage monitoring Battery current monitoring Battery temperature monitoring State-of-charge estimation Remaining capacity calculation Full charge capacity estimation State-of-health reporting Runtime prediction Power Consumption Ultra-low operating current for portable applications Temperature Monitoring External thermistor support Host Alert Features Interrupt and alert reporting capability Data Storage Integrated nonvolatile configuration memory Calibration Features Automatic learning and battery characterization support Protection Monitoring Battery condition and system monitoring functions Package Type DSBGA wafer chip-scale package Mounting Style Surface mount Operating Temperature Range Industrial temperature operation suitable for portable electronics Functional Features High-accuracy fuel gauging over battery lifetime Adaptive battery modeling and aging compensation Low-power operation for battery-powered systems Integrated battery profiling capability Real-time remaining runtime estimation Automatic battery learning cycles Compact PCB footprint for portable devices System-side implementation without smart battery pack requirement Programmable battery alert functionality Support for low-power embedded processors and mobile systems Optimized for wearable and IoT applications RoHS compliant and lead-free package construction #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

Charger IC Multi-Chemistry 36-VQFN (5x6) The BQ25750RRVR is a highly integrated switch-mode battery charge controller and power-path management device designed for single-cell to multi-cell lithium-ion and lithium-polymer battery-powered systems. The device supports bidirectional power conversion, enabling both battery charging and system power delivery through USB Type-C and other DC power sources. It integrates high-efficiency buck-boost charging architecture to maintain optimal charging performance across a wide input voltage range. The device is intended for portable electronics, industrial handheld equipment, USB Power Delivery applications, embedded systems, and battery-powered computing platforms requiring advanced power management and flexible charging capability. Integrated power-path management allows simultaneous system operation and battery charging while maintaining battery protection and system stability. The BQ25750RRVR supports programmable charging parameters through an I2C interface, including charge voltage, charge current, input current limit, and system power regulation. The device includes comprehensive protection functions such as overvoltage protection, overcurrent protection, thermal regulation, battery temperature monitoring, and fault reporting. High switching frequency operation enables reduced external component size and compact PCB implementation. Features Integrated synchronous buck-boost battery charger Supports USB Power Delivery and wide DC input sources Bidirectional power conversion capability I2C programmable charging and system parameters Integrated power-path management High-efficiency charging operation Supports multi-cell lithium-ion and lithium-polymer batteries Programmable input current and charge current limits Dynamic power management and system voltage regulation Integrated ADC monitoring for voltage, current, and temperature Battery supplement mode during adapter removal OTG boost mode support Thermal regulation and thermal shutdown protection Input overvoltage and overcurrent protection Battery overvoltage protection Safety timer and watchdog timer support NTC thermistor interface for battery temperature monitoring Interrupt and fault status reporting Compact WQFN package suitable for space-constrained designs Electrical Characteristics Wide input operating voltage range Programmable battery charge voltage High charge current capability Integrated low RDS(on) MOSFET drivers High switching frequency operation High conversion efficiency across operating range Low standby and shutdown current consumption Accurate input and charge current regulation Integrated analog-to-digital converter telemetry Interface and Control I2C serial communication interface Programmable charging profiles Configurable protection thresholds Status and interrupt reporting ADC telemetry reporting Enable and control pins for system integration Protection Features Input overvoltage protection Input overcurrent protection Battery overvoltage protection Thermal shutdown protection Thermal regulation control Short-circuit protection Watchdog timer protection Safety charging timer Battery temperature qualification support Package Information Package Type: WQFN Package Suffix: RRV Compact thermally enhanced package Surface-mount device Suitable for automated PCB assembly processes Applications USB Type-C charging systems Portable computers and tablets Industrial handheld devices Power banks and battery packs Embedded battery-powered systems Portable instrumentation Consumer electronics Smart battery charging platforms #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

16 Bit Digital to Analog Converter 1 10-VSSOP The DAC80501MDGSR is a high-precision, single-channel digital-to-analog converter developed by Texas Instruments for industrial, instrumentation, and embedded control applications requiring accurate voltage output generation. The device integrates a low-drift voltage reference, precision output buffer, and serial peripheral interface communication into a compact low-power solution optimized for high-resolution signal generation. Designed for applications such as programmable power supplies, process control systems, automated test equipment, and sensor calibration, the device delivers excellent linearity, low noise performance, and stable output characteristics across varying environmental conditions. The integrated architecture minimizes external component requirements while maintaining high accuracy and long-term reliability. The converter supports rail-to-rail output operation and offers flexible reference configurations to accommodate different system architectures. Its SPI-compatible digital interface enables straightforward integration with microcontrollers, processors, and FPGA-based systems. Electrical Characteristics The device operates from a single analog supply and supports precision voltage output generation with monotonic performance across the full operating range. Integrated precision reference circuitry provides low temperature drift and stable output characteristics suitable for high-accuracy measurement and control systems. Low glitch energy, low offset error, and low gain error characteristics improve output stability during code transitions. The output amplifier is capable of driving moderate capacitive loads while maintaining signal integrity and settling performance. Interface and Control Communication is implemented through a high-speed SPI-compatible serial interface supporting standard synchronous digital communication protocols. The interface allows direct programming of DAC output codes and internal configuration registers. The device supports daisy-chain capable serial communication architecture for simplified expansion in multi-device systems. Internal registers provide control of reference operation, power management, and output configuration functions. Power Management The DAC80501MDGSR incorporates low-power operating modes intended for energy-sensitive applications. Integrated power-down functionality reduces current consumption during inactive system states while preserving configuration integrity. Internal circuitry is optimized for low quiescent current operation without compromising output precision or dynamic response performance. Package Information The device is supplied in a compact VSSOP surface-mount package suitable for space-constrained industrial and embedded designs. The package configuration supports automated assembly processes and standard PCB manufacturing techniques. Typical Applications Typical applications include industrial automation, programmable voltage sources, data acquisition systems, sensor simulation, instrumentation equipment, motor control systems, and precision calibration platforms. The device is particularly suitable for systems requiring stable and repeatable analog voltage generation with minimal external circuitry. #commonpartslibrary #integratedcircuit #analog #digital #converter

Buck-Boost Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 40-VQFN (6x6) The LM51772RHAR is a high-performance multi-phase bidirectional buck-boost controller designed for power conversion systems requiring efficient energy transfer between two voltage domains. The device supports seamless operation in both step-up and step-down modes and is optimized for battery-powered, automotive, industrial, and energy storage applications. The controller enables bidirectional current flow, making it suitable for battery charging, backup power systems, supercapacitor management, and high-power USB Type-C power delivery applications. The device integrates advanced control architecture for high efficiency across a wide operating range while supporting programmable current regulation, voltage regulation, and protection features. Multi-phase capability allows reduced input and output ripple currents, improved thermal distribution, and higher overall power capability. The controller supports external MOSFETs for scalable power design flexibility and includes comprehensive monitoring and fault management functions. The LM51772RHAR is designed for operation in demanding environments with robust protection features including overvoltage protection, undervoltage lockout, cycle-by-cycle current limiting, thermal shutdown, and fault reporting. Its flexible configuration and high integration level reduce external component count and simplify implementation in high-density power systems. Key Features Bidirectional synchronous buck-boost controller architecture Supports power transfer in both forward and reverse directions Multi-phase operation for increased power capability and reduced ripple Wide input and output voltage operating range High-efficiency synchronous control using external MOSFETs Programmable current and voltage regulation Peak and average current control capability Seamless transition between buck, boost, and buck-boost operating modes Integrated current sensing support Programmable switching frequency synchronization Phase interleaving support for thermal and ripple optimization External clock synchronization capability Soft-start and controlled startup sequencing Comprehensive fault detection and protection functions Overcurrent protection and short-circuit protection Overvoltage and undervoltage protection Thermal shutdown protection Fault status reporting and system monitoring support Designed for automotive and industrial power applications Compact thermally enhanced package Typical Applications Bidirectional battery charging systems Energy storage systems Automotive dual-battery architectures USB Type-C Power Delivery systems Backup power and UPS systems Supercapacitor charging and balancing Industrial DC power conversion Renewable energy power management High-power portable electronics Telecom and server power systems Electrical Characteristics Wide operating supply voltage range High switching frequency operation capability High-current multi-phase scalability Precision current regulation accuracy Low standby power consumption High-efficiency synchronous rectification support Programmable dead-time and switching parameters Stable operation across wide temperature range Package Information Package Type: VQFN Package Suffix: RHA Thermally enhanced exposed pad package Surface-mount implementation Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powermanagement #buckboost #dcdcswitchingcontrollers

2 Position Wire to Board Terminal Block Horizontal with Board 0.375" (9.53mm) Through Hole # 1714971 ## General Description The 1714971 is a high-current printed circuit board terminal block manufactured by Phoenix Contact and designed for secure power and signal connections in industrial and commercial electronic equipment. The component utilizes a screw-clamp termination mechanism that provides reliable wire retention, low contact resistance, and long-term electrical stability. Its robust construction and through-hole mounting design make it suitable for applications requiring dependable field wiring, high-current handling capability, and resistance to mechanical stress. The terminal block is commonly used in power supplies, industrial automation systems, motor controllers, battery management systems, energy distribution equipment, instrumentation, and other applications requiring secure PCB-mounted power connections. ## Key Features ### Mechanical Characteristics * Through-hole PCB mounting * Screw-clamp wire termination * Side-entry wire connection * High-strength housing construction * Secure field-wire installation * Designed for repeated maintenance and servicing operations ### Electrical Characteristics * High-current carrying capability * Low contact resistance * Reliable electrical conductivity * Stable performance under demanding operating conditions * Suitable for power distribution and control applications ### Contact System * Corrosion-resistant conductive contacts * Screw-actuated clamping mechanism * Secure conductor retention * Reliable electrical connection during vibration and mechanical stress ### Material Construction * Industrial-grade thermoplastic housing * High-conductivity metal contacts * Flame-resistant insulation materials * RoHS-compliant construction ### Environmental Characteristics * Suitable for industrial environments * Resistant to mechanical wear * Durable under continuous operation * Designed for long service life ### Application Areas * Industrial Automation Equipment * Power Supply Systems * Motor Control Circuits * Battery Management Systems * Renewable Energy Equipment * Electrical Distribution Panels * Instrumentation Systems * Process Control Equipment * Embedded Power Electronics * Industrial Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade PCB Interconnect Solution ## Manufacturer Phoenix Contact ## Product Family COMBICON PCB Terminal Blocks #PhoenixContact #1714971 #COMBICON #TerminalBlock #PCBTerminalBlock #ScrewTerminal #PowerConnector #IndustrialElectronics #PowerDistribution #IndustrialAutomation #EmbeddedSystems #ControlSystems #ElectronicsDesign #PCBAssembly #ElectricalEngineering

22 Position Receptacle Connector 0.100" (2.54mm) Through Hole Gold The SSW-122-02-G-S is a surface-mount, single-row socket strip designed for reliable board-to-board or component interconnection in electronic assemblies. It is part of a standardized connector series intended for applications requiring compact form factor, consistent electrical performance, and ease of automated placement. The component features a low-profile design suitable for dense PCB layouts and is commonly used in prototyping, embedded systems, and production-level electronics. Design and Construction The connector is manufactured with precision-aligned contacts housed in a high-temperature thermoplastic body, enabling compatibility with standard reflow soldering processes. The contact system is engineered to ensure stable mechanical retention and consistent electrical conductivity, supporting repeated mating cycles without significant degradation. The materials used provide durability, resistance to thermal stress, and compliance with common industry standards for electronic components. Electrical Characteristics The device is intended to provide reliable signal transmission with minimal contact resistance. It supports low to moderate current applications typical of signal-level interconnections. The contact plating is designed to reduce oxidation and maintain stable electrical performance over time. Mechanical Features The connector is configured as a single-row socket with a defined pitch spacing suitable for standard header interfaces. Its surface-mount termination allows for secure attachment to printed circuit boards while minimizing required board space. The structure supports proper alignment during assembly and ensures consistent engagement with corresponding mating connectors. Applications This component is widely used in applications such as microcontroller boards, communication modules, sensor interfaces, and general-purpose electronic systems. It is suitable for both development environments and final product integration where dependable and space-efficient connectivity is required. Compliance and Reliability The SSW-122-02-G-S is designed to meet common industry requirements for environmental and mechanical reliability. It is typically compliant with RoHS standards and suitable for use in a variety of operating conditions encountered in commercial and industrial electronics. #commonpartslibrary #connector #header

Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output The BMI323 is a low-power, high-performance inertial measurement unit developed by Bosch Sensortec. It integrates a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package intended for motion sensing applications requiring precise movement detection, orientation tracking, vibration monitoring, and activity recognition. The device is optimized for wearable electronics, industrial sensing, robotics, navigation systems, IoT devices, and consumer electronics where low power consumption and high motion accuracy are critical. The sensor includes advanced digital signal processing, configurable motion-detection features, programmable interrupts, and integrated FIFO buffering to reduce host processor workload and improve system efficiency. Communication is supported through standard digital interfaces, enabling straightforward integration with microcontrollers and embedded platforms. The BMI323 is designed for robust environmental performance and supports flexible power management modes suitable for battery-operated systems. Engineering Specifications Device Type Six-axis inertial measurement unit consisting of: Three-axis accelerometer Three-axis gyroscope Manufacturer Bosch Sensortec Package Compact LGA surface-mount package suitable for automated assembly processes. Accelerometer Characteristics Supports multiple selectable full-scale measurement ranges for motion and acceleration sensing applications. Provides high-resolution digital output with configurable filtering and sampling parameters for low-noise operation and accurate motion analysis. Gyroscope Characteristics Integrated three-axis angular rate sensor with programmable measurement ranges and digital filtering capabilities. Designed for rotational movement tracking, stabilization, gesture recognition, and inertial navigation applications. Digital Interfaces Supports: I²C serial communication SPI serial communication I3C compatible operation Power Features Designed for ultra-low power operation with multiple configurable power modes to optimize energy consumption for portable and battery-powered devices. Embedded Features Includes integrated: FIFO data buffering Motion detection engine Activity and inactivity detection Tap and gesture detection Orientation and tilt sensing Interrupt generation Self-test functionality Output Data Handling Provides configurable output data rates, oversampling settings, and digital filtering options for balancing performance, bandwidth, and power consumption. Temperature Performance Integrated temperature sensing and compensation support for improved measurement stability across varying environmental conditions. Interrupt System Programmable interrupt outputs support event-driven system architectures and allow efficient host wake-up functionality. Operating Environment Designed for operation across industrial and consumer temperature ranges with stable sensor performance under dynamic motion conditions. Applications Suitable for: Wearable devices Smart watches Fitness trackers Industrial motion monitoring Robotics Drones Navigation systems Gaming controllers AR/VR systems IoT motion sensing Human-machine interfaces #commonpartslibrary #integratedcircuit #accelerometer #sensor

ARM® Cortex®-M4F System On Chip (SOC) IC Apollo3 Blue 96MHz 66-CSP (3.38x3.25) #CommonPartsLibrary #IntegratedCircuit #SOC #AMA3B1KK

# SAM-M10Q-00B Engineering Specifications **General Description** The SAM-M10Q-00B is a compact, ultra-low-power Global Navigation Satellite System receiver module manufactured by u-blox. It is designed to provide highly accurate positioning, navigation, and timing information for battery-powered and space-constrained applications. Built on the u-blox M10 positioning platform, the module supports concurrent reception of multiple satellite constellations, enabling improved positioning accuracy, faster acquisition times, and enhanced reliability in challenging environments such as urban canyons and partially obstructed outdoor locations. Its optimized power architecture significantly reduces energy consumption while maintaining continuous navigation performance. The integrated antenna architecture and compact system-in-package design simplify hardware development by reducing external component requirements. The module is suitable for asset tracking, wearable devices, Internet of Things systems, industrial monitoring equipment, smart city infrastructure, agricultural applications, and portable navigation products. Designed for high-volume embedded applications, the SAM-M10Q-00B combines advanced GNSS technology, low power consumption, and robust positioning performance in a miniature surface-mount package. **Engineering Specifications** **Manufacturer:** u-blox **Manufacturer Part Number:** SAM-M10Q-00B **Component Type:** GNSS receiver module **Technology:** Multi-constellation satellite positioning receiver **GNSS Platform:** u-blox M10 positioning technology **Navigation Function:** Global positioning, navigation, and timing **Satellite Reception:** Concurrent multi-constellation GNSS tracking **Supported Systems:** GPS, Galileo, GLONASS, BeiDou and regional augmentation services **Receiver Architecture:** High-sensitivity GNSS receiver **Positioning Capability:** Real-time location tracking and navigation **Acquisition Performance:** Fast satellite acquisition and reacquisition **Tracking Performance:** Continuous satellite tracking under dynamic conditions **Position Accuracy:** High-precision navigation performance **Sensitivity:** Optimized for weak-signal environments **Power Consumption:** Ultra-low-power operation **Power Supply Configuration:** Single-supply operation **Data Interface:** Serial communication interface for host processor integration **Communication Protocols:** Standard GNSS navigation messaging support **Integrated Features:** Embedded antenna solution and RF front-end integration **Startup Modes:** Cold start, warm start and hot start operation **Timing Capability:** Precision timing and synchronization support **Interference Mitigation:** Advanced signal-processing algorithms for improved reception **System Integration:** Designed for compact embedded applications **Environmental Performance:** Reliable operation in outdoor and industrial environments **Operating Temperature Range:** Industrial temperature range **Package Type:** System-in-package GNSS module **Mounting Style:** Surface mount technology **Package Construction:** Compact low-profile module **Environmental Compliance:** RoHS compliant and lead-free **Reliability Features:** Designed for long-term embedded operation and high-volume production **Typical Applications** Asset tracking devices Internet of Things systems Wearable electronics Portable navigation equipment Fleet management systems Smart city infrastructure Industrial monitoring equipment Agricultural positioning systems Environmental data loggers Personal tracking devices Drone navigation systems Geolocation-enabled sensors Telematics systems Logistics and transportation tracking Battery-powered embedded products #SAMM10Q00B #SAMM10Q #uBlox #GNSS #GPSModule #SatelliteNavigation #PositioningSystem #IoT #AssetTracking #WearableTechnology #EmbeddedSystems #NavigationModule #Telematics #LocationTracking #ElectronicComponents #EngineeringSpecifications