N-Channel 100 V 100A (Tc) 2.5W (Ta), 139W (Tc) Surface Mount PG-TDSON-8-7 BSC040N10NS5ATMA1 is a high-performance 100V N-Channel Power MOSFET from Infineon's OptiMOS™ 5 family. It is designed for high-efficiency switching applications such as switched-mode power supplies (SMPS), synchronous rectification, DC-DC converters, motor drives, battery-powered systems, and industrial power management. The device features extremely low on-resistance, high current capability, and excellent thermal performance, making it suitable for demanding power conversion applications. Key Features N-Channel Enhancement Mode MOSFET 100V Drain-to-Source Voltage (VDS) Ultra-low RDS(on): 4.0 mΩ max @ VGS = 10V Continuous Drain Current up to 100A (package limited) Optimized for high-performance SMPS and synchronous rectification Low gate charge for improved switching efficiency 100% avalanche tested for enhanced robustness Superior thermal resistance and power dissipation Wide operating junction temperature range: -55°C to +150°C RoHS compliant and halogen-free Compact PG-TDSON-8 / SuperSO8 package for high power density designs Typical Applications DC-DC Converters Synchronous Rectifiers Motor Control Battery Management Systems (BMS) Telecom and Industrial Power Supplies Solar Power Systems High-Current Switching Circuits #Infineon #OptiMOS5 #MOSFET #NChannelMOSFET #PowerMOSFET #100V #LowRDSon #SMPS #DCDCConverter #MotorDrive #PowerElectronics #IndustrialElectronics #BSC040N10NS5ATMA1 #HighEfficiency #SynchronousRectification

An AnalogGate in a SPICE model is a CMOS transmission gate comprising parallel-connected PMOS and NMOS transistors, allowing bidirectional signal flow controlled by complementary gate voltages.

High Speed Low Side MOSFET Gate Driver with CMOS inverting and non-inverting inputs, 4.5-18 V, 1.0 A, SOT-23-5 MOSFET gate driver SOT?23?5*

1-A, 100-V half bridge gate driver with 8-V UVLO and high noise immunity 8-WSON #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #LM5109

FS8205A dual N-channel enhancement mode MOSFET, 20V drain-source voltage, 6A drain current, low RDS(on) 22.5mΩ at VGS=4.5V and 27mΩ at VGS=2.5V, low gate charge, ±12V gate-source voltage, 26A pulsed drain current, 2W power dissipation, suitable for battery protection, load switch and power management applications, SOT-23-6L surface mount package.

DC-DC Controllers LM5176PWPR HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-BL-EP LCSC Part Number: C442493 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments LM5176 synchronous 4-switch buck-boost DC/DC controller, regulates output voltage above, below or equal to input voltage, wide 4.2V to 55V input voltage range with 60V absolute maximum, adjustable 0.8V to 55V output voltage, single-inductor buck-boost architecture, current-mode control, high-efficiency buck-boost transition, adjustable switching frequency with optional synchronization and dithering, integrated 2A MOSFET gate drivers, cycle-by-cycle current limit, optional hiccup protection, input UVLO, soft-start, power-good output, output overvoltage protection, available in HTSSOP-28 and QFN-28 packages. Search Keywords: LM5176, Texas Instruments LM5176, TI LM5176, LM5176 buck boost controller, LM5176 4 switch buck boost, LM5176 synchronous buck boost controller, 55V buck boost controller, 4.2V to 55V DC DC controller, adjustable buck boost controller, single inductor buck boost controller, LM5176 HTSSOP-28, LM5176 QFN-28, LM5176 power supply controller, LM5176 USB power delivery, LM5176 battery powered systems, LM5176 LED lighting, LM5176 datasheet Hashtags: #LM5176 #TexasInstrumentsLM5176 #TIBuckBoostController #BuckBoostController #SynchronousBuckBoost #4SwitchBuckBoost #DCDCController #55VController #SingleInductorBuckBoost #CurrentModeController #MOSFETGateDriver #2AGateDriver #AdjustableFrequencyController #UVLOController #PowerGoodController #OutputOVP #HTSSOP28 #QFN28

IR2184 Series Half-Bridge Gate Driver IC with Shutdown and Programmable Deadtime 600V 1.9A to 2.3A 14-DIP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #IR21844v

Half-Bridge Gate Driver IC with shutdown and programmable deadtime 0.35A 600V 14-DIP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #IR21094

High-Side Gate Driver IC Non-Inverting 19-VSSOP The TPS48100QDGXRQ1 is an automotive-grade dual high-side gate driver integrated circuit manufactured by Texas Instruments. It is designed to drive external N-channel power MOSFETs configured as high-side switches, providing the gate-drive voltage and current needed to turn the switches fully on and off with controlled timing. The device targets automotive and other harsh-environment power switching applications where a robust, low quiescent current solution is needed to control loads such as motors, relays, solenoids, lighting, and other inductive or resistive loads powered from a vehicle battery rail. As a member of TI's automotive low-IQ high-side driver portfolio, the device is built to tolerate the wide voltage swings and transient conditions characteristic of automotive electrical systems, including load dump events and cold-crank voltage sags, while maintaining very low standby current draw when the driven loads are not active. This low quiescent current characteristic is particularly valuable in always-on automotive modules, where minimizing parasitic battery drain during vehicle-off states is a key design requirement. The device's two independent driver channels operate synchronously, allowing coordinated control of dual high-side switches from a shared set of control and protection circuitry, which is useful in applications such as dual-channel load switching, H-bridge-adjacent driver stages, or redundant power path control. The non-inverting input structure means that the gate driver outputs follow the logic state of the input control signals directly, simplifying integration with microcontroller-based control logic without requiring additional inverting stages. Internally, the device manages the charge pump or bootstrap circuitry needed to generate a gate voltage above the battery rail, which is necessary to fully enhance an N-channel MOSFET configured in the high-side position. This internal voltage generation simplifies the external bill of materials compared to discrete charge-pump driver implementations. The device is qualified to automotive electronics reliability standards, reflecting the rigorous stress testing and quality requirements expected of components used in vehicle electrical and powertrain-adjacent systems. It is housed in a small-outline surface-mount package suited to space-constrained automotive control module designs, and it is supplied in tape-and-reel or cut-tape packaging formats to support both high-volume automated assembly and lower-volume prototyping needs. Spec Sheet Identification Part Number: TPS48100QDGXRQ1 Device Family: TPS48100-Q1 Manufacturer: Texas Instruments Functional Classification Device Type: Dual high-side gate driver IC Driven Configuration: High-side Channel Type: Synchronous, dual independent drive channels Gate Type Driven: N-channel power MOSFET Input Logic: Non-inverting Electrical Characteristics Supply Voltage Range: Wide automotive-class supply range Quiescent Current: Low-IQ class, optimized for always-on automotive modules Output Drive Current: Symmetric source and sink peak output current Internal Gate Drive Generation: Integrated charge pump/bootstrap-style high-side gate drive generation Protection & Diagnostics Application Context: Suited for protected high-side switching designs typical of the automotive driver family Robustness: Designed to tolerate automotive transient and load-dump conditions Environmental & Qualification Temperature Grade: Extended automotive operating temperature range Automotive Qualification: AEC-Q100 qualified RoHS Compliance: Yes Package Package Type: Small-outline surface-mount package, VSSOP style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, cut-tape, or reel-on-demand packaging options #TPS48100 #TexasInstruments #GateDriver #HighSideDriver #AutomotiveIC #AECQ100 #PowerManagement #MOSFETDriver #LowIQ #VSSOP #SurfaceMount #AutomotiveElectronics #PowerSwitching #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #VehicleElectronics #PCBDesign