Automotive Nano-Power Precision Window Watchdog Timer – Automotive-grade precision window watchdog timer for automotive ECUs, ADAS, industrial controllers, safety-critical embedded systems, and microcontroller supervision. Operates from a 1.04 V to 6.0 V supply with an ultra-low 250 nA typical quiescent current, making it ideal for always-on and battery-powered applications. Features a programmable precision window watchdog with ±10% timing accuracy, factory-programmed or capacitor-programmable watchdog timeout (1 ms to 100 s), programmable reset delay (2 ms to 10 s), watchdog startup delay, open-window to close-window ratio selection (1× to 511×), manual reset (MR) support, latched or non-latched fault output, and open-drain active-low watchdog output for reliable system monitoring. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 8-pin TSOT-23 (DDF) package. #TexasInstruments #TPS3436BFACADDFRQ1 #TPS3436Q1 #WatchdogTimer #WindowWatchdog #SupervisorIC #SystemMonitor #FunctionalSafety #AutomotiveElectronics #AECQ100 #TSOT238 #EmbeddedSystems

Integrated Automotive eFuse with Hot-Swap Controller – Automotive-grade integrated electronic fuse (eFuse) and hot-swap controller for power distribution, automotive ECUs, ADAS, industrial automation, servers, SSDs, and embedded power management. Operates from a 2.7 V to 26 V input supply (30 V absolute maximum) and integrates a 2.7 mΩ MOSFET capable of supporting up to 20 A load current with an adjustable current limit from 2 A to 20 A. Features 1.5% accurate load current monitoring, programmable inrush current control, adjustable overvoltage protection (OVP), undervoltage protection (UVP), reverse current blocking with external blocking FET drive, thermal shutdown, short-circuit protection, fault timer, auto-retry or latch-off fault response, and power-good/fault reporting for robust system protection. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 24-pin VQFN (4 × 4 mm) package. #TexasInstruments #TPS259830ONRGER #TPS25983 #eFuse #HotSwapController #PowerManagement #CurrentMonitoring #InrushControl #CircuitProtection #AutomotiveElectronics #VQFN24 #EmbeddedSystems

This is a BQ24070 li ion charging module created according to the manufacturer's recommendations. The board has a connector with pins for setting modes and 3 power connectors #reusable #module #bms #texas-instruments #sublayout

Automotive 80 V, 2 A Synchronous Buck Converter IC – Automotive-grade synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, battery-powered systems, distributed power, and embedded applications. Operates from a 4.2 V to 80 V input voltage and provides an adjustable output voltage from 1 V to 75 V with up to 2 A continuous output current. Features an integrated high-side and low-side MOSFET, 200 kHz to 2.2 MHz programmable switching frequency, 40 µA typical quiescent current, 98% maximum duty cycle, forced PWM/light-load efficiency modes, spread-spectrum EMI reduction, frequency synchronization, power-good output, fixed soft-start, and pre-biased startup. Includes comprehensive protection with cycle-by-cycle current limiting, hiccup-mode short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient (−40°C to +150°C junction) temperature range and is housed in an 8-pin SO PowerPAD (HSOIC) package. #TexasInstruments #LMR38020FSQDDARQ1 #LMR38020Q1 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SIMPLESWITCHER #HSOIC8 #EmbeddedSystems

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

BQ7961x-Q1 family (BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1) are automotive-grade, functional safety-compliant battery monitoring and balancing ICs from Texas Instruments for high-voltage Battery Management Systems (BMS). The devices support 12, 14, or 16 series-connected lithium-ion battery cells and provide high-accuracy voltage measurements, integrated cell balancing, hardware protection, temperature monitoring, and isolated daisy-chain communication. Designed for hybrid and electric vehicles (HEV/EV) and energy storage systems (ESS), the BQ7961x-Q1 family supports ISO 26262 functional safety up to ASIL D, integrated diagnostics, redundant voltage measurement paths, configurable digital filtering, and stackable architectures for large battery packs. The family offers precise battery state monitoring, enhanced safety, and scalable BMS implementation for automotive and industrial energy storage applications. Search Keywords: BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1, BQ7961x-Q1, Texas Instruments BQ79616, Battery Monitor IC, Battery Management System IC, BMS Controller, Automotive BMS, EV Battery Monitor, Cell Balancing IC, High Voltage Battery Monitor, ISO26262 ASIL-D, Automotive Battery Protection, Lithium Battery Monitor, Energy Storage BMS, Stackable Battery Monitor, Battery Pack Monitoring, Cell Voltage Measurement IC, Electric Vehicle Battery Management Hashtags: #BQ79612Q1 #BQ79614Q1 #BQ79616Q1 #BQ79616HQ1 #BQ7961xQ1 #TexasInstruments #BatteryManagementSystem #BMS #CellBalancing #BatteryMonitor #ElectricVehicle #EVBattery #EnergyStorage #LithiumBattery #AutomotiveElectronics #ISO26262 #ASILD #PowerElectronics #EmbeddedSystems #HardwareDesign BQ79612-Q1

Automotive Smart High-Side Power Switch – Single-channel 100 V smart high-side N-channel power switch for automotive power distribution, electronic fuse (eFuse), load protection, and battery-connected applications. Operates from a 3.5 V to 80 V supply, drives up to 4 A continuous output current, and features an ultra-low 10 mΩ typical RDS(on) for high-efficiency load switching. Includes adjustable current limiting, reverse current blocking, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), short-circuit protection, thermal shutdown, slew-rate control, open-load diagnostics, status flag output, and differential input control. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 19-pin VSSOP (DGX) package. #TexasInstruments #TPS48110AQDGXRQ1 #TPS48110Q1 #SmartHighSideSwitch #HighSidePowerSwitch #EFuse #LoadSwitch #PowerDistribution #Automotive #CurrentLimiting #ReverseBatteryProtection #AECQ100 #EmbeddedSystems

OR Controller P-Channel 1:1 SC-70-6 Ideal diode that provides reverse polarity protection and power path ORing with a low forward voltage drop. The Texas Instruments LM66100-Q1 operates from 1.5 V to 5.5 V, supports up to 1 A continuous current, features an 11 mΩ (typical) integrated MOSFET, includes reverse current blocking, overvoltage protection up to 6 V, and is offered in a 6-pin SC70 (DCK) package. #IdealDiode #PowerPathProtection #ReverseCurrentBlocking #ReversePolarityProtection #PowerORing #Automotive #TexasInstruments #LM66100Q1 #SC70 #1A #15Vto55V

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

1/1 Transceiver Half CANbus 8-SON (3x3) CAN Transceiver, 3.3-V to 5-V CAN FD and CAN interface device supporting high-speed differential communication. Features a 1-Mbps CAN FD data rate, ±58-V bus fault protection, standby mode, and operates from a 4.5-V to 5.5-V supply. Available in a VSON-8 package. #CANTransceiver #CANFD #DifferentialCommunication #TexasInstruments

24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

4-Bit Unidirectional Voltage-Level Translator – Four-channel fixed-direction voltage-level translator for logic-level shifting between mixed-voltage digital interfaces. Operates with independent VCCA and VCCB supplies from 1.08 V to 5.5 V, supports data rates up to 200 Mbps, and features Schmitt-trigger inputs for improved noise immunity. Provides 3-state outputs (OE control), push-pull output drivers, partial power-down support (Ioff), and is 5.5 V tolerant on the I/O side when powered appropriately. Specified for operation over a −40°C to +125°C temperature range and housed in a 14-pin TSSOP package. #TexasInstruments #TXU0304 #TXU0304PWR #LevelTranslator #VoltageTranslator #LogicLevelShifter #4BitTranslator #SchmittTrigger #TriStateOutput #DigitalLogic #TSSOP14 #EmbeddedSystems

8 Channel AFE 24 Bit 42 mW 64-TQFP (10x10) Analog front-end (AFE) for biopotential measurements, designed to acquire low-amplitude signals such as EEG and other electrophysiological data. It integrates eight simultaneous 24-bit delta-sigma ADCs with programmable gain amplifiers (gains of 1, 2, 4, 6, 8, 12, and 24), supports a 2.7 V to 5.25 V analog supply and a 1.65 V to 3.6 V digital supply, communicates through an SPI-compatible interface, and is housed in a 64-pin TQFP package. Hashtags: #AnalogFrontEnd #AFE #Biopotential #EEG #24BitADC #DeltaSigmaADC #ProgrammableGainAmplifier #SPI #EightChannel #TQFP64 #TexasInstruments #MedicalElectronics #ADS1299