ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping

This project is a tag device that uses the ESP32-WROOM-32E to communicate with other BLE devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and 18650 battery. It also has a CH340C chip for USB to serial conversion.. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #tag #18650 #airtag #reusable #module #simple-embedded #espressif

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is a module of ESP8684-WROOM-02C WiFi Module from Espressif Systems. This module has USB C for flashing via CH340, RESET and BOOT buttons, 3.3V regulator and 2 IO connectors #WiFi #BLE #MCU #reusable #module #simple-embedded #espressif #sublayout

This is a climate control system module with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #reusable #module #edge-computing #edgeComputing #stm #sublayout #iot #control #BLE

Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, QFN-40 MCU ARM BLE ANT 2.4GHz 802.15.4 QFN*1EP*5x5mm*P0.4mm*

Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4 SoC, QFN-40 MCU ARM BLE ANT 2.4GHz 802.15.4 QFN*1EP*5x5mm*P0.4mm*

RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, SMD #RF #ESP32 #WiFi #BLE #commonpartslibrary

Programmable Radio-on-Chip With Bluetooth Low Energy, 48-MHz ARM® Cortex®-M0 , 56-QFN CYPRESS PROC BLE CY8BL ARM CORTEX M0 BLUETOOTH QFN QFN*1EP*7x7mm*P0.4mm*

Programmable System-on-Chip With Bluetooth Low Energy, 24/48-MHz ARM® Cortex®-M0 , 56-QFN CYPRESS PSOC BLE CY8 CY8C4 ARM CORTEX M0 BLUETOOTH QFN QFN*1EP*7x7mm*P0.4mm*

BT840F is a Fanstel surface-mount BLE 5 / Thread / Zigbee / IEEE 802.15.4 module based on the Nordic nRF52840, with 1 MB Flash, 256 KB RAM, integrated PCB trace antenna, 1.7–5.5 V operation, and a 15 × 20.8 × 1.9 mm castellated/LGA module package. Tags: BT840F, nRF52840, BLE 5 module, Thread Zigbee, Fanstel

This is a reference design of the ESP8684-WROOM-02UC WiFi module from Espressif Systems. This board has USB C for flashing via CH340, RESET and BOOT buttons, 3.3V regulator and 2 IO connectors #WiFi #BLE #MCU #ReferenceDesign

Classic IoT Dev Board based on ESP32 + SX127x, it has Wi-Fi, BLE, LoRa functions, also Li-Po battery management system, 0.96″ OLED are also included.

Connectivity options include 802.11 b/g/n Wi-Fi, Bluetooth® 5 (BLE), and BLE 5 Mesh support, operating at 2.4GHz for seamless wireless communication. The board is equipped with 2MB PSRAM and 384KB ROM, alongside a wide range of I/O interfaces, including 45 GPIOs, 4 x SPI, 3 x UART, 2 x I2C, 14 x touch pins, 2 x I2S, RMT, LED PWM, USB-OTG, TWAI, and 2 x 12-bit ADCs. It also features DVP for expanded functionality, making it a versatile solution for IoT and embedded applications.

RF System on a Chip - SoC BLE ANT 2.4GHz SOC

JDY-23 is an ultra-low-power Bluetooth 5.0 BLE transparent transmission module operating in the 2.4GHz ISM band using GFSK modulation. The module supports wireless UART-to-BLE communication, enabling seamless data exchange between a microcontroller and smartphones, tablets, or other BLE-enabled devices. It provides up to +4dBm transmit power and a communication range of up to 60 meters under optimal conditions. The module supports configurable AT commands for changing device name, baud rate, advertising parameters, and communication settings. JDY-23 is designed for low-power IoT devices, wireless sensors, smart home equipment, industrial monitoring, wearable electronics, and battery-powered embedded applications requiring simple BLE connectivity. Search Keywords: JDY-23, JDY23, Bluetooth 5.0 module, BLE module, Bluetooth Low Energy module, UART BLE module, transparent transmission module, serial Bluetooth module, wireless UART bridge, 2.4GHz BLE transceiver, AT command BLE module, IoT Bluetooth module, low power Bluetooth module, embedded BLE module, MCU Bluetooth interface, Bluetooth serial communication, smart home BLE module, sensor BLE module, battery powered BLE module Hashtags: #JDY23 #Bluetooth5 #BLE #BluetoothLowEnergy #UARTBLE #BluetoothModule #WirelessCommunication #IoT #EmbeddedSystems #Microcontroller #SmartHome #WearableElectronics #SensorNode #LowPowerDesign #WirelessUART #ATCommands #2_4GHz #Electronics #PCBDesign #ElectronicComponents

ESP32-S3-Zero is a compact Waveshare castellated development module based on the dual-core 240 MHz ESP32-S3FH4R2, featuring 2.4 GHz Wi-Fi, Bluetooth 5 LE, 4 MB Flash, 2 MB PSRAM, an onboard USB Type-C port, and a ceramic antenna. Keywords: ESP32-S3-Zero, Wi-Fi BLE module, ESP32-S3 development board, castellated module, USB Type-C

EG915UEUAB-N05-SNNSA*IOT Multiprotocol Modules LTE Cat 1 + 2G, cloud enabled, 8M, w/o GNSS, w/ BLE, w/ Wi-Fi scan

1The ESP32-C3-DEVKIT-RUST-1 from Espressif Systems is a development platform designed for RF, RFID, and wireless applications. Built around the ESP32-C3-MINI IC, it supports Bluetooth (BLE) and IEEE 802.11 b/g/n Wi-Fi at 2.4GHz, providing reliable connectivity for wireless communication projects. Powered by a 32-bit RISC-V single-core processor running up to 160MHz, the board features 384KB ROM, 400KB SRAM, and 22 programmable GPIO pins for extensive interfacing. It also includes 3 x SPI, 2 x UART, 1 x I2C, 1 x I2S, RMT (Remote Control Peripheral), LED PWM, and a General DMA controller, making it ideal for developing Bluetooth and Wi-Fi-enabled devices and exploring the ESP32-C3-MINI's capabilities in IoT projects.

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

2.4GHz -98dBm SMD,19.2x18mm RF Transceiver Modules and Modems RoHS The ESP32-WROOM-32UE-N16 is a 2.4 GHz wireless MCU module built around the ESP32 SoC. It combines a dual-core processor, integrated Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 (Classic + BLE), along with rich peripherals. The “UE” variant specifically uses a U.FL / IPEX connector for an external antenna, making it ideal for applications that require better RF performance or flexible antenna placement (e.g., enclosed products or long-range communication). The “N16” indicates 16 MB external flash memory, suitable for large firmware, OTA updates, and data-heavy applications. Processing Dual-core Xtensa LX6 32-bit CPU Clock speed up to 240 MHz Memory 16 MB Flash (N16 variant) ~520 KB SRAM + 448 KB ROM Connectivity Wi-Fi: 802.11 b/g/n (up to 150 Mbps) Bluetooth: v4.2 (BR/EDR + BLE) Frequency: 2.4 GHz band Antenna External antenna via U.FL connector Better range and flexibility vs PCB antenna Interfaces / Peripherals GPIO (≈26 usable pins) UART, SPI, I2C, I2S, SDIO ADC, DAC PWM (LED & motor control) Capacitive touch sensing Security Hardware encryption: AES, SHA, RSA Secure boot & flash encryption support Power Operating voltage: 3.0V – 3.6V (typ. 3.3V) Multiple low-power modes for battery applications Environmental Operating temperature: -40°C to +85°C Physical Surface-mount module (~38 pins / 52 pads depending on reference) Compact and RF-shielded design Typical Applications Smart home devices (IoT) Industrial automation Wireless sensors and data loggers Wearables and consumer electronics Remote monitoring systems #Module #ESP32

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Antenna Not Included Surface Mount The ESP32-C3 is a low-power, highly integrated 32-bit microcontroller (MCU) from Espressif Systems that combines 2.4 GHz Wi-Fi and Bluetooth® 5 Low Energy (BLE) connectivity in a single chip. Built around a single-core RISC-V processor running at up to 160 MHz, it is designed for secure, cost-effective IoT and embedded applications. The ESP32-C3 offers excellent wireless performance, low power consumption, robust security features, and a rich set of peripherals, making it ideal for smart home devices, industrial automation, wearable electronics, wireless sensors, and consumer IoT products. Key Features 32-bit RISC-V single-core CPU running up to 160 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 LE Low-power architecture with multiple sleep modes for battery-powered devices Advanced security features including Secure Boot, Flash Encryption, AES, SHA, RSA, HMAC, and hardware random number generator (RNG) Rich peripheral set including GPIO, UART, SPI, I²C, I²S, PWM, ADC, TWAI (CAN), USB Serial/JTAG, and timers Supports external QSPI flash memory and OTA (Over-the-Air) firmware updates Compact package options suitable for space-constrained embedded designs Fully supported by the ESP-IDF, Arduino, and MicroPython development ecosystems #ESP32C3 #Espressif #RISCV #WiFi #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessMCU #LowPower #SmartHome #IndustrialIoT #SecureMCU #EdgeComputing #FirmwareDevelopment

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N8R8 is a high-performance Wi-Fi and Bluetooth Low Energy (BLE) module from Espressif Systems, designed for advanced IoT, edge AI, smart devices, industrial automation, and embedded applications. It is based on the ESP32-S3 SoC featuring a dual-core Xtensa® LX7 processor running up to 240 MHz, integrated wireless connectivity, and enhanced AI acceleration capabilities. The N8R8 variant includes 8 MB Flash memory and 8 MB Octal SPI PSRAM, making it suitable for memory-intensive applications such as machine learning, image processing, graphical user interfaces, and data logging. Key Features Dual-core 32-bit Xtensa LX7 CPU operating up to 240 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 LE (Low Energy) support 8 MB Flash memory 8 MB Octal SPI PSRAM Vector instructions and hardware acceleration for AI/ML workloads Integrated PCB trace antenna USB OTG and USB Serial/JTAG support Rich peripheral set including: GPIO ADC UART SPI I²C I²S PWM USB Operating voltage: 3.0 V to 3.6 V Wireless data rates up to 150 Mbps RF output power up to 20.5 dBm High receiver sensitivity down to –104.5 dBm Surface-mount 41-pin module package Industrial operating temperature range up to -40°C to +85°C (module-dependent specification) #Module #RF-Transceiver #Esp32

WiFi 802.11a/b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace The ESP32-S3-WROOM-1-N8R2 is a compact, low-power Wi-Fi and Bluetooth® Low Energy (BLE) module developed by Espressif Systems. It is based on the ESP32-S3 system-on-chip (SoC), which integrates a dual-core Xtensa® LX7 processor optimized for high performance and edge AI processing. This module includes 8 MB of external SPI flash memory and 2 MB of PSRAM, enabling efficient handling of memory-intensive applications such as graphical interfaces, buffering, and embedded machine learning workloads. Designed for flexibility and scalability, the module integrates RF components, power management, and a wide range of peripherals into a surface-mount package suitable for IoT, industrial, and consumer electronics applications. Key Features Dual-core Xtensa® LX7 processor operating up to 240 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy support Embedded 8 MB SPI flash memory Integrated 2 MB PSRAM AI acceleration through vector instruction support USB OTG (full-speed) capability Multiple low-power operating modes Built-in hardware security features Extensive peripheral interface support Functional Overview The module consists of several integrated subsystems, including a dual-core processing unit, memory subsystem (flash and PSRAM), RF subsystem for wireless communication, peripheral interface controllers, power management circuitry, and a hardware-based security engine. Electrical Characteristics Operating voltage range: 3.0 V to 3.6 V (typical 3.3 V) Operating temperature range: -40°C to +85°C RF operating frequency: 2.4 GHz Current consumption varies depending on operating mode, ranging from microamp levels in deep sleep to hundreds of milliamps during active transmission Processor and Memory The module features a dual-core Xtensa® LX7 CPU capable of running at frequencies up to 240 MHz. It includes approximately 512 KB of internal SRAM, supplemented by 8 MB of external flash memory and 2 MB of PSRAM for extended data storage and processing. Wireless Connectivity The ESP32-S3-WROOM-1-N8R2 supports Wi-Fi communication compliant with 802.11 b/g/n standards in the 2.4 GHz band. It also supports Bluetooth 5 Low Energy for short-range wireless communication. The module includes an integrated PCB antenna and supports RF output power up to approximately +20 dBm. Peripheral Interfaces The module provides a wide range of interfaces, including general-purpose input/output (GPIO) pins, SPI, I2C, UART, and I2S for audio applications. It also supports PWM for LED control, a 12-bit analog-to-digital converter (ADC), and USB OTG functionality. Pin functions are multiplexed to maximize flexibility. Power Management Power efficiency is achieved through multiple operating modes, including active mode, modem sleep, light sleep, and deep sleep. The module includes an RTC subsystem for low-power timekeeping and supports dynamic frequency scaling to optimize performance and energy consumption. Security Features The module incorporates several hardware-based security mechanisms, including secure boot, flash encryption, and digital signature verification. It also includes a hardware random number generator and cryptographic accelerators supporting AES, SHA, RSA, and ECC algorithms. Mechanical Characteristics The module is designed for surface-mount integration and measures approximately 18 mm by 25.5 mm. It includes an onboard PCB antenna and is suitable for compact embedded designs. Pin Configuration Overview GPIO pins are multiplexed to support various peripheral functions such as analog inputs, communication interfaces, and control signals. Dedicated pins are provided for power supply, module enable, and boot configuration. Typical Applications Internet of Things (IoT) devices Smart home systems Industrial automation and monitoring Edge AI and machine learning applications Wearable electronics Audio and multimedia systems USB-enabled embedded devices Compliance The module is designed to meet Wi-Fi and Bluetooth standards and is compliant with RoHS requirements. Certification such as FCC or CE may apply depending on the specific module variant and deployment. Ordering Information The ESP32-S3-WROOM-1-N8R2 variant includes 8 MB of flash memory and 2 MB of PSRAM. #commonpartslibrary #integratedcircuit #transceiver #wireless #rf