ESD Suppressors / TVS Diodes 600W 33V Unidirect Surface Mount SMB (DO-214AA) #CommonPartsLibrary #TVSDiodes

ESD Suppressors / TVS Diodes 600W 22V Unidirect Surface Mount SMB #CommonPartsLibrary #TVSDiodes

ESD Suppressors / TVS Diodes 600W 12V Unidirect Surface Mount SMB #CommonPartsLibrary #TVSDiodes

ESD Suppressors / TVS Diodes 600W 15V Unidirect Surface Mount SMB #CommonPartsLibrary #TVSDiodes

ESD Suppressors / TVS Diodes 600W 18V Unidirect Surface Mount SMB #CommonPartsLibrary #TVSDiodes

DIOM7959X262N https://www.littelfuse.com/~/media/electronics/datasheets/tvs_diodes/littelfuse_tvs_diode_5_0smdj_datasheet.pdf.pdf ESD Suppressors / TVS Diodes 5kW 51V 5% Uni-Directional 2.62 LITTELFUSE 5.0SMDJ51A 576-5.0SMDJ51A https://www.mouser.com/Search/Refine.aspx?Keyword=576-5.0SMDJ51A 5.0SMDJ51A https://www.arrow.com/en/products/5.0smdj51a/littelfuse

SOD2512X110N https://assets.nexperia.com/documents/data-sheet/PESD5V0S1BA.pdf ESD Suppressors / TVS Diodes PESD5V0S1BA/SOD323/SOD2 1.1 771-PESD5V0S1BAF https://www.mouser.co.uk/ProductDetail/Nexperia/PESD5V0S1BAF?qs=45Avz0nZxhtk8Fj2r0tKWQ%3D%3D Nexperia PESD5V0S1BAF

Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green

17V Clamp 5A (8/20µs) Ipp Tvs Diode Surface Mount SOT-23-6 USBLC6-4 low-capacitance ESD/TVS protection diode array, 4 data-line protection, 17V clamping voltage, 5A peak pulse current (8/20µs), 3pF typical capacitance, protects VBUS, USB 2.0 high-speed compatible, IEC 61000-4-2 level 4 ESD protection, SOT-23-6 surface mount package.

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

Ultra-Low Capacitance Quad-Channel ESD Protection Array – Four-channel rail-to-rail transient voltage suppressor (TVS) / ESD protection array designed to protect high-speed data and communication interfaces including USB 2.0, HDMI, DVI, Ethernet, mobile devices, and embedded systems from electrostatic discharge (ESD) and transient overvoltage events. Features ultra-low 1 pF input/output capacitance to preserve signal integrity on high-speed lines, 6 V minimum breakdown voltage, and IEC 61000-4-2 Level 4 ESD protection (±8 kV contact discharge) with very low clamping voltage through an integrated rail-to-rail steering diode architecture. Includes four unidirectional protection channels, low reverse leakage current, and AEC-Q101 qualification for automotive applications. Specified for operation over a −55°C to +150°C ambient temperature range and housed in a compact 6-pin TSOP (SOT-457 / SC-74) surface-mount package. #Nexperia #PRTR5V0U4D125 #PRTR5V0U4D #TVSDiode #ESDProtection #TransientProtection #USBProtection #HDMIProtection #DVISProtection #HighSpeedInterface #AutomotiveElectronics #EmbeddedSystems

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

Automotive 6.6 kW Surface-Mount TVS Diode – Unidirectional transient voltage suppressor (TVS) diode designed for automotive electronics, industrial power supplies, DC power rails, telecom equipment, battery protection, load dump suppression, and embedded circuit protection applications. The Littelfuse SM8S33A features a 33 V reverse standoff voltage (VRWM), 36.7 V minimum breakdown voltage, and 53.3 V maximum clamping voltage at a 132 A peak pulse current (10/1000 µs). Rated for 6.6 kW peak pulse power dissipation, it provides robust protection against ESD, lightning-induced surges, inductive switching transients, and automotive load dump events. Features AEC-Q101 qualification, low leakage current (2 µA typical), fast response time, and high surge capability for demanding environments. Packaged in a SMTO-263 (DO-218AB-compatible) surface-mount package, it operates over a −55°C to +175°C junction temperature range, making it ideal for high-reliability automotive and industrial designs. #Littelfuse #SM8S33A #TVSDiode #TransientVoltageSuppressor #CircuitProtection #ESDProtection #SurgeProtection #LoadDumpProtection #AECQ101 #AutomotiveElectronics #IndustrialElectronics #EmbeddedSystems

6A 48V 26.7V Bidirectional 24V SOT-23 ESD and Surge Protection (TVS/ESD) ROHS The PESD1CAN is a bidirectional TVS (Transient Voltage Suppression) diode designed to protect automotive CAN bus communication lines from damage caused by ESD (electrostatic discharge), surge, and electrical fast transients. It uses silicon avalanche technology in a compact SOT-23 surface-mount package, allowing protection of two CAN signal lines with a single device. The diode is optimized for high-speed and fault-tolerant CAN networks commonly used in automotive and industrial systems. ESD protection up to ±30 kV (IEC 61000-4-2, air/contact) Peak pulse power: 200 W (8/20 µs waveform) Bidirectional protection for CAN_H and CAN_L lines Low clamping voltage for better signal protection Ultra-low leakage current (<1 µA typical) Low junction capacitance (~12–15 pF) for high-speed CAN signals Matched diode capacitance (very low mismatch ~0.1%) for signal integrity Small SOT-23 package (3-pin SMD) Complies with IEC 61000-4-2, -4-4, and -4-5 surge standards #CommonPartsLibrary #Diode

TVS SM24CANB-02HTG SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C2937019 JLCPCB Part Class: Extended Part Manufactured by TECH PUBLIC(台舟) The SM24CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN) lines from damage due to electrostatic discharge (ESD), electrical fast transient (EFT), and other overvoltage transients. The SM24CANB Series can absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard without performance degradation and safely dissipate 10A of 8/20µs surge current (IEC 61000-4-5 2nd Edition) with very low clamping voltages.

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

TVS DIODE 5VWM 9.2VC SOD-123FL The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when compare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry • 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% •Compatible with industrial standard package SOD-123FL • Low profile: maximum height of 1.1mm. • Low inductance, excellent clamping capability • For surface mounted applications to optimize board space • High temperature to reflow soldering guaranteed: 260°C/430sec • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Fast response time: typically less than 1.0ns from 0 Volts to VBR min • Glass passivated junction • Built-in strain relief • Plastic package is flammability rated V-0 per UL 94 • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen-free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) • UL Recognized to UL 497B as an Isolated Loop Circuit Protector. #CommonPartsLibrary #Diode

23.2VC Clamp 25.9A@10/1000us Ipp TVS DIODE SMB(DO-214AA) The SMBJ14A-HF is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from high-voltage transient events such as ESD (electrostatic discharge), lightning-induced surges, and switching spikes. It is part of the SMBJ series, commonly used for general-purpose surge protection in compact surface-mount designs. It is housed in a DO-214AA (SMB) surface-mount package, making it suitable for automated PCB assembly and space-constrained applications. Key Features Working reverse standoff voltage (VRWM): 14 V Breakdown voltage: ~15.6 V to 17.2 V Clamping voltage: ~23.2 V at peak pulse current Peak pulse power: 600 W (10/1000 µs waveform) Peak pulse current: ~25.9 A Unidirectional TVS diode (single channel) Fast response to transient overvoltage events (nanosecond range) Low leakage current (typically ~1 µA) Operating temperature range: −55 °C to +150 °C Surface-mount DO-214AA (SMB) package RoHS compliant, HF (halogen-free) version (“-HF”) #CommonPartsLibrary #Diode

TVS SMBJ12A-HRA SMB_L4.3-W3.6-LS5.4-R-RD LCSC Part Number: C1977456 JLCPCB Part Class: Extended Part Manufactured by Littelfuse(美国力特) Description: SMBJ-HRA Series high-reliability transient voltage suppressor (TVS) diode, surface-mount surge protection device designed to protect sensitive electronic circuits from lightning-induced and other transient overvoltage events. 600W peak pulse power capability (10/1000µs waveform), low clamping voltage, fast response time (<1ps), low leakage current (<1µA above 12V), IEC 61000-4-2 ESD protection, IEC 61000-4-4 EFT protection, operating temperature range -65°C to +150°C, SMB package, suitable for power, data, communication and industrial protection applications. Search Keywords: SMBJ-HRA, SMBJ HRA, High Reliability TVS Diode, SMB TVS Diode, 600W TVS, Transient Voltage Suppressor, Surge Protection Diode, Unidirectional TVS, Bidirectional TVS, IEC61000-4-2 TVS, IEC61000-4-4 TVS, Lightning Protection Diode, SMB Package TVS, High Reliability Protection Diode Hashtags: #SMBJHRA #TVSDiode #TransientVoltageSuppressor #SurgeProtection #SMBPackage #600WTVS #ESDProtection #EFTProtection #LightningProtection #UnidirectionalTVS #BidirectionalTVS #HighReliabilityTVS #CircuitProtection #OvervoltageProtection #SMBJSeries

-40℃~+85℃ 120° 3.2V 527nm 5mA 685mcd 80mW Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHS The BZ-C0603-G3-F1 is a surface-mount (SMD) 0603 chip LED designed to emit emerald green light (~527 nm). It is optimized for low-power indicator applications and backlighting, offering high brightness in a very small package size suitable for modern compact PCB designs. ⭐ Key Features 📦 Package: 0603 (1.6 × 0.8 mm SMT LED) 💡 Color: Emerald Green / Green LED (~527 nm wavelength) 🔆 Luminous intensity: up to ~685 mcd (typical high-brightness grade) ⚡ Forward voltage: ~2.6 V to 3.2 V (typical at 5 mA) 🔌 Forward current: ~5 mA (typical operating current) 📐 Viewing angle: ~120° wide viewing angle 🔥 Power rating: ~80 mW maximum 🌡️ Operating temperature: −40°C to +85°C 🧲 ESD protection: up to ~2000 V (HBM) ♻️ RoHS compliant, suitable for automated SMT assembly #CommonPartsLibrary #LED

3-to-8 line decoder/demultiplexer The 74HC238; 74HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs (E1 and E2 and E3). Every output will be LOW unless E1 and E2 are LOW and E3 is HIGH. This multiple enable function allows easy parallel expansion to a 1-of-32 (5 to 32 lines) decoder with just four '238 ICs and one inverter. The '238 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. • Wide supply voltage range from 2.0 to 6.0 V • CMOS low power dissipation • High noise immunity • Demultiplexing capability • Multiple input enable for easy expansion • Ideal for memory chip select decoding • Active HIGH mutually exclusive outputs • Input levels: • For 74HC238: CMOS level • For 74HCT238: TTL level • Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V) • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • ESD protection: • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V • Multiple package options • Specified from -40 °C to +85 °C and from -40 °C to +125 °C #74HC238N #74HCSeries #CMOSLogic #DecoderIC #Demultiplexer #DigitalLogic #AddressDecoder #ChipSelect #LogicGate #IntegratedCircuit #ElectronicsDesign #EmbeddedSystems