PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 1.75KB (1K x 14) FLASH 18-PDIP The Microchip PIC16F84A-20I/P features 1K × 14 words of Flash program memory, 68 bytes of RAM, and 64 bytes of EEPROM data memory. It operates with a supply voltage range of 2.0 V to 5.5 V and supports an external clock frequency of up to 20 MHz. The device provides 13 bidirectional I/O pins and includes a Timer0 8-bit timer/counter with prescaler, as well as interrupt capability. It uses a 14-bit instruction set architecture and integrates serial programming support. The MCU is supplied in an 18-pin PDIP package and is specified for an industrial temperature range of −40°C to +85°C. #PIC16F84A #Microchip #8bitMCU #EmbeddedController #PICMicrocontroller

3x Frequency Multiplier, output 300 to 450 MHz, 50 Ohm, Mini-Circuits TT1224, 6-SMD #commonpartslibrary #RF #integratedcircuit

5.025GHz Center Frequency Band Pass RF Filter (Radio Frequency) 9.95GHz Bandwidth 2dB 6-SMD, Flat Leads #commonpartslibrary #RF #integratedcircuit

24 MHz ±20ppm Crystal 18pF 60 Ohms 4-SMD, No Lead The ABM8G-24.000MHZ-18-D2Y-T is a compact 24.000 MHz surface-mount quartz crystal from Abracon's ABM8G series, designed to provide a stable and accurate clock reference for digital electronic systems. Housed in a miniature 3.2 × 2.5 mm, 4-pad SMD package, it is optimized for space-constrained applications while delivering reliable frequency performance over a wide operating temperature range. This crystal is commonly used in microcontrollers, wireless modules, communication equipment, networking devices, industrial electronics, and precision timing circuits. It operates in the fundamental mode with an 18 pF load capacitance, making it suitable for a broad range of oscillator circuits. Key Features 24.000 MHz fundamental-mode quartz crystal Compact 3.2 × 2.5 × 1.0 mm 4-pad SMD package 18 pF load capacitance ±20 ppm frequency tolerance ±30 ppm frequency stability Maximum 60 Ω ESR Wide operating temperature range: −40°C to +85°C Glass-sealed ceramic package for high reliability Compatible with standard IR reflow soldering processes Low-profile design suitable for compact PCB layouts Ideal for embedded systems, communications, wireless devices, and clock generation applications. #Abracon #QuartzCrystal #24MHz #ABM8G #SMDCrystal #TimingDevice #ClockSource #EmbeddedSystems #WirelessElectronics #IndustrialElectronics #PCBDesign #ElectronicsComponents

20 Hz ~ 20 kHz Analog Microphone Electret Condenser 3 V ~ 10 V Omnidirectional (-44dB ±2dB) PC Pins JLI 140A HD microphone microphone capsule The CMA-4544PF-W is an electret condenser microphone designed for compact audio capture applications. It features high sensitivity, low noise characteristics, and stable frequency response, making it suitable for voice recording, communication devices, and embedded audio systems. The device integrates a permanently charged electret diaphragm with a built-in FET preamplifier, enabling reliable signal output with minimal external circuitry. Key Features Electret condenser microphone element High sensitivity and signal-to-noise ratio Omnidirectional pickup pattern Compact, low-profile package Built-in FET impedance converter Stable performance over temperature range RoHS compliant Electrical Characteristics Operating Voltage: typically 2.0 V (range: 1.5 V to 10 V) Current Consumption: typically 0.5 mA Sensitivity: typically -44 dB ±3 dB (at 1 kHz, 0 dB = 1 V/Pa) Signal-to-Noise Ratio: typically 60 dB Output Impedance: typically 2.2 kΩ Frequency Response: 20 Hz to 16 kHz Acoustic Characteristics Directivity: Omnidirectional Maximum Sound Pressure Level: typically 110 dB SPL Equivalent Noise Level: typically 34 dB SPL Mechanical Characteristics Package Type: Through-hole cylindrical metal can Dimensions: approximately 4.5 mm diameter × 4.4 mm height Mounting Type: PCB through-hole Terminal Configuration: Two-pin (signal and ground) Environmental Specifications Operating Temperature Range: -20°C to +70°C Storage Temperature Range: -40°C to +85°C Applications Voice recording devices Mobile and handheld electronics Intercom and communication systems Embedded audio input modules IoT and consumer electronics Pin Configuration Pin 1: Output (Vout) Pin 2: Ground (GND / Case) Compliance RoHS compliant Suitable for general consumer electronics use #commonpartslibrary #audio #microphone #analog #condenser

555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-SOIC The TLC555IDR is a low-power CMOS timer device designed as a functional replacement for the standard bipolar 555 timer while providing significantly reduced supply current and improved operating efficiency. The device supports both astable and monostable operating modes and is commonly used for timing generation, pulse shaping, oscillation, PWM generation, delay circuits, and frequency generation applications. The CMOS architecture enables low power consumption, rail-to-rail output capability, and stable timing performance over a wide operating voltage range. The device is suitable for battery-powered systems, portable electronics, industrial controls, instrumentation, consumer products, and embedded electronic designs. The TLC555IDR is supplied in a compact SOIC surface-mount package intended for automated PCB assembly and space-constrained applications. Electrical Characteristics CMOS low-power timer architecture Functional equivalent to standard 555 timer devices Wide operating supply voltage range Low quiescent supply current High input impedance Rail-to-rail output swing capability Stable threshold and trigger levels Compatible with TTL and CMOS logic levels Capable of astable and monostable operation Adjustable duty cycle and frequency operation High output drive capability for direct interfacing Low noise and improved switching performance compared to bipolar 555 timers Functional Features Precision timing generation Oscillator and clock generation Pulse-width modulation support One-shot pulse generation Delay timer implementation Missing pulse detection Frequency divider implementation Sequential timing control LED flashing and tone generation PWM motor and power control applications Package Information Surface-mount SOIC package Standard tape-and-reel packaging format Compact footprint for automated assembly RoHS compliant device construction Environmental and Operating Conditions Industrial operating temperature range ESD protection handling required Suitable for commercial and industrial embedded systems Designed for low-power electronic applications Typical Applications Timer circuits Pulse generators Oscillators PWM controllers LED flashers Alarm and tone generators Frequency generators Power management timing Embedded control systems Portable battery-powered electronics #commonpartslibrary #integratedcircuit #timer #oscillator

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

Wio-E5 Dev Kit embedded with Wio-E5 STM32WLE5JC LoRa module that supports Long Range protocol on the global frequency band. It provides full GPIOs, which support various data protocols and interfaces such as RS485, Grove, male/female headers, etc. This makes it user-friendly because it allows for easy and flexible connections to other devices or components. It would be a perfect choice for fast testing and rapid prototyping of your Long Range IoT projects.

SMPS Transformer – Through-hole switching converter transformer for Power over Ethernet (PoE) DC/DC converters, optimized for the Texas Instruments TPS2373. Features 40 V to 57 V primary voltage, 12 V auxiliary winding, 100 µH inductance (at 10 kHz), and supports 200 kHz to 700 kHz switching frequency. Specified for operation over a −40°C to +125°C temperature range with a planar ER19 construction. #WurthElektronik #750343576 #SMPSTransformer #PoE #PowerOverEthernet #DCDCConverter #PowerTransformer #SwitchingTransformer #TPS2373 #ThroughHole #EmbeddedSystems

ARM Microcontrollers - MCU ARM M4 1024 FLASH 168 Mhz 192kB SRAM 100-LQFP (14x14) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop and Standby modes –VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #CommonPartsLibrary #IntegratedCircuit #Microcontroller #STM32F407

1.5µH Shielded Molded Inductor 9.1A 15.8mOhm Max 1616 (4040 Metric) The XFL4020-152MEC is a metal-composite core, shielded surface-mount power inductor with an inductance value of 1.5 µH and a current rating of 9.1 A. Its low DCR of 15.8 mΩ maximum helps reduce conduction losses, making it suitable for efficient power conversion designs. The component is rated for automotive-grade reliability (AEC-Q200) and operates over a wide temperature range of -40°C to +125°C. Key Features Inductance: 1.5 µH Tolerance: ±20% Maximum Current Rating: 9.1 A Saturation Current (Isat): Approximately 4.6 A Low DC Resistance (DCR): 15.8 mΩ max Shielded molded construction for reduced EMI radiation Metal composite core for high efficiency and compact size Surface-mount package: 1616 / 4040 metric Dimensions: approximately 4.0 mm × 4.0 mm × 2.1 mm Self-resonant frequency: 59 MHz AEC-Q200 qualified for automotive applications Operating temperature: -40°C to +125°C Typical Applications DC/DC switching converters Power supply filtering Voltage regulator modules (VRM) Battery-powered devices Automotive power electronics Embedded power management systems Hashtags #Coilcraft #XFL4020 #PowerInductor #ShieldedInductor #SMTInductor #DC_DCConverter #PowerElectronics #AutomotiveElectronics #AECQ200 #PCBDesign #ElectronicComponents #commonpartslibrary #inductor

Buck-Boost Switching Regulator IC Positive Programmable 0.8V 1 Output 8A 21-PowerVFQFN Synchronous buck-boost DC-DC converter IC that regulates output voltage from a wide input supply range for power management applications. The TPS552892RYQR integrates a four-switch synchronous buck-boost power stage and operates with a 2.7 V to 36 V input voltage range, providing a regulated output voltage across a wide conversion range. It supports programmable output voltage settings and adjustable switching frequency operation, enabling flexible power design optimization. The device includes I²C interface control for configuration and telemetry monitoring. It is designed for high-efficiency step-up and step-down conversion in compact power systems. Key specifications (per datasheet): Input voltage range: 2.7 V to 36 V Topology: Synchronous 4-switch buck-boost converter Control/interface: I²C configurable operation Adjustable switching frequency (as specified in datasheet) #DC-DCConverter #BuckBoost #PowerManagement #TexasInstruments #SynchronousConverter #IC

5x Frequency Multiplier, Output 37.5 to 52.5 MHz, 50 Ohm, Mini-Circuits TT1224 #commonpartslibrary #RF #integratedcircuit

RF IC Frequency Multiplier General Purpose 20MHz ~ 1GHz #commonpartslibrary #RF #integratedcircuit

16 MHz ±15ppm Crystal 8pF 60 Ohms 4-SMD, No Lead The CX3225SB16000D0GZJC1, manufactured by Kyocera AVX, is a 16.000 MHz crystal oscillator element designed to provide precise frequency reference for microcontrollers, communication ICs, and digital systems. It belongs to the CX3225SB series, known for compact size and stable frequency performance. Key Characteristics Type: Quartz crystal (passive frequency component) Frequency: 16 MHz Load Capacitance: 8 pF Frequency Stability: ±15 ppm Frequency Tolerance: ±15 ppm Operating Mode: Fundamental ESR (Equivalent Series Resistance): ~60–80 Ω Mechanical Details Package: 4-SMD, no-lead (surface mount) Size: 3.2 mm × 2.5 mm (3225 package) Height: ~0.6 mm (low profile) Operating Conditions Temperature Range: −25°C to +85°C Mounting Type: Surface mount (SMT) Function (Simple Explanation) This component: Generates a stable clock signal (16 MHz) Acts as the timing reference for MCUs, processors, or RF modules Works together with internal oscillator circuits inside ICs Microcontroller clock sources (e.g., ESP32, STM32, AVR) Communication modules Embedded systems Consumer electronics IoT devices #CommonPartsLibrary #Crystal #Oscillator #resonator