Quad differential PECL receiver 16-SOIC #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #TB5R2

LVDS Single High Speed Differential Driver, 400Mbps, SOT-23-5 #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #DS90LV011

1/1 Transceiver CANbus SOT-23-8 #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #TCAN330

±15kV ESD-Protected 52Mbps, 3V to 5.5V RS-485/RS-422 True Fail-Safe Receivers, SOT23 RS-485 RS-422 True Fail-Safe Receivers 1/4 unit load receiver SOT?23*

12.288 MHz Temperature-Compensated Crystal Oscillator (TCXO) – High-stability HCMOS TCXO designed for wireless communications, GPS/GNSS receivers, audio systems, networking equipment, industrial automation, embedded controllers, and precision timing applications. Part of the ECS-TXO-5032 Series, it provides a 12.288 MHz output frequency with ±2.5 ppm frequency stability over temperature and ±1.5 ppm initial frequency tolerance for highly accurate clock generation. Operates from a 3.3 V supply with 6 mA maximum current consumption and features an HCMOS output, 10 ns maximum rise/fall time, 2 ms typical startup time, and −135 dBc/Hz phase noise at 1 kHz offset. Packaged in a compact 5.0 × 3.2 mm 4-pad SMD package, it is specified for operation over a −30°C to +85°C temperature range, making it ideal for precision embedded and RF timing applications. #ECSInc #ECSTXO50321228TR #TCXO #TemperatureCompensatedCrystalOscillator #12288MHz #HCMOS #PrecisionTiming #GPS #GNSS #WirelessCommunication #IndustrialElectronics #EmbeddedSystems

Analog to Digital Converters - ADC Single-channel, 9-bit, 1.3-GSPS analog-to-digital converter (ADC) with JESD204C interface 144-FCBGA -40 to 85 ADC09xJ1300 is a family of quad, dual and single channel, 9-bit, 1.3GSPS analog-to-digital converters (ADC). Low power consumption, high sampling rate and 9-bit resolution makes the ADC09xJ1300 ideally suited for suited for a variety of multi-channel communications and test systems. Full-power input bandwidth (-3dB) of 6GHz enables direct RF sampling of L-band and S-band. A number of clocking features are included to relax system hardware requirements, such as an internal phase-locked loop (PLL) with integrated voltagecontrolled oscillator (VCO) to generate the sampling clock. Four clock outputs are provided to clock the logic and SerDes of the FPGA or ASIC. A timestamp input and output is provided for pulsed systems. JESD204C serialized interface decreases system size by reducing the amount of printed circuit board (PCB) routing. Interface modes support from 2 to 8 lanes (dual and quad channel devices) or 1 to 4 lanes (for the single channel device), with SerDes baud-rates up to 17.16Gbps, to allow the optimal configuration for each application. Features • ADC Core: – Resolution: 9 Bit – Maximum sampling rate: 1.3GSPS – Non-interleaved architecture – Internal dither reduces high-order harmonics • Performance specifications (–1dBFS): – SNR (100 MHz): 53.5dBFS – ENOB (100 MHz): 8.5 Bits – SFDR (100 MHz): 64dBc – Noise floor (–20dBFS): –143dBFS • Full-scale input voltage: 80 mVPP-DIFF • Full-power input bandwidth: 6GHz • JESD204C Serial data interface: – Support for 2 to 8 (Quad/Dual channel) or 1 to 4 (Single channel) total SerDes lanes – Maximum baud-rate: 17.16Gbps – 64B/66B and 8B/10B encoding modes – Subclass-1 support for deterministic latency – Compatible with JESD204B receivers • Optional internal sampling clock generation – Internal PLL and VCO (7.2–8.2GHz) • SYSREF Windowing eases synchronization • Four clock outputs simplify system clocking – Reference clocks for FPGA or adjacent ADC – Reference clock for SerDes transceivers • Timestamp input and output for pulsed systems • Power consumption (1GSPS): – Quad Channel: 450mW / channel – Dual channel: 625mW / channel – Single channel: 940mW • Power supplies: 1.1V, 1.9V #CommonPartsLibrary #IntegratedCircuit #ADC #HighSpeedADC #RFADC #JESD204C #13GSPS #9bitADC #DirectRFSampling #TexasInstruments #MixedSignal #DataAcquisition #JESD204

1/1 Transceiver - CANbus 8-DFN #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #MCP2557

LIN Transceiver with Voltage Regulator, 3.3V, DIP-14 #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #MCP2050

FLYTO MM238RW 5.8G 4.9G 6.0G Wireless FPV Video Transmission Open-Source Receiver with SPI High Sensitivity The MM238RW is a high-sensitivity analog FPV (First-Person View) video receiver module designed for wireless image transmission systems operating in the 4.9 GHz, 5.8 GHz, and 6.0 GHz bands. It supports SPI control for frequency configuration and integration into custom embedded systems, FPV goggles, ground stations, and video receivers. The module provides low-latency CVBS video output, strong anti-interference performance, and wide compatibility with analog FPV video transmitters. Key Features Wide receiving frequency range: 4900 MHz to 5945 MHz SPI interface for channel and frequency control High receiver sensitivity of up to −90 dBm Low-latency analog CVBS video output FM/PLL demodulation architecture Excellent anti-interference performance 50 Ω RF input impedance Supply voltage: 3.3 V to 5.0 V Typical current consumption: 220 mA Compact module suitable for FPV goggles, monitors, and ground stations Supports custom firmware and open-source development platforms Applications FPV racing drones UAV and aerial photography systems Ground station receivers FPV goggles Wireless analog video monitoring Custom RF video receiver designs Hashtags: #MM238RW #FPV #VideoReceiver #5_8GHz #SPIInterface #DroneElectronics #WirelessVideo #CVBS #RFModule #UAV #FPVGoggles #EmbeddedSystems #AerialPhotography #LowLatency #OpenSourceFPV

32Mbps 3.3V RS485 Quad Line Receivers, SOIC-16 receiver rs485 rs422 differential SOIC*3.9x9.9mm*P1.27mm*

RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SOIC-20 rs232 uart transceiver line-driver SOIC*7.5x12.8mm*P1.27mm*

Buffers, Drivers, Receivers, Transceivers SN74HC368NG4 PDIP-16_L19.3-W6.4-P2.54-LS7.94-BL LCSC Part Number: C21187718 undefined Manufactured by TI(德州仪器)

32Mbps 3.3V RS485 Quad Line Receivers, SO-16 receiver rs485 rs422 differential SOIC*5.3x10.2mm*P1.27mm*

ADQ-22+ is a surface-mount 2-way RF power splitter/combiner from Mini-Circuits designed for broadband signal distribution and combining applications. It operates over a frequency range of 2 MHz to 500 MHz, providing equal power division with low insertion loss, excellent amplitude balance, and phase balance characteristics. The device features a compact SMT package optimized for automated PCB assembly and RF circuit integration. Typical applications include RF signal distribution, communication systems, instrumentation, microwave links, test equipment, receivers, transmitters, antenna systems, and broadband signal processing circuits where low loss and accurate signal splitting or combining are required. Mini-Circuits ADQ-22+ ADQ-22+, ADQ22+, Mini-Circuits ADQ-22+, RF power splitter, RF power combiner, 2-way power splitter, 2-way power divider, RF signal splitter, broadband power divider, RF distribution network, SMT RF splitter, RF combiner, microwave power divider, communication system RF component, 2MHz to 500MHz splitter, RF signal distribution, test equipment RF splitter, antenna signal splitter, Mini-Circuits power divider Hashtags: #ADQ22 #MiniCircuits #PowerSplitter #PowerDivider #PowerCombiner #RF #RFDesign #MicrowaveEngineering #Telecommunications #SignalDistribution #RFComponents #BroadbandRF #AntennaSystems #TestEquipment #WirelessSystems #Electronics #ElectronicComponents #PCBDesign #RFEngineering #SurfaceMountSignal Conditioning PWR SPLTR CMBD / SURF MT/ RoHS

14-Bit 1 GSPS High-Speed Pipeline Analog-to-Digital Converter (ADC) – High-performance ADC designed for software-defined radios (SDR), radar systems, communications equipment, satellite receivers, instrumentation, signal intelligence, wideband data acquisition, and high-speed embedded processing. The Analog Devices AD9690BCPZ-1000 provides 14-bit resolution with a maximum sampling rate of 1 GSPS, using a differential analog input and JESD204B serial digital output for high-speed connection to an FPGA or other high-performance digital processing device. It supports an approximately 2 GHz full-power analog input bandwidth, programmable differential input termination of 50 Ω, 100 Ω, 200 Ω, or 400 Ω, an integrated voltage reference, differential clock input, and flexible JESD204B lane configurations. At 1 GSPS, typical total power consumption is around 2 W. The device also includes two integrated wideband digital processing paths, including NCO and cascaded half-band filtering, which can reduce the amount of data that needs to be processed downstream. The AD9690BCPZ-1000 uses a 64-lead LFCSP package (9 × 9 mm), operates over −40°C to +85°C, and is listed by DigiKey as active. It is particularly well suited for systems where a high-speed ADC needs to interface directly with an FPGA through JESD204B, such as the AMD Kintex UltraScale+ FPGA you provided earlier.

Ultrasonic Receivers, Transmitters GU1209C-40TR SENSOR-TH_GU12XXC-40XX LCSC Part Number: C242180 JLCPCB Part Class: Extended Part Manufactured by INGHAi(赢海)

Ultrasonic Receivers, Transmitters GU1008C-40TR SENSOR-TH_GU10XXC-40TR LCSC Part Number: C242177 JLCPCB Part Class: Extended Part Manufactured by INGHAi(赢海)

Logic-Buffers, Drivers, Receivers, Transceivers CD4049UBDW SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C2871993 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Logic-Buffers, Drivers, Receivers, Transceivers CY74FCT2245ATQCT SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2873003 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Ultrasonic Receivers, Transmitters GU1007C-40T & GU1007C-40R SENSOR-TH_GU10XXC-40TR LCSC Part Number: C242176 JLCPCB Part Class: Extended Part Manufactured by INGHAi(赢海)

Ultrasonic Receivers, Transmitters GU1008C-40T & GU1008C-40R SENSOR-TH_GU10XXC-40TR LCSC Part Number: C242178 JLCPCB Part Class: Extended Part Manufactured by INGHAi(赢海)