Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

2/2 Transceiver Full RS232 16-SOIC #Interface #UART #commonpartslibrary

2/2 Transceiver Full RS232 16-TSSOP #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver #MAX3232

2/2 Transceiver Full RS232 16-SOIC The MAX3232ECWE+T is a dual-channel RS-232 transceiver manufactured by Analog Devices under the Maxim Integrated product family. This integrated circuit is designed to provide reliable bidirectional communication between TTL or CMOS logic-level devices and RS-232 serial communication interfaces. The device integrates charge-pump voltage converters and line drivers/receivers, enabling full RS-232 signal compliance using a single low-voltage power supply. The transceiver supports high-speed serial data communication while maintaining low power consumption and robust signal integrity. It is widely used in embedded systems, industrial automation equipment, communication interfaces, instrumentation systems, microcontroller platforms, portable electronics, and legacy serial communication applications. The MAX3232ECWE+T enables seamless voltage-level translation between modern low-voltage digital electronics and traditional RS-232 communication standards. Its compact surface-mount package and integrated functionality reduce external component requirements and simplify serial interface implementation in space-constrained electronic systems. Engineering Specification Device Type RS-232 transceiver interface IC Communication Standard RS-232 serial communication interface Channel Configuration Dual driver and dual receiver architecture Logic Compatibility TTL and CMOS logic-level interface support Voltage Conversion Integrated charge-pump voltage generation Data Communication Bidirectional asynchronous serial communication support Signal Characteristics Compliant RS-232 voltage-level transmission and reception Power Characteristics Low-voltage single-supply operation Data Rate Performance High-speed serial communication capability Protection Features Robust communication interface tolerance and stable signal operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Applications Embedded systems Industrial automation Serial communication interfaces Microcontroller systems Instrumentation equipment Portable electronics Communication gateways Legacy serial devices Data acquisition systems RS-232 interface conversion Manufacturer Analog Devices / Maxim Integrated #commonpartslibrary #rs232 #serialcommunication #transceiver #interfaceic #maximintegrated #analogdevices #embeddedhardware #communicationinterfaces #surfaceountcomponents #electronicsdesign #industrialelectronics #microcontroller #datacommunication #signalconversion

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41I-AD1B-R2 is a high-accuracy digital humidity and temperature sensor from Sensirion designed for industrial and harsh-environment applications requiring reliable environmental monitoring. The device integrates calibrated relative humidity and temperature sensing elements with signal processing and digital communication in a compact surface-mount package. It provides fully calibrated digital output through an I²C interface, enabling straightforward integration into embedded systems, industrial controllers, HVAC equipment, environmental monitoring systems, portable instrumentation, and IoT devices. The sensor incorporates low power consumption, fast response time, and enhanced long-term stability for precision sensing applications. Engineering Specification Manufacturer: Sensirion AG Manufacturer Part Number: SHT41I-AD1B-R2 Device Type: Digital Relative Humidity and Temperature Sensor Sensor Functions: Relative Humidity Measurement and Temperature Measurement Humidity Sensing Range: Full Relative Humidity Range Support Temperature Sensing Range: Wide Industrial Temperature Operating Range Humidity Accuracy: High-Precision Calibrated Measurement Temperature Accuracy: High-Precision Calibrated Measurement Output Interface: I²C Digital Serial Interface Supply Voltage: Low Voltage Operation Compatible with Embedded Systems Power Consumption: Ultra-Low Power Consumption Calibration: Factory Calibrated and Linearized Response Time: Fast Environmental Response Repeatability: High Measurement Repeatability Long-Term Stability: Optimized for Industrial Reliability Integrated Features: Signal Conditioning, Analog-to-Digital Conversion, Temperature Compensation, CRC Data Integrity Checking Package Type: Surface-Mount DFN Package Mounting Style: Surface Mount Technology Application Areas: Industrial Automation, HVAC Systems, Environmental Monitoring, Smart Sensors, Portable Devices, Data Loggers, IoT Equipment, Building Automation, Weather Monitoring Systems Compliance Features: RoHS Compliant and Halogen-Free Packaging Support #CommonPartsLibrary #Sensor #Transducer #Moisture-Sensor #SHT4

Binary Full Adder with Fast Carry IC 16-PDIP #CommonPartsLibrary #IntegratedCircuit #Logic #SN74283

NAND Gate IC 4 Channel 14-PDIP The SNx4xx00 devices contain four independent, 2-input NAND gates. The devices perform the Boolean function Y = A .B or Y = A + B in positive logic. Features 1• Package Options Include: – Plastic Small-Outline (D, NS, PS) – Shrink Small-Outline (DB) – Ceramic Flat (W) – Ceramic Chip Carriers (FK) – Standard Plastic (N) – Ceramic (J) • Also Available as Dual 2-Input Positive-NAND Gate in Small-Outline (PS) Package • Inputs Are TTL Compliant; VIH = 2 V and VIL = 0.8 V • Inputs Can Accept 3.3-V or 2.5-V Logic Inputs • SN5400, SN54LS00, and SN54S00 are Characterized For Operation Over the Full Military Temperature Range of –55ºC to 125ºC 74LS00 #CommonPartsLibrary #IntegratedCircuit #Logic #Gate #Inverter

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a switch-mode synchronous buck-boost charger with full power-path management. It can automatically regulate power flow between the input source, system load, and battery. It supports a wide input range and is designed for USB Type-C™ / USB Power Delivery (USB-PD) systems, enabling both charging and OTG (power output from battery) operation. ⭐ Key Features ⚡ High-performance charging Up to 5 A charge current Supports 1S to 4S battery packs High efficiency (up to ~96% under typical conditions) Programmable switching frequency: 750 kHz or 1.5 MHz 🔋 Wide input support Input voltage range: 3.6 V to 24 V Absolute max rating up to 30 V Supports USB adapters and barrel jack sources Detects USB charging standards (BC1.2, DCP, CDP, HVDCP, etc.) 🔄 Buck-boost power conversion Seamless buck, boost, and buck-boost operation Maintains stable system voltage even when battery is low or input varies 🔌 USB-PD / OTG support USB Power Delivery (PD 3.0 compatible) Supports OTG output (battery powers USB port) OTG voltage range: 2.8 V to 22 V 🧠 Intelligent power management NVDC power path management (system can run without battery) Dual-input power mux controller (select between two power sources) Battery supplement mode (prevents input overload) 📊 Monitoring & control Integrated 16-bit ADC for voltage, current, temperature monitoring Fully I²C configurable Autonomous or host-controlled operation 🛡️ Protection & safety Input and battery over-voltage/over-current protection Thermal regulation and shutdown Charging safety timer MOSFET protection (internal switching FETs included) 📦 Package 29-pin VQFN (4 mm × 4 mm) package Industrial temperature range: -40°C to 85°C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger

3/5 Transceiver Full, Half RS232, RS422, RS485 40-VQFN (6x6) #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver

2/2 Transceiver Full RS232 16-SOIC #CommonPartsLibrary #IntegratedCircuit #transceiver

Battery Battery Monitor IC Lithium Ion 9-DSBGA The BQ27220YZFR is a highly integrated single-cell battery fuel gauge IC developed for rechargeable lithium-ion and lithium-polymer battery applications. The device utilizes Texas Instruments’ Impedance Track™ algorithm to provide highly accurate battery capacity measurement, state-of-charge estimation, runtime prediction, and battery health monitoring across varying load and temperature conditions. The device is designed for compact portable electronics, wearable devices, IoT products, handheld instruments, and low-power embedded systems requiring precise battery monitoring and extended operating life. The BQ27220YZFR supports system-side fuel gauging without requiring battery pack-side electronics, simplifying battery integration and reducing overall system cost. The fuel gauge continuously monitors battery voltage, current, and temperature to estimate available capacity, remaining runtime, full charge capacity, and state-of-health information. Integrated low-power operation enables ultra-low standby current consumption suitable for always-on battery-powered products. Communication with the host processor is implemented through a standard I²C interface, allowing configuration access, telemetry reporting, and battery parameter monitoring. The device also integrates protection and alert functionality through programmable interrupt outputs and battery condition monitoring features. The BQ27220YZFR is optimized for use with single-cell lithium-based chemistries and supports learning cycles for adaptive battery characterization over product lifetime. Internal data flash memory stores battery profile information and calibration parameters to improve long-term gauging accuracy. The device is supplied in a compact lead-free wafer chip-scale package suitable for space-constrained PCB designs and portable electronics requiring minimal footprint and low-profile assembly. Electrical Characteristics Device Type Single-cell battery fuel gauge and battery monitor IC Battery Chemistry Support Lithium-ion and lithium-polymer rechargeable batteries Input Voltage Range Supports single-cell battery operation Fuel Gauging Method Impedance Track™ algorithm Communication Interface I²C serial interface Measurement Functions Battery voltage monitoring Battery current monitoring Battery temperature monitoring State-of-charge estimation Remaining capacity calculation Full charge capacity estimation State-of-health reporting Runtime prediction Power Consumption Ultra-low operating current for portable applications Temperature Monitoring External thermistor support Host Alert Features Interrupt and alert reporting capability Data Storage Integrated nonvolatile configuration memory Calibration Features Automatic learning and battery characterization support Protection Monitoring Battery condition and system monitoring functions Package Type DSBGA wafer chip-scale package Mounting Style Surface mount Operating Temperature Range Industrial temperature operation suitable for portable electronics Functional Features High-accuracy fuel gauging over battery lifetime Adaptive battery modeling and aging compensation Low-power operation for battery-powered systems Integrated battery profiling capability Real-time remaining runtime estimation Automatic battery learning cycles Compact PCB footprint for portable devices System-side implementation without smart battery pack requirement Programmable battery alert functionality Support for low-power embedded processors and mobile systems Optimized for wearable and IoT applications RoHS compliant and lead-free package construction #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

Diode Array 1 Pair Common Cathode 60 V 10A Through Hole TO-220-3 Full Pack, Isolated Tab #CommonPartsLibrary #Diode #Rectifier #Diode-Array

4/4 Transceiver Full, Half IEEE 802.3, IEEE 1588 56-QFN (8x8) #commonpartslibrary #integratedcircuit #transceiver

1/1 Transceiver Full LINbus 8-SO #CommonPartLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver

16 Bit Digital to Analog Converter 1 10-VSSOP The DAC80501MDGSR is a high-precision, single-channel digital-to-analog converter developed by Texas Instruments for industrial, instrumentation, and embedded control applications requiring accurate voltage output generation. The device integrates a low-drift voltage reference, precision output buffer, and serial peripheral interface communication into a compact low-power solution optimized for high-resolution signal generation. Designed for applications such as programmable power supplies, process control systems, automated test equipment, and sensor calibration, the device delivers excellent linearity, low noise performance, and stable output characteristics across varying environmental conditions. The integrated architecture minimizes external component requirements while maintaining high accuracy and long-term reliability. The converter supports rail-to-rail output operation and offers flexible reference configurations to accommodate different system architectures. Its SPI-compatible digital interface enables straightforward integration with microcontrollers, processors, and FPGA-based systems. Electrical Characteristics The device operates from a single analog supply and supports precision voltage output generation with monotonic performance across the full operating range. Integrated precision reference circuitry provides low temperature drift and stable output characteristics suitable for high-accuracy measurement and control systems. Low glitch energy, low offset error, and low gain error characteristics improve output stability during code transitions. The output amplifier is capable of driving moderate capacitive loads while maintaining signal integrity and settling performance. Interface and Control Communication is implemented through a high-speed SPI-compatible serial interface supporting standard synchronous digital communication protocols. The interface allows direct programming of DAC output codes and internal configuration registers. The device supports daisy-chain capable serial communication architecture for simplified expansion in multi-device systems. Internal registers provide control of reference operation, power management, and output configuration functions. Power Management The DAC80501MDGSR incorporates low-power operating modes intended for energy-sensitive applications. Integrated power-down functionality reduces current consumption during inactive system states while preserving configuration integrity. Internal circuitry is optimized for low quiescent current operation without compromising output precision or dynamic response performance. Package Information The device is supplied in a compact VSSOP surface-mount package suitable for space-constrained industrial and embedded designs. The package configuration supports automated assembly processes and standard PCB manufacturing techniques. Typical Applications Typical applications include industrial automation, programmable voltage sources, data acquisition systems, sensor simulation, instrumentation equipment, motor control systems, and precision calibration platforms. The device is particularly suitable for systems requiring stable and repeatable analog voltage generation with minimal external circuitry. #commonpartslibrary #integratedcircuit #analog #digital #converter

2/2 Transceiver Full RS232 16-PDIP #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver #MAX3232

2/2 Transceiver Full RS232 16-PDIP #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver #MAX232

1/1 Transceiver Full Ethernet 32-SQFN (5x5) #CommonPartsLibrary #IntegratedCircuit #Interface #Drivers #Receivers #Transceivers #LAN8740

Enclosed AC DC Converters 2 Output 15V 340mA, 340mA 80 ~ 305 VAC Input The RAC10-K/277 series are highly efficient PCB-Mount power conversion modules with ultra-low energy losses even in light load conditions. Built for worldwide usage, the AC/DC units cover an enhanced mains input range of 85VAC up to 305VAC and come with international safety certifications for both industrial and household standards. These AC/DC modules offer fully protected single or dual outputs as well as EMC Class B compliance without the need of any external components. The 140% peak power capability makes the RAC10-K/277 series suitable for inductive, high start-up current or nonlinear loads. With a full load temperature range of -40°C to +65°C, they are ideal for always on and standby mode operations in process automation, IoT and smart building applications. Input voltage: 85 VAC to 305 VAC (wide-range, including 277 VAC industrial lines) Output: Dual output (±15 V DC) Power rating: 10 Watts Isolation: Fully isolated AC to DC conversion Encapsulation: Fully sealed/potted module for safety and reliability #CommonPartsLibrary #power-supply #RAC10-15

EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory

Comparator Standard (General Purpose) Open-Drain, Rail-to-Rail 14-TSSOP The TLV902x have an open-drain output that can be pulled-up below or beyond the supply voltage. These devices are designed for low voltage logic translators. The TLV903x have a push-pull output stage capable of sinking and sourcing many milliamps of current to drive LEDs or capacitive loads for MOSFET gates. The TLV90x0 and TLV90x1 are alternate pinouts of the single device. The family is specified for the Industrial temperature range of -40°C to +125°C and are available in a standard leaded and leadless packages. • Supply range: 1.65V to 5.5V • Precision input offset voltage: 300μV • Rail-to-Rail input with fault-tolerance • Typical propagation delay: 100ns • Low quiescent current per channel: 16μA • Low input bias current: 5pA • Open-drain output option (TLV902x) • Push-pull output option (TLV903x) • Full temperature range: -40°C to +125°C • ESD protection: 2kV • Alternate Single Pinout (TLV90x0) #CommonPartsLibrary #IntegratedCircuit #Comparator

Battery Multi-Function Controller IC Lithium Ion/Polymer 32-VFQFPN (5x5) L9961 is part of a complete battery pack monitoring, balancing, and protecting system for Li-Ion and Li-Polymer cells in 3, 4 or 5 series configurations. The L9961 uses a high precision ADC to provide cell voltage, stack voltage and temperature conversion via external NTC. Voltage monitoring functions are cyclically performed with a programmable loop time. Stack current is also monitored via a high accuracy CSA, continuously running and performing also Coulomb counting. Cell balancing is available and can be simultaneously activated on all cells. IC configuration and information exchange for SOC/SOH estimation are performed via I2C peripheral. The IC also integrates a dual pre-driver programmable in both HS/LS configurations for driving pack relays. L9961 also implements battery pack fuse protection to prevent fire and explosion hazards. A 3.3 V regulator with a high current capability is available for supplying pack controller and other external circuitry in both standby and normal operation modes. The IC protects the battery pack against over/under voltage conditions and monitors for over/ under temperature. It also features protection against overcurrent (both directions) and short-circuit in discharge events. Safety-relevant configurations can be stored in the internal NVM to avoid re-programming the device at each wake-up. Features • 2 μA shipment - DEEP SLEEP mode current and 5 μA standby consumption (with VREG LDO active) standby consumption (with VREG LDO active) • Integrated 3.3 V VREG LDO for supplying MCU and LEDs • Measures cell voltage (3 to 5 cells), with over/undervoltage detection and balance undervoltage protection • 12-bit voltage measurement with maximum error of ±15 mV in the [1.5 – 4.5] V range, for -40 °C < TJ < 105 °C • Measures stack voltage, with over/under voltage detection and plausibility check vs. sum of cells • Measures pack temperature via NTC, with over/undertemperature detection • Ratiometric temperature measurement with ±0.8% max. gain error in the [0.2 – VREG] V range, for -40 °C < TJ < 105 °C • Measures battery current, with Coulomb counting, overcurrent (both directions) and short-circuit in discharge protection. • 16-bit signed current measurement with 0.1% full scale error at room temperature • I 2C peripheral for device programming and data transfers over I2C bus • Cell balancing supporting up to 70 mA per cell • Dual configurable HS/LS predriver for pack relay management • Pack fuse management • Embedded NVM for configuration parameters storage • High hotplug robustness Applications • Cordless power tools • Backup energy storage systems and UPS • Light electric vehicles (e-bikes, scooters, etc.) • Portable and semi-portable equipment • Medical equipment #L9961TR #BatteryManagement #BMS #LiIonBattery #LiPoBattery #STMicroelectronics #BatteryProtection #CellBalancing #CoulombCounting #PowerManagement #EmbeddedSystems #EnergyStorage #EBike #PowerTools #ElectronicsDesign

16 Bit Digital to Analog Converter 1 40-VQFN (6x6) The DAC81416RHAT is a precision, low-power, multi-channel digital-to-analog converter designed for high-accuracy industrial and instrumentation applications. It integrates sixteen independently programmable voltage-output DAC channels with internal precision reference support, output buffering, and flexible serial communication capability. The device is optimized for systems requiring deterministic analog signal generation, high linearity, low drift, and stable long-term performance. Typical applications include automated test equipment, process control, programmable logic controllers, data acquisition systems, and closed-loop control platforms. The device supports high-resolution output generation with monotonic behavior and excellent channel-to-channel matching. Integrated diagnostic and protection features improve system reliability in harsh operating environments. The architecture is intended for dense analog output designs where low power consumption, compact footprint, and precision accuracy are critical. Engineering Specification Manufacturer: Texas Instruments Device Type: Multi-Channel Precision Voltage Output Digital-to-Analog Converter Package Type: VQFN Mounting Type: Surface Mount Channel Configuration: Sixteen independent DAC output channels DAC Resolution: High-resolution precision architecture suitable for industrial control and instrumentation systems Output Type: Buffered voltage output Interface Type: SPI-compatible serial interface Reference Support: Internal reference with external reference capability Power Supply Operation: Single-supply analog and digital operation Output Characteristics: Rail-to-rail capable buffered analog outputs with low glitch energy and fast settling behavior Linearity Performance: High integral and differential linearity with monotonic output behavior across full operating range Noise Performance: Low output noise and low temperature drift for precision signal generation Update Capability: Simultaneous and asynchronous channel update support Calibration Features: Integrated gain and offset correction support Diagnostic Features: Communication integrity monitoring and fault detection capability Industrial Features: Designed for precision automation, process control, programmable instrumentation, and multi-channel analog control systems Temperature Range: Industrial operating temperature range Protection Features: Robust serial interface handling and stable output drive architecture for industrial environments Applications: Industrial automation, programmable power control, automated test equipment, data acquisition systems, instrumentation, and closed-loop analog control platforms #commonpartslibrary #integratedcircuit #analog #digital #converter

4/4 Transceiver Full MII, RMII 32-VQFN (5x5) ## Engineering Specification ## General Description The **LAN8770M-I/PRA** is a Microchip Technology single-port **100BASE-T1 Ethernet physical layer transceiver** designed for automotive, industrial, and embedded networking applications. It provides Ethernet communication over a single balanced twisted pair and is suitable for compact systems requiring reliable network connectivity, low-power operation, and standard MAC interface support. The device is commonly used in automotive electronic control units, infotainment systems, telematics modules, sensor nodes, industrial control systems, and embedded Ethernet hardware. ## Device Identification Manufacturer Part Number: **LAN8770M-I/PRA** Manufacturer: **Microchip Technology** Product Family: **LAN8770** Device Category: **Integrated Circuit** Device Type: **Ethernet PHY Transceiver** Ethernet Standard: **100BASE-T1** Interface Type: **MII and RMII** Mounting Type: **Surface Mount** Package Type: **VQFN** ## Functional Description The device functions as an Ethernet physical layer transceiver that connects a host controller or microcontroller MAC interface to a single-pair Ethernet physical medium. It handles the analog and digital PHY functions required for 100BASE-T1 communication, allowing embedded systems to transmit and receive Ethernet data over a single twisted pair cable. ## Network and Interface Description The **LAN8770M-I/PRA** supports 100 Mb/s single-pair Ethernet communication and provides MII and RMII host interface options. This allows integration with microcontrollers, processors, gateways, and network controllers that support standard Ethernet MAC interfaces. The device is intended for applications where compact Ethernet connectivity and reduced cabling complexity are required. ## Electrical Description The device is designed for low-voltage operation and supports multiple supply domains according to the manufacturer’s recommended operating conditions. Proper power sequencing, decoupling, reset handling, clocking, and reference layout should be implemented to maintain stable PHY operation and signal integrity. ## Package and Mechanical Description The component is supplied in a compact surface-mount **VQFN package**, suitable for dense printed circuit board assemblies. The package supports automated assembly and is appropriate for space-constrained automotive and industrial electronic designs. ## Control and Diagnostic Description The PHY supports management and configuration through standard control interfaces used in Ethernet designs. It provides status monitoring and configuration capability for link management, operating mode selection, and system-level diagnostics. These features allow the host controller to configure and monitor Ethernet link behavior during operation. ## Automotive and Industrial Suitability The **LAN8770M-I/PRA** is suitable for embedded systems requiring robust single-pair Ethernet communication. It is applicable to automotive networking, telematics, infotainment, advanced driver assistance systems, industrial Ethernet nodes, building automation, control modules, and other connected embedded platforms. ## Mounting and Assembly Description The component is intended for surface-mount PCB assembly using standard reflow soldering processes. PCB layout should follow Microchip’s hardware design guidance, including proper power supply decoupling, controlled impedance routing, short signal paths, grounding, and separation of sensitive analog and digital sections where applicable. ## Design Considerations The design should account for Ethernet signal integrity, single-pair cable interface requirements, common-mode noise control, EMC performance, supply filtering, oscillator or clock source requirements, reset timing, thermal performance, and package solderability. The device should not be operated beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Application Suitability The device is suitable for automotive Ethernet nodes, electronic control units, telematics modules, infotainment systems, sensor interfaces, industrial controllers, embedded gateways, connected equipment, and compact network-enabled hardware requiring 100BASE-T1 Ethernet PHY functionality. ## Hashtags #commonpartslibrary #integratedcircuit #ethernetphy #microchip #microchiptechnology #lan8770 #lan8770mipra #singlepairethernet #100baset1 #automotiveethernet #ethernettransceiver #phytransceiver #embeddednetworking #mii #rmii #vqfnpackage #smdcomponent #surfacemount #automotiveelectronics #industrialethernet #telematics #infotainment #embeddedhardware #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering