3.3mH @ 10 kHz 2 Line Common Mode Choke Through Hole 2.5A DCR 60mOhm #CommonPartsLibrary #Filter #Inductor #THT

2 Line Common Mode Choke Surface Mount 300 Ohms @ 100 MHz 400mA DCR 350mOhm #commonpartslibrary #filter #cmc

2 Line Common Mode Choke Surface Mount 100mA DCR 3Ohm (Typ) , -55C ~ 125C The ECMF2-40A100N6 and ECMF4-40A100N10 are highly integrated common mode filters designed to suppress EMI/RFI common mode noise on high speed differential serial buses like HDMI 2.1, HDMI 2.0, HDMI1.4, USB4, USB 3.2 Gen 2, USB 2.0, ethernet, MIPI, Display Port and other high speed serial interfaces. They have a very large differential bandwidth to comply with these standards and can also protect and filter one or two differential lanes. 10.7 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB4, USB 3.2 Gen2, USB 2.0, MIPI, Display port 2.0, etc. • High common mode attenuation on WLAN frequencies: – -15 dB at 2.4 GHz – -21 dB at 5.0 GHz – -17 dB at 6.0 GHz • Low serial resistance: 3.0 Ω • Very low PCB space consumption • Thin package: 0.5 mm max. • High reduction of parasitic elements through integration • Lead free and RoHS package • Exceeds IEC 61000-4-2 level 4 standard: – Contact discharge: ◦ ±9 kV (contact discharge, ECMF2-40A100N6) ◦ ±10 kV (contact discharge, ECMF4-40A100N10) – Air discharge: ◦ ±20 kV (air discharge, ECMF2-40A100N6) ◦ ±25 kV (air discharge, ECMF4-40A100N10)

700 µH @ 10 kHz 2 Line Common Mode Choke Through Hole 21.5A DCR 3.8mOhm #CommonPartsLibrary #Filter #WE-CMB HV

10 mH @ 1 kHz 2 Line Common Mode Choke Through Hole 350mA DCR 2.2Ohm #Filter #7300

2 Line Common Mode Choke Surface Mount 6 kOhms 90mA DCR 5.5Ohm #CommonPartsLibrary #Filter #WE-CNSW

51 µH @ 100 kHz 2 Line Common Mode Choke Surface Mount 2 kOhms @ 10 MHz 200mA DCR 3.5Ohm #commonpartslibrary #filter #cmc

156 µH @ 100 kHz 2 Line Common Mode Choke Through Hole DCR 15mOhm #Filter

2 Line Common Mode Choke Surface Mount 20A DCR 4.1mOhm #CommonPartsLibrary #Filter

2 Line Common Mode Choke Surface Mount 5A DCR 6.75mOhm #CommonPartsLibrary #Filter

51 µH @ 100 kHz 2 Line Common Mode Choke Surface Mount 2.8 kOhms @ 10 MHz 200mA DCR 1Ohm Common Mode Choke Coil for suppressing common-mode noise on high-speed differential signal lines in automotive and general electronic applications. The ACT45B-510-2P-TL003 provides 51 Ω common-mode impedance at 100 MHz, supports up to 0.5 A rated current, and features a 4.5 × 3.2 × 2.8 mm surface-mount package with a wide operating temperature range of -40°C to +125°C. #CommonModeChoke #EMIFilter #NoiseSuppression #SignalLineFilter #DifferentialSignal #51Ohm #0_5A #SMD #TDK #AutomotiveElectronics

20 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 1.5A DCR 270mOhm

2 Line Common Mode Choke Surface Mount 90 Ohms @ 100 MHz 400mA DCR 190mOhm The ACM2012-900-2P-T002, manufactured by TDK, is a 2-line common mode filter that helps reduce electromagnetic interference (EMI) and radio-frequency interference (RFI) in electronic systems. It is built using a wire-wound chip structure and optimized for high-speed differential signals while maintaining low impact on the desired signal. Key Characteristics Component Type: Common Mode Choke / EMI Filter Lines: 2-line (for differential signal pairs) Impedance: 90 Ω @ 100 MHz Current Rating: up to 400 mA DC Resistance: ~190 mΩ max Voltage Rating: up to 50 V Package Size: 0805 (2.0 × 1.2 mm) Mounting: Surface Mount (SMD) Function Suppresses common-mode noise on signal lines Maintains low differential impedance, so signal integrity is preserved Helps systems pass EMI/EMC compliance In simple terms: It filters out noise without affecting the actual data signal. Typical Applications USB, HDMI, Ethernet lines High-speed communication interfaces Embedded systems and IoT devices Consumer electronics and industrial equipment LVDS and display interfaces #CommonPartsLibrary #Filter #ACM

39 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 300mA DCR

2 Line Common Mode Choke Surface Mount 2.2 kOhms @ 100 MHz 200mA DCR 1.2Ohm SDCW3216-2-222TF FILTER-SMD_4P-L3.2-W1.6-TL LCSC Part Number: C370252 JLCPCB Part Class: Extended Part Manufactured by Sunlord(顺络)

2 Line Common Mode Choke Surface Mount 90Ohms @ 100MHz 150mA DCR 1.88Ohm #commonpartslibrary #filter #commonmodechoke

2 Line Common Mode Choke Through Hole 1.6A DCR 185mOhm (Typ) #commonpartslibrary #cmc #filter

Common Mode Chokes / Filters PCAQ9070MW-222 FILTER-SMD_4P-L9.0-W7.0-TL LCSC Part Number: C2916882 JLCPCB Part Class: Extended Part Manufactured by PROD(谱罗德)