Zero Cross Opto-Triac, Vdrm 800V, Ift 10mA, DIP-6 #Relay #SolidState #commonpartslibrary

Zero Cross Opto-Triac, Vdrm 600V, Ift 10mA, IT 900mA, SOIC-7 #Relay #SolidState #commonpartslibrary

Zero Cross Opto-Triac, Vdrm 600V, Ift 10mA, dv/dt 1000, DIP6 #Relay #SolidState #commonpartslibrary

Zero Cross Opto-Triac, Vdrm 600V, Ift 10mA, IT 900mA, DIP-7 #Relay #SolidState #commonpartslibrary

Zero Cross Opto-Triac, Vdrm 600V, Ift 10mA, IT 1.2A, DIP-7

Zero Cross Opto-Triac, Vdrm 250V, Ift 5mA, DIP6

The NCP4304A and NCP4304B, manufactured by ON Semiconductor, are advanced controllers and drivers designed to optimize synchronous rectification in high-efficiency switch mode power supplies (SMPS). These versatile components are suitable for various topologies, including flyback, forward, and half-bridge resonant LLC converters. Featuring an externally adjustable minimum on and off times, the NCP4304A/B effectively mitigates ringing caused by PCB layout and parasitic elements, ensuring reliable and noise-free operation. The components boast an extremely low turn-off delay time of typically 40 ns, high sink current capability, and an automatic package parasitic inductance compensation system, which together maximize the conduction time of the synchronous rectification MOSFET, thereby enhancing SMPS efficiency. The NCP4304A offers a gate drive clamp of 12 V, while the NCP4304B provides a 6 V clamp, facilitating implementation in 24 V output applications. Key features include precise secondary zero current detection with an adjustable threshold, a maximum operating frequency of 500 kHz, and a low startup and standby current consumption. The devices are available in SOIC-8 and DFN8 packages, making them suitable for high power density AC/DC power supplies, notebook adapters, gaming consoles, and other applications demanding high efficiency.

Zero Cross Opto-Triac, Vdrm 600V, Ift 10mA, IT 300mA, DIP-7 Opto-Triac Opto Triac Zero Cross Solid State Relays DIP*N7*W7.62mm*

4 Position FPC Connector Contacts, Top and Bottom 0.020" (0.50mm) Surface Mount, Right Angle FFC/FPC connector for terminating flexible flat cables to a printed circuit board in wire-to-board applications. This 4-position, 0.5 mm pitch, right-angle surface-mount receptacle features a zero insertion force (ZIF) back flip-lock actuator with dual-side contact mating, supports up to 50 VAC/VDC and 0.5 A per contact, and operates over a temperature range of -40°C to +85°C. #TEConnectivity #AMPConnectors #FFC #FPC #FFCConnector #FPCConnector #ZIF #BackFlipLock #RightAngle #SurfaceMount #SMT #WireToBoard #0p5mmPitch #4Position #PCB #ElectronicComponents #Connector

FFC/FPC Connector – 30-position right-angle FFC/FPC connector with 1.00 mm pitch for board-to-cable interconnection. Features bottom contacts, Zero Insertion Force (ZIF) slider actuator, surface-mount solder termination, 0.5 A current rating per contact, 50 V voltage rating, and 3.00 mm mated height. Includes gold-plated phosphor bronze contacts, tin-plated solder tails, nylon housing, solder retention, and supports up to 30 mating cycles. Specified for operation over a −40°C to +85°C temperature range with a UL94 V-0 flammability-rated housing. #Molex #0522713069 #EasyOn #FFCConnector #FPCConnector #ZIFConnector #30Position #1_0mmPitch #BottomContact #SurfaceMount #BoardToCable #EmbeddedSystems

Isolated Module DC DC Converter 1 Output 12V 13.4A 9V - 50V Input DCM3623T50T13A6T70 is a high-density, isolated, and regulated DC-DC converter module from Vicor, designed to efficiently convert a wide input voltage range into a stable 12V output. Utilizing Vicor's advanced ChiP™ packaging technology and Zero Voltage Switching (ZVS) topology, it delivers high efficiency, excellent thermal performance, and robust protection features, making it suitable for industrial, transportation, aerospace, and distributed power applications. Key Features Wide input voltage range: 9V to 50V DC Regulated 12V DC output Maximum output power: 160W Continuous output current up to 13.4A High efficiency up to 91.5% 2250V DC isolation between input and output High-frequency Zero Voltage Switching (ZVS) topology Integrated protections: Over-Voltage Protection (OVP) Over-Current Protection (OCP) Under-Voltage Lockout (UVLO) Short-Circuit Protection (SCP) Over-Temperature Protection (OTP) Compact 3623 Through-Hole ChiP® package Operating temperature range: -40°C to +125°C Suitable for industrial, process control, transportation, defense, and aerospace systems. #DCDCConverter #Vicor #PowerModule #IsolatedConverter #PowerElectronics #IndustrialAutomation #EmbeddedSystems #TransportationElectronics #AerospaceElectronics #HighEfficiencyPower #ChiPTechnology #DCM3623

TM1814 is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products. This product has excellent performance and reliable quality. Features  Adopt power CMOS technology  Withstand voltage of OUT output port is 32V  5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor  Constant current can achieve level 64 adjustment (6.5 mA-38mA)  PWM brightness controls circuit, and 256 brightness is adjustable  Accurate current output value Maximum error (between channels): ±3% Maximum error (between chips): ±5%  Single line serial concatenated port  Oscillation mode: build in RC vibration and conduct clock synchronization according to signals on data line. After receiving the data from this unit, it can reproduce follow-up data and send it to lower level through data output end, and signals will not be distorted and reduced along with cascade  Build in power on reset circuit, and after powering on reset, all registers are initialized to zero  External control mode data transmission rate is 800 KHZ  Internal control mode data transmission rate is 500 KHZ  Internal control mode chip sends 2048 points of data  Encapsulation mode: SOP8 #CommonPartsLibrary #IntegratedCircuit

Solid State Relay, 34 Series, Ultra-Slim, SPST-NO, 2 A, 36 VDC, PCB, Through Hole, Zero Crossing

Zero Cross Opto-Triac, Vdrm 400V, Ift 5mA, SOP6 #Relay #SolidState #commonpartslibrary

Zero Cross Opto-Triac, Vdrm 400V, Ift 8mA, IT 8A #Relay #SolidState #commonpartslibrary

80V Zero Drift, Bidirectional, Current Shunt Monitor, 20V/V gain, bandwidth 450kHz, Vcc=5V, MSOP-8 highside HS current sense amplifier linear buffered MSOP*3x3mm*P0.65mm*

80V Zero Drift, Unidirectional, Current Shunt Monitor, 60V/V gain, bandwidth 500kHz, Vcc=4V~80V, MSOP-8 highside HS current sense amplifier linear buffered monitor MSOP*3x3mm*P0.65mm*

Zero Cross Opto-Triac, Vdrm 400V, Ift 5mA, SOP6 Opto-Triac Opto Triac Zero Cross MFSOP6*4.4x3.6mm*P1.27mm*

At the heart of Raspberry Pi Zero 2 W is RP3A0, a custom-built system-in-package designed by Raspberry Pi in the UK.

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement