Battery Power Management IC Lithium Ion/Polymer 24-QFN (4x4) nPM1100 is an integrated Power Management IC (PMIC) with a linear-mode lithium-ion/lithium-polymer battery charger in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient, dual-mode configurable output DC/DC buck regulator. nPM1100 is an extremely compact PMIC device, created for space constrained applications with a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs and supports charging batteries at up to 500 mA through USB, and also delivers up to 150 mA of current to power external components with regulated voltage. A minimum of five passive components are required for operation and the device functions without a control interface. It is the perfect companion for nRF52 and nRF53 multiprotocol SoCs in battery powered designs. Low quiescent current (IQ) extends battery life during shipping and storage with Ship mode, or in operation using auto-controlled hysteretic buck mode for high efficiency down to 1 µA loads. Charge and error indication LED drivers are built in. Charge profile limits are configurable and VBUS current limits can be fixed or auto-controlled with on-chip USB port detection. • 400 mA linear battery charger • Linear charger for lithium-ion/lithium-polymer batteries • Adjustable charge current from 20 mA to 400 mA • Selectable termination voltage of 4.1 V or 4.2 V • Automatic trickle, constant current, and constant voltage charging • Battery thermal protection • Discharge current limitation • JEITA compliant • Li-ion/Li-polymer USB battery charger with a high efficiency buck regulator • 800 nA - Typical quiescent current • 460 nA - Shipping mode quiescent current • Thermal protection • Input regulator • USB compatible current limit of 100 mA and 500 mA • 4.1 V to 6.7 V input voltage range for normal operation • 20 V overvoltage protection • Reverse current protection • 3.0 V to 5.5 V system voltage output • USB port detection supporting the following types: • SDP • CDP/DCP • 1.8 V to 3.0 V, 150 mA step-down buck regulator • Step-down buck regulator with up to 92% efficiency • Automatic transition between hysteretic and pulse width modulation (PWM) modes • Forced PWM mode for clean power operation • Pin-selectable output voltage (1.8 V, 2.1 V, 2.7 V, 3.0 V) • Soft start-up • LED drivers for charger state indication • 5 mA low side LED driver for charging indication • 5 mA low side LED driver for error indication • 2.3 V to 4.35 V battery operating input range • 2.1x2.1 mm WLCSP package • Suitable for two layer PCB design #CommonPartsLibrary #IntegratedCircuit #NordicSemiconductor #nPM1100 #PMIC #BatteryCharger #PowerManagement #LiIon #LiPolymer #BuckConverter #Wearables #IoT #WirelessSensor #LowPowerDesign #USBCharging #EmbeddedSystems #nRF52 #nRF53 #PortableElectronics

Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24 Battery Charger Li-Ion Li-Poly Texas*RGY*R*PVQFN*N*

1S Cell Li-ion or Li-polymer Switching Charger Compatible with Wide Input Range andIntegrated Programmable OTG #ultralibrarian

2- Cell Li-ion or Li-polymer Switching Charger Compatible with 5V Input and Integrated Bidirectional Charge/Discharge #ultralibrarian

High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and standard temperature sensing, Texas R-RGE0024H Battery Charger Li-Ion Li-Poly Texas*RGE0024H*

2-Cell Li-Ion or Li-Polymer Switching Charger Compatible with 5V Input and Integrated Bidirectional Charge/Discharge with Cell Balance #ultralibrarian

Stand-Alone Linear Li-Ion / Li-Polymer Charge Management Controller, MSOP-10 lithium-ion battery charger MSOP*3x3mm*P0.5mm*

Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries protection Li-Ion Li-Pol WSON*1.5x1.5mm*P0.5mm*

2- Cell Li-ion or Li-polymer Switching Charger Compatible with 5V Input and Integrated Bidirectional Charge/Discharge #ultralibrarian

Battery Battery Protection IC Lithium Ion/Polymer SOT-23-6 S-8261ABJMD-G3JT2G is a high-accuracy lithium-ion/lithium-polymer battery protection IC designed for single-cell battery packs. It integrates voltage detection and timing circuits to protect rechargeable batteries against overcharge, overdischarge, overcurrent, and short-circuit conditions, helping improve battery safety, reliability, and lifespan. The device is commonly used in portable electronics, battery packs, IoT devices, and handheld equipment. It is housed in a compact SOT-23-6 package suitable for space-constrained designs. Key Features Single-cell Li-ion / Li-polymer battery protection IC High-accuracy overcharge detection High-accuracy overdischarge detection Overcurrent and short-circuit protection Built-in delay circuits to prevent false triggering Low current consumption (typical operating current in the µA range) Wide operating voltage range Support for 0 V battery charging function Compact SOT-23-6 package RoHS compliant and lead-free version available Typical Applications Li-ion battery packs Li-polymer battery packs Portable consumer electronics Wireless sensors and IoT devices Handheld instruments Rechargeable battery-powered equipment #BatteryProtectionIC #LiIonBattery #LiPoBattery #PowerManagement #BatteryPackProtection #OverchargeProtection #OverdischargeProtection #ShortCircuitProtection #SOT23 #ABLIC #SeikoInstruments #PortableElectronics #RechargeableBattery #PMIC #SingleCellBattery

High-side protector for single-cell Li-ion and Li-polymer batteries with 0-V charge disabled 8-X2QFN (1.5x1.5) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #BatteryManagement #BQ2982

1-cell, 0.8-A Li-ion and Li-polymer battery charger #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger #BQ21040

Bite-sized Lipoly/Lilon chargers #Sublayout #BatteryCharger

1S Cell Li-ion or Li-polymer Switching Charger Compatible with Wide Input Range andIntegrated Programmable OTG #ultralibrarian

2- Cell Li-ion or Li-polymer Switching Charger Compatible with 5V Input and Integrated Bidirectional Charge/Discharge #ultralibrarian

2-Cell Li-Ion or Li-Polymer Switching Charger Compatible with 5V Input and Integrated Bidirectional Charge/Discharge with Cell Balance #ultralibrarian

3D model for Li-Polymer battery AHB572535 Volts: 3.7V, Capacity: 500mAh / 1.85Wh. Commodity specification: 37.30 x 24.80 x 6.00mm, Weight: 36g.

Multichemistry Impedance Track™ stand-alone fuel gauge Battery Fuel Gauge IC for accurate state-of-charge, state-of-health, and runtime prediction of rechargeable battery packs using Texas Instruments' Impedance Track™ algorithm. It supports 1- to 16-series Li-Ion/Li-Polymer, as well as NiMH and lead-acid batteries, communicates via an I²C interface, measures pack voltage up to 65 V, and integrates coulomb counting, temperature sensing, and programmable battery management functions. #BatteryFuelGauge #FuelGaugeIC #BatteryManagement #ImpedanceTrack #CoulombCounter #I2C #LiIon #LiPolymer #NiMH #LeadAcid #TexasInstruments #BQ34Z100R2

I²C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management Battery charger IC for single-cell Li-Ion and Li-Polymer batteries with an input voltage range of 3.9V to 13.5V. Supports up to 3A programmable charge current, 5A boost output, and integrates power-path management, input current/voltage regulation, I²C interface, and comprehensive charging and protection functions in a TQFN-24 (4mm × 4mm) package. #BatteryChargerIC #SingleCellLiIon #LiPolymer #3ACharge #5ABoost #PowerPathManagement #I2C #InputVoltageRegulation #TQFN24 #SGMICRO

I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

Battery Management ICs BQ24040DSQT WSON-10_L2.0-W2.0-P0.40-TL-EP LCSC Part Number: C2876332 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ2404x highly integrated single-cell Li-Ion/Li-Pol linear battery charger IC for space-limited portable applications, supports USB or AC adapter input, selectable 100mA or 500mA USB input current limit, 1% charge voltage accuracy, 10% charge current accuracy, programmable charge termination and precharge thresholds, 4.35V chemistry support on BQ24045, 30V input rating with 6.6V or 7.1V input overvoltage protection, dynamic power management, thermal regulation and 150°C thermal shutdown, OUT short-circuit and ISET short protection, JEITA battery NTC operation, fixed 10-hour safety timer, status indication, available in 10-pin 2x2mm WSON/DFN package. Search Keywords: BQ2404x, BQ24040, BQ24041, BQ24045, Texas Instruments BQ24040, Texas Instruments BQ24041, Texas Instruments BQ24045, TI BQ2404x, BQ24040 battery charger, BQ24041 battery charger, BQ24045 battery charger, single cell Li-Ion charger, Li-Pol battery charger IC, USB battery charger IC, 500mA battery charger, 100mA USB charger, linear battery charger, 4.35V Li-Ion charger, WSON-10 charger, DFN-10 battery charger, 2x2mm charger IC Hashtags: #BQ2404x #BQ24040 #BQ24041 #BQ24045 #TexasInstrumentsBQ24040 #TIBatteryCharger #BatteryChargerIC #LiIonCharger #LiPolCharger #SingleCellCharger #USBChargerIC #LinearBatteryCharger #500mACharger #100mAUSBCharger #435VCharger #JEITACharger #NTCBatteryCharger #WSON10 #DFN10 #2x2mmPackage

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075QRGTRQ1 is an automotive-qualified standalone linear battery charger and power-path management integrated circuit designed for single-cell Li-Ion and Li-Polymer battery applications. The device integrates battery charging, system power regulation, input current limiting, and dynamic power-path management into a compact solution optimized for portable and embedded automotive systems. The charger supports USB and external adapter power sources while automatically managing system load distribution between the input supply and battery. Integrated thermal regulation and safety protection features improve reliability under varying operating conditions and harsh automotive environments. The BQ24075QRGTRQ1 supports programmable charging parameters, battery temperature monitoring, and power-good status reporting. The device is qualified for automotive applications and is suitable for infotainment systems, telematics, portable instrumentation, embedded battery-powered modules, and industrial handheld equipment. Key Features Automotive-qualified battery charger IC Single-cell Li-Ion and Li-Polymer battery support Integrated dynamic power-path management USB and adapter input compatibility Programmable fast-charge current control Integrated thermal regulation Input current limiting capability Battery temperature monitoring support Automatic charge termination functionality Short-circuit and over-temperature protection Power-good and charging status indication Compact surface-mount package Optimized for portable and embedded applications Electrical Characteristics Linear charging architecture High integration power management solution Dynamic load sharing between system and battery Stable regulated system output Programmable charging voltage and current Thermal foldback protection operation Low standby and shutdown current consumption Integrated safety timer functionality Wide input operating voltage range Applications Automotive infotainment systems Portable embedded electronics Industrial handheld equipment Battery-powered control modules Telematics systems USB-powered charging systems Portable instrumentation Data logging devices Embedded IoT products Rechargeable battery management systems Package Information Package Type: VQFN Mounting Type: Surface Mount Automotive-grade integrated circuit package RoHS compliant configuration available #commonpartslibrary #integratedcircuit #batterycharger #powermanagement #automotiveelectronics #lithiumbattery #embeddedhardware #usbcharging #portableelectronics #powerpathmanagement

The BQ25750 is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the SYS terminal voltage.