Ultralow Power NTSC/PAL/SECAM Video Decoder w/Robust Sync Detector #CommonPartsLibrary #IntegratedCircuit #Decoder #Interface #Encoder #Converter

The AS3935 Lightning Detector gives you lightning detection for your next weather project. #IoT #sensor #AS3935

RF IC Synthesizer, VCO VSAT 7.3GHz ~ 14.6GHz SPI Interface 48-LGA (7x7) The ADF5611 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference source. The wideband microwave voltage controlled oscillator (VCO) design permits frequency operation from 7300MHz to 14,600MHz at a single RF output. A series of frequency dividers with a differential frequency output allows operation from 57MHz to 14,600MHz. Analog and digital power supplies for the PLL circuitry range from 3.15V to 3.45V, and the VCO supplies are between 4.75V and 5.25V. The ADF5611 has an integrated VCO with a fundamental frequency of 3650MHz to 7300MHz. These frequencies are internally doubled and routed to the RFOUT pin. An additional differential output allows the doubled VCO frequency to be divided by 1, 2, 4, 8, 16, 32, 64, or 128, allowing the user to generate RF output frequencies as low as 57MHz. A simple 3- or 4-wire serial port interface (SPI) provides control of all on-chip registers. To conserve power, this divider block can be disabled when not needed through the SPI. Likewise, the output power for both the single-ended output and the differential output are programmable. The integrated phase detector and Δ-Σ modulator, capable of operating at up to 100MHz, permit wide loop bandwidths and fast frequency tuning with a typical spurious level of −105dBc. With a VCO open-loop phase noise at an 100kHz offset from −115dBc/Hz at a 7.3GHz RFOUT to −109dBc/Hz at a 14.6GHz RFOUT, the ADF5611 is equipped to minimize blocker effects and to improve receiver sensitivity and transmitter spectral purity. The low phase noise floor eliminates any contribution to modulator and mixer noise floor in transmitter applications. ► RFOUT frequency range: 7300MHz to 14,600MHz ► PDIV_OUT and NDIV_OUT frequency range: 57MHz to 14,600MHz ► Fractional-N synthesizer and integer-N synthesizer modes ► Typical PFD spurious: <−105dBc ► Integrated RMS jitter at 1kHz to 100MHz integration bandwidth: <40fs ► Normalized inband phase noise floor FOM ► Integer mode: −232dBc/Hz ► Fractional mode: −229dBc/Hz ► Maintains frequency lock over −40°C to +85°C (lock and leave) ► Low phase noise VCO ► −115dBc/Hz typical at 100kHz (7.3GHz) ► −114dBc/Hz typical at 100kHz (10GHz) ► −109dBc/Hz typical at 100kHz (14.6GHz) ► RFOUT power (typical): 6dBm ► Programmable divide by 1, 2, 4, 8, 16, 32, 64, or 128 output ► Programmable output power level ► Typical power dissipation: 1W ► 48-terminal, 7 mm × 7 mm LGA package: 49 mm2 #ADF5611BCCZ #ADF5611 #FrequencySynthesizer #PLL #MicrowaveSynthesizer #RFIC #LowPhaseNoise #VCO #WirelessInfrastructure #SatelliteCommunication #MicrowaveRadio #TestAndMeasurement #AnalogDevices #RFDesign #ClockGeneration

Phase Detector, 1 to 100 MHz, 50 Ohm, Mini-Cicuits TTT167 #commonpartslibrary #RF #integratedcircuit

Phase Detector, 400 to 500 MHz, 50 Ohm, Mini-Cicuits TTT167 #commonpartslibrary #RF #integratedcircuit

DC to 6 GHz, 45 dB TruPwr Detector with Envelope Threshold Detection, LFCSP-16 RMS power detector log decibel dB LFCSP*1EP*3x3mm*P0.5mm*

Standard CMOS Voltage Detector IC, Open Drain Output, SSOP3(1pin GND) voltage detector open drain SSOP3 *SOT-23*

Standard CMOS Voltage Detector IC, Open Drain Output, SSOP5 voltage detector open drain SSOP5 *SOT-23*5*

LSM6DSO32X is a low-power 6-axis IMU (Inertial Measurement Unit) from STMicroelectronics that integrates a 3-axis accelerometer with up to ±32g full-scale range and a 3-axis gyroscope with selectable ranges up to ±2000 dps. The device features an embedded Machine Learning Core (MLC), Finite State Machine (FSM), pedometer, step detector, tilt detection, motion classification, and smart sensor processing functions, enabling advanced edge AI and sensor fusion applications without continuous MCU intervention. Communication is supported through SPI, I²C, and MIPI I3C interfaces. Designed for wearable devices, smart watches, asset tracking, IoT products, motion analysis, gesture recognition, navigation systems, and low-power embedded applications. Search Keywords: LSM6DSO32X, ST LSM6DSO32X, 6-axis IMU, inertial measurement unit, accelerometer gyroscope combo, 3-axis accelerometer, 3-axis gyroscope, machine learning sensor, embedded AI sensor, motion sensor, MEMS sensor, pedometer sensor, step counter sensor, tilt detection sensor, gesture recognition sensor, SPI IMU, I2C IMU, I3C sensor, wearable sensor, navigation sensor, sensor fusion IMU, smart motion sensor, asset tracking sensor Hashtags: #LSM6DSO32X #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #MotionSensor #MachineLearningCore #EmbeddedAI #SensorFusion #Pedometer #Wearables #IoT #AssetTracking #Navigation #GestureRecognition #I2C #SPI #I3C #ElectronicComponents

Standard CMOS Voltage Detector IC, Open Drain Output, SSOP3(3pin GND) voltage detector open drain SSOP3 *SOT-23*

100 MHz to 2.5 GHz, 80 dB Logarithmic Detector / Controller, MSOP-8 RF LOG POWER DETECTOR MSOP*3x3mm*P0.65mm*

Standard CMOS Voltage Detector IC, Open Drain Output, VSOF5 voltage detector open drain VSOF5 *VSOF*5*

Built-in Amplifier Type OPIC Light Detector opto receiver amplifier light detector OPIC Sharp*IS485*

Built-in Amplifier Type OPIC Light Detector opto receiver amplifier light detector OPIC Sharp*IS485*

Optical Sensor 935nm Photo Detector, Logic Output Open Collector 3-SIP, Side View

Diode RF 65V 2-Pin DO-7 1N34A germanium signal diode in DO-7 glass package, optimized for radio-frequency (RF) detection and low-voltage signal rectification. Features low forward voltage drop, low leakage current, low junction capacitance, and fast response characteristics. Rated for up to 65V peak inverse voltage (PIV), 50mA average rectified current, and 200mA repetitive forward surge current. Commonly used in AM/FM detectors, crystal radios, RF probes, envelope detectors, vintage audio circuits, TV/FM discriminator stages, and guitar distortion effects. Search Keywords: 1N34A, 1N34A germanium diode, germanium signal diode, DO-7 diode, RF detector diode, AM detector diode, FM detector diode, crystal radio diode, low forward voltage diode, vintage germanium diode, RF probe diode, envelope detector diode, audio clipping diode, germanium rectifier diode Hashtags: #1N34A #GermaniumDiode #RFDiode #SignalDiode #DO7Package #CrystalRadio #AMDetector #FMDetector #EnvelopeDetector #LowForwardVoltage #VintageElectronics #RFProbe #AudioEffects #GuitarPedal #RectifierDiode

Maxim Integrated PLL Frequency Synthesizer Single 23.5MHz to 6000MHz 32-Pin TQFN EP QFN-32 Maxim None MAX2871ETJ+ Unavailable Maxim Integrated MAX2871 ultra-wideband fractional-N / integer-N PLL frequency synthesizer with integrated VCOs, capable of generating RF frequencies from 23.5MHz to 6.0GHz. Features programmable output dividers (1/2/4/8/16/32/64/128), dual differential RF outputs with programmable output power from -1dBm to +8dBm, low phase noise performance, phase frequency detector up to 140MHz, reference frequency up to 210MHz, fast lock and cycle-slip reduction, automatic/manual VCO selection, on-chip temperature sensor with 7-bit ADC, 4-wire SPI-compatible serial interface, and operation from -40°C to +85°C. Suitable for wireless infrastructure, clock generation, microwave radios, RF signal generation, and test & measurement equipment. MAX2871 Search Keywords: MAX2871, Maxim MAX2871, Analog Devices MAX2871, PLL synthesizer, RF synthesizer, fractional N synthesizer, integer N synthesizer, 6GHz frequency synthesizer, RF signal generator IC, integrated VCO synthesizer, microwave synthesizer, SPI frequency synthesizer, dual output PLL, clock generation IC, wireless infrastructure synthesizer Hashtags: #MAX2871 #MaximIntegrated #AnalogDevices #PLLSynthesizer #FrequencySynthesizer #RFSynthesizer #FractionalNPLL #IntegerNPLL #IntegratedVCO #RFSignalGenerator #MicrowaveRadio #ClockGeneration #WirelessInfrastructure #SPIInterface #TestAndMeasurement #RFDesign #RFIC #PhaseLockedLoop

TOUCH PAD DETECTOR IC

Attitude Sensors LSM6DSO32TR LGA-14_L3.0-W2.5-P0.50-TL LCSC Part Number: C1864162 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体)STMicroelectronics LSM6DSO32 iNEMO 6-axis inertial measurement unit, integrated always-on 3D digital accelerometer and 3D digital gyroscope, accelerometer full-scale ranges ±4/±8/±16/±32g, gyroscope full-scale ranges ±125/±250/±500/±1000/±2000dps, low power consumption, 1.71V to 3.6V supply voltage, SPI/I2C/MIPI I3C interface, smart FIFO up to 9kbytes, embedded pedometer, step detector, tilt detection and motion functions, embedded temperature sensor, -40°C to +85°C operating range, compact 14-lead LGA 2.5 x 3.0 x 0.83mm package. Search Keywords: LSM6DSO32, ST LSM6DSO32, STMicroelectronics LSM6DSO32, LSM6DSO32TR, iNEMO inertial module, 6-axis IMU, 3D accelerometer gyroscope, 32g accelerometer, 2000dps gyroscope, LSM6DSO32 IMU sensor, LSM6DSO32 accelerometer, LSM6DSO32 gyroscope, SPI I2C I3C IMU, LGA-14 IMU, 2.5x3mm IMU, LSM6DSO32 datasheet Hashtags: #LSM6DSO32 #LSM6DSO32TR #STMicroelectronics #STIMU #iNEMO #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #3DAccelerometer #3DGyroscope #32gAccelerometer #2000dpsGyroscope #I2CSensor #SPISensor #I3CSensor #LGA14 #MotionSensor

The Broadcom® 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification up to 15,000 V/µs at Vcm = 1000V. This unique design provides maximum AC and DC circuit isolation while achieving TTL compatibility. The optocoupler AC and DC operational parameters are guaranteed from – 40°C to +85°C allowing trouble-free system performance.  15 kV/µs minimum Common Mode Rejection (CMR) at VCM= 1 kV for HCNW2611, HCPL-2611, HCPL-4661, HCPL-0611, HCPL-0661  High speed: 10 MBd typical  LSTTL/TTL compatible  Low input current capability: 5 mA  Guaranteed AC and DC performance over temperature: –40°C to +85°C  Available in 8-Pin DIP, SOIC-8, widebody packages  Strobable output (single channel products only)  Safety approval – UL recognized – 3750 Vrms for 1 minute and 5000 Vrms for 1 minute per UL1577 CSA approved (5000 Vrms/1 Minute rating is for HCNW137/26X1 and Option 020 [6N137, HCPL-2601/11/30/31, HCPL-4661] products only) – IEC/EN/DIN EN 60747-5-5 approved with:  VIORM = 567 Vpeak for 06xx Option 060  VIORM = 630 Vpeak for 6N137/26xx Option 060  VIORM =1414 Vpeak for HCNW137/26x1  MIL-PRF-38534 hermetic version available (HCPL56xx/66xx) #CommonPartsLibrary #Isolator #Optocoupler

ATTINY1616-MFR QFN-20_L3.0-W3.0-P0.40-TL-EP1.7 LCSC Part Number: C1338523 JLCPCB Part Class: Extended Part Manufactured by MICROCHIP(美国微芯) Microchip ATtiny1614/1616/1617 tinyAVR 1-series 8-bit microcontroller, AVR CPU running up to 20MHz, up to 16KB self-programmable Flash memory, 256B EEPROM and 2KB SRAM, 1.8V to 5.5V operating voltage range, single-pin UPDI programming and debug interface, power-on reset and brown-out detector, internal 16/20MHz oscillator, timers, watchdog, USART, SPI, I2C/TWI, 10-bit ADC, DAC, analog comparators, event system, configurable custom logic and peripheral touch controller, available in 14-pin, 20-pin and 24-pin packages depending on variant. Search Keywords: ATtiny1614, ATtiny1616, ATtiny1617, Microchip ATtiny1614, Microchip ATtiny1616, Microchip ATtiny1617, tinyAVR 1-series, AVR 8-bit microcontroller, ATtiny 16KB Flash, ATtiny UPDI, ATtiny1616 microcontroller, ATtiny1617 MCU, ATtiny1614 MCU, 20MHz AVR microcontroller, ATtiny I2C SPI USART, ATtiny1616 datasheet, ATtiny1614 datasheet, ATtiny1617 datasheet Hashtags: #ATtiny1614 #ATtiny1616 #ATtiny1617 #MicrochipATtiny #MicrochipMCU #tinyAVR #tinyAVR1Series #AVRMicrocontroller #8bitMicrocontroller #ATtinyMCU #UPDI #16KBFlashMCU #20MHzMCU #I2CMCU #SPIMCU #USARTMCU #ADCmicrocontroller #TouchControllerMCU

This is an 8-layer diode-based VCA audio compressor PCB Design that works in mono. The compressor has LED-based gain reduction metering, input gain preamplification control, output gain control, and a fast-attack switch akin to the SSL channel-strip compressors. Included is a full-wave rectifier module I published to the library which is connected to a peak detector block for the attack and release implementation. The module is to be powered by a regular outlet.

The HB100 microwave module is a microwave moving object detector designed by the principle of Doppler Radar.

3D accelerometer and 3D gyroscope The LSM6DS3TR-C is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.90 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DS3TR-C supports main OS requirements, offering real, virtual and batch sensors with 4 kbyte for dynamic data batching. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element. The LSM6DS3TR-C has a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±250/±500/±1000/±2000 dps. High robustness to mechanical shock makes the LSM6DS3TR-C the preferred choice of system designers for the creation and manufacturing of reliable products. The LSM6DS3TR-C is available in a plastic land grid array (LGA) package. Features  “Always-on” experience with low power consumption for both accelerometer and gyroscope  Power consumption: 0.90 mA in combo highperformance mode  Smart FIFO up to 4 kbyte based on features set  Android M compliant  Hard, soft ironing for external magnetic sensor corrections  ±2/±4/±8/±16 g full scale  ±125/±250/±500/±1000/±2000 dps full scale  Analog supply voltage: 1.71 V to 3.6 V  Independent IO supply (1.62 V)  Compact footprint, 2.5 mm x 3 mm x 0.83 mm  SPI & I2C serial interface with main processor data synchronization feature  Pedometer, step detector and step counter  Significant motion and tilt function  Standard interrupts: free-fall, wakeup, 6D/4D orientation, click and double-click  Embedded temperature sensor  ECOPACK®, RoHS and “Green” compliant #CommonPartsLibrary #Sensor

Earth Leakage Detector PMIC 8-SOIC #commonpartslibrary #integratedcircuit #powermanagement