Isolated DC-DC Converter Module – 3 W regulated isolated DC-DC converter for industrial automation, instrumentation, telecommunications, process control, and embedded power applications. Accepts a 9 V to 27 V DC input (3:1 input range) and provides dual ±15 V regulated outputs at ±100 mA, delivering 3 W maximum output power. Features 3 kVDC input-to-output isolation, up to 83% efficiency, remote ON/OFF control, continuous short-circuit protection, low ripple and noise, and no minimum load requirement for reliable isolated power conversion. Designed for through-hole PCB mounting in an SIP-8 package, it operates over a −40°C to +71°C temperature range and complies with IEC/EN/UL 60950-1 safety standards and RoHS requirements. #RECOM #RS32415DZH3 #RS3Series #DCDCConverter #IsolatedPower #DualOutput #15VPowerSupply #3WConverter #IndustrialPower #EmbeddedPower #SIP8 #EmbeddedSystems

Synchronous DRAM (SDRAM) – 256 Mbit (16M × 16, 4-bank) synchronous dynamic RAM for high-speed data storage, operating from a 3.0 V to 3.6 V supply. Supports clock frequencies up to 200 MHz, CAS latencies of 2 and 3, programmable burst lengths of 1, 2, 4, 8, and full page, sequential or interleaved burst operation, auto-precharge, power-down mode, and self-refresh mode. Features an LVTTL interface, 8K refresh cycles, and is specified for an operating temperature range of −40°C to +85°C. Housed in a 54-pin TSOP-II package. #Winbond #W9825G6KH5I #SDRAM #SynchronousDRAM #256Mbit #16Mx16 #200MHz #3_3V #LVTTL #TSOPII54 #VolatileMemory #EmbeddedSystems

Low-Voltage DC High-Current PCB Connector – 2-position XT60-type power connector designed for high-current DC power connections. The KaiFeng Electronics DFT-XT60PB-M30.G.Y is a vertical PCB-mount male connector with 3.0 mm PCB solder legs, rated for 35 A maximum current and 500 V DC maximum voltage. It provides a 100-cycle mating life, IP40 protection, and −20°C to +120°C operating temperature range, with a UL94 V-0 flammability rating. #KaiFeng #DFTXT60PBM30GY #XT60 #PowerConnector #HighCurrentConnector #DCPower #PCBConnector #PowerElectronics #BatteryConnection #EmbeddedSystems

32-bit Arm Cortex-M33 Microcontroller – High-performance MCU with TrustZone security, DSP and floating-point support, operating at up to 250 MHz. The STMicroelectronics STM32H563VIT7 integrates 2 MB Flash, 640 KB SRAM, up to 80 GPIOs, 16-channel 12-bit ADC, 12-bit DAC, and interfaces including SPI, I²C, UART/USART, USB, CAN FD, Ethernet, SDIO, and OCTOSPI. It operates from 1.71 V to 3.6 V and is housed in a 100-pin LQFP (14 × 14 mm) package, with an operating temperature range of −40°C to +105°C. #STMicroelectronics #STM32H563VIT7 #STM32H5 #Microcontroller #CortexM33 #MCU #TrustZone #250MHz #EmbeddedSystems #ARM #IoT #IndustrialElectronics

32-Bit Automotive Microcontroller – Tri-core Arm Cortex-M7 MCU designed for automotive control, body/zonal control, motor control, and embedded real-time applications. The NXP S32K358GHT1MPCST operates at up to 240 MHz and provides 8 MB Flash, 1.125 MB RAM, and a 2.97–5.5 V supply range. It includes CAN FD, Ethernet, LIN, FlexIO, I²C, SPI, UART, QSPI, SAI, and SENT interfaces, along with 24-channel 12-bit ADCs. The device integrates hardware security and functional-safety features and is housed in a 172-pin HDQFP (16 × 16 mm) package, with an operating temperature range of −40°C to +125°C. #NXP #S32K358 #S32K3 #Microcontroller #CortexM7 #AutomotiveMCU #CANFD #Ethernet #LIN #EmbeddedSystems #AutomotiveElectronics

Board-to-Board Mezzanine Connector – 40-position board-to-board mezzanine connector for compact embedded systems, industrial electronics, consumer devices, communication modules, and high-density PCB interconnect applications. Features a 0.4 mm pitch, 2-row, vertical (180°) surface-mount configuration, and supports 300 mA maximum current per contact with a 60 V voltage rating. Constructed with gold-plated phosphor bronze contacts for excellent conductivity and long-term reliability, the connector is designed for high-density PCB stacking in space-constrained applications. Specified for operation over a −55°C to +85°C temperature range and supplied in an SMT package. #TXGA #FBB04004F40S1003K6M #BoardToBoardConnector #MezzanineConnector #40PinConnector #040mmPitch #SMTConnector #PCBInterconnect #HighDensityConnector #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics

Digital MEMS Barometric Pressure Sensor – Ultra-compact absolute MEMS barometric pressure sensor with an integrated temperature sensor and 24-bit digital output for altimeters, weather stations, GPS, drones, wearables, industrial monitoring, and IoT applications. Operates from a 1.7 V to 3.6 V supply, measures 260 hPa to 1260 hPa (26 kPa to 126 kPa) absolute pressure with ±0.5 hPa absolute accuracy, and communicates via I²C, SPI, or MIPI I3C℠ interfaces. Features low power consumption (4 µA typical at 1 Hz), embedded temperature compensation, 24-bit pressure output, integrated FIFO, programmable output data rates from 1 Hz to 200 Hz, interrupt generation, and 22,000 g shock survivability. Specified for operation over a −40°C to +85°C temperature range and housed in a 10-pin HLGA (2.0 × 2.0 × 0.73 mm) surface-mount package. #STMicroelectronics #LPS22HHTR #MEMSSensor #PressureSensor #Barometer #DigitalPressureSensor #TemperatureSensor #I2C #SPI #I3C #WeatherStation #Altimeter #EmbeddedSystems

Automotive 8-Channel Audio DAC IC – 24-bit, 8-channel audio digital-to-analog converter (DAC) with differential voltage outputs for automotive infotainment systems, digital audio processors, multimedia receivers, professional audio equipment, and embedded audio applications. Supports sampling rates from 8 kHz to 192 kHz with 24-bit resolution, delivering 113 dB signal-to-noise ratio (SNR) and −94 dB THD+N (0.002% typical) for high-fidelity audio reproduction. Operates from 3.0 V to 3.6 V digital/analog supplies with a 5 V output stage supply, and supports I²S, left-justified, right-justified, and DSP audio interfaces with hardware, I²C, and SPI control modes. Features independent digital volume control, soft mute, zero-cross detection, digital de-emphasis, programmable attenuation, and internal oversampling digital filters. Qualified to AEC-Q100 for automotive applications, it operates over a −40°C to +85°C temperature range and is housed in a 48-pin HTSSOP package. #TexasInstruments #PCM1690IDCARQ1 #PCM1690Q1 #AudioDAC #24BitDAC #8ChannelDAC #I2S #SPI #I2C #AutomotiveAudio #Infotainment #EmbeddedSystems

802.15.4, Bluetooth Bluetooth v5.3, Zigbee® Transceiver Module PCB Trace, Antenna Not Included, U.FL Surface Mount #BT840NE #Fanstel #BluetoothModule #BluetoothLE #Bluetooth5_3 #Zigbee #IEEE802154 #nRF52840 #RFModule #WirelessModule #IoT #EmbeddedSystems #SurfaceMount #PCBTraceAntenna #UFLAntenna #LowPowerWireless #CommonPartsLibrary

Wi-Fi HaLow® RF Transceiver Module – IEEE 802.11ah (Wi-Fi HaLow®) RF transceiver module for sub-GHz wireless connectivity in IoT and machine-to-machine (M2M) applications. Operates over the 850 MHz to 950 MHz frequency range with data rates up to 43.3 Mbps, 26 dBm maximum transmit power, and −107 dBm receiver sensitivity. Supports 64-QAM and 256-QAM modulation, operates from a 3.1 V to 3.6 V supply, and provides GPIO, SDIO, SPI, UART, and USB interfaces. Designed with an RF pad antenna interface, specified for operation over a −40°C to +85°C temperature range, and housed in a 38-pad surface-mount module. #MorseMicro #MM8108MF15457 #WiFiHaLow #IEEE80211ah #RFModule #WirelessModule #SubGHz #IoT #M2M #SDIO #SPI #UART #USB #EmbeddedSystems

24 GHz Human Presence Radar Sensor Module – 24 GHz FMCW millimeter-wave human presence detection module designed for smart home automation, occupancy sensing, lighting control, security systems, industrial automation, IoT devices, and embedded presence detection applications. Operates from a 5 V to 12 V supply with a typical current consumption of 79 mA and detects both moving and stationary human targets using Frequency-Modulated Continuous Wave (FMCW) radar technology. Features a UART digital communication interface, configurable detection thresholds, event/occupancy detection, high immunity to ambient light, temperature, smoke, and dust, and supports motion, micro-motion, and static presence detection without requiring direct line-of-sight. The module measures 22 × 16 mm, is designed for surface-mount installation, and operates over a −40°C to +85°C temperature range, making it suitable for long-term embedded and industrial deployments. #HiLink #HLKLD2410CP #HLKLD2410C #24GHzRadar #HumanPresenceSensor #FMCWRadar #OccupancySensor #MotionDetection #UART #IoT #SmartHome #EmbeddedSystems

4.897 MHz Surface-Mount Quartz Crystal – AT-cut fundamental-mode quartz crystal designed for microcontrollers, wireless modules, communication equipment, industrial control systems, timing circuits, embedded electronics, and IoT devices. Part of the Abracon ABLS Series, it provides a 4.897 MHz operating frequency with ±50 ppm frequency tolerance, ±50 ppm frequency stability, 20 pF load capacitance, and 70 Ω maximum ESR for reliable clock generation. Features a 100 µW typical drive level (1 mW max), HC-49/US low-profile SMD package, and fundamental resonance mode for stable oscillator performance. Designed for surface-mount assembly, it operates over a −40°C to +85°C temperature range and is suitable for general-purpose embedded and industrial timing applications. #Abracon #ABLS4897MHZ20R70DT #QuartzCrystal #49MHzCrystal #ClockCrystal #TimingDevice #HC49US #SMDCrystal #Microcontroller #IndustrialElectronics #EmbeddedSystems

Capacitive Touch Sensor Controller for projected capacitive (PCAP) touch panels, supporting up to 40 touch channels with USB, I²C, and UART host interfaces. The ILI2511 operates from a 3.3 V supply, integrates touch sensing, signal processing, and host communication in a single chip, and is housed in an 88-pin QFN package for industrial, POS, and ATM touch applications. #ILITEK #ILI2511 #CapacitiveTouchController #TouchController #PCAP #USB #I2C #UART #QFN88 #HumanMachineInterface #EmbeddedSystems #PCBLibrary

Synchronous Buck Switching Regulator – Step-down DC-DC converter for generating an adjustable output voltage from a 3 V to 36 V input. The Texas Instruments LMR43610MB3RPER supports up to 1 A output current, a 1 MHz switching frequency, and an adjustable output voltage with a 1 V minimum and 34.2 V maximum. It uses a synchronous rectifier and is housed in a 9-VQFN-HR (2 × 2 mm) surface-mount package. #TexasInstruments #LMR43610 #BuckConverter #DCDCConverter #SwitchingRegulator #PowerManagement #VoltageRegulator #EmbeddedSystems

20 Watt DC/DC converter, medical, 4:1 input, 5000 VAC I/O-isolation (2 x MOPP), low leakage current, encapsulated, 1.6\" x 1\" THM20WI Series is a 20 W medical-grade isolated DC/DC converter family from TRACO Power designed for medical, industrial, transportation, control, measurement, and IGBT driver applications. The series features an ultra-wide 4:1 input voltage range, reinforced 5000 VAC isolation, low leakage current (<2.5 µA), and compliance with IEC/EN/ES 60601-1 (2 x MOPP) medical safety standards. Housed in a compact 1.6" × 1.0" package, the converters operate from -40°C to +80°C and provide high efficiency up to 89%. The THM20WI series is suitable for patient-connected medical equipment, industrial control systems, instrumentation, and high-reliability power conversion applications requiring reinforced isolation and long-term reliability. Search Keywords: THM20WI, THM20WI Series, TRACO Power THM20WI, Medical DC DC Converter, 20W DC DC Converter, Isolated DC DC Converter, 5000VAC Isolation, Reinforced Isolation Converter, IEC60601-1 Power Supply, Medical Power Module, 2xMOPP Converter, Wide Input DC DC Converter, Industrial Power Converter, IGBT Driver Power Supply, Measurement Equipment Power Supply, Medical Electronics Power Supply, High Isolation Converter, Embedded Power Module, PCB Mount DC DC Converter, TRACO Medical Converter Hashtags: #THM20WI #TRACOPower #DCDCConverter #MedicalPowerSupply #MedicalElectronics #IsolatedConverter #PowerModule #PowerElectronics #IEC60601 #MOPP #IndustrialElectronics #IGBTDriver #EmbeddedSystems #PowerSupplyDesign #ElectronicsDesign #PCBDesign #MedicalDevice #HighIsolation #IndustrialAutomation #HardwareDesign

LCD Segment Driver Controller – 40 × 4 (160-segment) low-power LCD driver with an I²C-bus interface for segment LCD displays used in utility meters, thermostats, appliances, industrial instrumentation, medical devices, and consumer electronics. Operates from a 2.5 V to 5.5 V supply and supports static, 1:2, 1:3, and 1:4 multiplex drive modes with an integrated display RAM for direct segment control. Features internal LCD voltage generation with bias circuitry, programmable frame frequency, software-configurable display modes, low-power standby mode, display blanking, auto-increment addressing, and cascade capability for driving larger LCD panels. Communicates via a 400 kHz I²C interface, operates over a −40°C to +85°C temperature range, and is housed in a 56-pin TSSOP package. (nxp.com) #NXP #PCF8576DT2518 #PCF8576 #LCDDriver #SegmentLCD #LCDController #I2C #DisplayDriver #LowPower #IndustrialElectronics #ConsumerElectronics #EmbeddedSystems

22 µH Shielded Molded Power Inductor – High-current surface-mount power inductor designed for DC-DC converters, voltage regulators, VRM/VRD applications, power supplies, battery management systems, industrial automation, automotive electronics, and embedded power-management circuits. The Coilcraft XAL7070-223MEC features a 22 µH inductance (±20%) with a metal-composite molded core and shielded construction, providing high current capability with low EMI. It has a 39.7 mΩ maximum DCR, 5.6 A saturation current (Isat), and 4.7 A RMS current rating at a 20°C temperature rise. Coilcraft specifies an 8.1 MHz typical self-resonant frequency, 0–60 V operating voltage, and an operating ambient temperature range of −40°C to +125°C. The component measures approximately 7.5 × 7.2 × 7.0 mm, uses tin-silver over copper terminations, and is AEC-Q200 qualified, making it suitable for automotive and demanding industrial applications. The XAL7070 series uses soft-saturation characteristics, which makes this family particularly useful in VRM/VRD and high-current switching applications where inductance needs to remain relatively stable as load current increases. #Coilcraft #XAL7070 #XAL7070223MEC #PowerInductor #22uH #ShieldedInductor #MoldedInductor #DCDCConverter #VRM #VRD #AECQ200 #AutomotiveElectronics #PowerManagement #EmbeddedSystems

Connector Header Surface Mount 10 position 0.039" (1.00mm) #JST #BM10BSRSSTB #SHSeries #BoardToWire #SMTConnector #MaleHeader #OneMillimeterPitch #PCBConnector #EmbeddedSystems #ElectronicsDesign #SurfaceMount #Interconnect

12 MHz Crystal Oscillator Circuit Module #Module This module is designed to generate a highly stable and precise 12 MHz clock signal using a crystal oscillator. It incorporates a carefully selected load capacitor network and proper grounding techniques to ensure minimal frequency drift and robust performance across digital applications. This circuit is optimized for use in timing-critical systems where consistent frequency output is essential. #CrystalOscillator #CircuitModule #ClockSignal #EmbeddedSystems #DigitalCircuits #PCBDesign

Pseudo Static RAM (PSRAM) – 256 Mbit (32 MB) Octal SPI/Xccela PSRAM organized as 32M × 8 or 16M × 16, supporting Octal Peripheral Interface (OPI) and HyperBus™ Interface (HPI) with DDR operation. Operates from a 1.62 V to 1.98 V supply, supports clock frequencies up to 200 MHz with up to 400 MB/s read/write throughput, and features byte-addressable memory, Data Strobe (DQS), Data Mask (DM), programmable output drive strength, and software reset. Specified for an operating temperature range of −40°C to +85°C and housed in a 24-ball mini-BGA (6 × 8 mm) package. #APMemory #APS256XXNOB9BG #PSRAM #PseudoSRAM #OctalSPI #OPI #HyperBus #Xccela #DDR #256Mbit #32MB #1_8V #BGA24 #EmbeddedMemory #EmbeddedSystems

Semi-Shielded Power Inductor – 100 µH semi-shielded wirewound power inductor for DC-DC converters, power supplies, energy storage, and EMI filtering. Features a ferrite drum core, 1 A RMS current rating, 1.2 A saturation current, 433 mΩ maximum DC resistance (DCR), and ±20% inductance tolerance. Provides a 6.3 MHz self-resonant frequency, surface-mount (SMD) construction, AEC-Q200 automotive qualification, and operates over a −40°C to +125°C temperature range. Housed in a 6.0 × 6.0 × 4.5 mm (6045) semi-shielded package as part of the WE-LQS series. #WurthElektronik #74404064101 #WELQS #PowerInductor #SemiShieldedInductor #100uH #Wirewound #SMD #DCDCConverter #PowerSupply #AECQ200 #EmbeddedSystems