Part Datasheet Review

flux

I’m blocked because there are still no available ACUs, so I can’t inspect or mutate the component pins in the project.
Planned update once ACUs are available:
  • Use broad/general functional groups.
  • Ensure each physical pin belongs to exactly one Pin Group.
  • Add Section to every pin with the same value as its Pin Group.
  • Assign:
    • Power → Terminal Order 1, Orientation Top
    • Ground → Terminal Order 10, Orientation Bottom
  • Assign remaining groups Terminal Order 2–9, split across Left and Right so sections are not all on one side.
I’ll apply this directly to the part symbol when ACUs are restored.
A

adrian95

Use these remaining orientations: inputs left, outputs right, control left, comms right.

flux

Understood. I’ll use this orientation scheme when ACUs are available and I can edit the project:
  • Power → Terminal Order 1, Orientation Top
  • Inputs → Orientation Left
  • Outputs → Orientation Right
  • Control → Orientation Left
  • Comms → Orientation Right
  • Ground → Terminal Order 10, Orientation Bottom
I’ll also keep Section equal to Pin Group for every pin and ensure no pin is assigned to more than one group.
Fix pin sections
Arrange symbol pins
Check pin grouping

Waiting for input

Sign up to send

Files

Pins

Symbol

Layout

3D View

BP3
Pin Number
3
S0
Pin Number
4
BP2
Pin Number
1
BP1
Pin Number
2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
BP2
1
Unspecified
BP1
2
Unspecified
BP3
3
Unspecified
S0
4
Unspecified
S1
5
Unspecified
S2
6
Unspecified
S3
7
Unspecified
S4
8
Unspecified
S5
9
Unspecified
S6
10
Unspecified
S7
11
Unspecified
S8
12
Unspecified
S9
13
Unspecified
S10
14
Unspecified
S11
15
Unspecified
S12
16
Unspecified
S13
17
Unspecified
S14
18
Unspecified
S15
19
Unspecified
S16
20
Unspecified
S17
21
Unspecified
S18
22
Unspecified
S19
23
Unspecified

PCF8576DT/2,518