Octal D-Type Flip-Flop with Clock Enable – 8-channel positive-edge-triggered D-type flip-flop with a latched clock-enable input (CLKEN), designed for synchronous data storage and transfer. The Texas Instruments SN74HC377NSR operates from 2 V to 6 V, supports clock frequencies up to 28 MHz, and provides push-pull outputs with ±4 mA output drive at 5 V. It has a typical propagation delay of 12 ns, operates from −40°C to +85°C, and is housed in a 20-pin SOP (NS) package. #TexasInstruments #SN74HC377NSR #DTypeFlipFlop #FlipFlop #ClockEnable #DigitalLogic #SequentialLogic #74HC #SOP20 #EmbeddedSystems

SMPS Flyback Transformer for Capacitor Charger Applications – Surface-mount flyback transformer designed for capacitor charging circuits, isolated DC-DC converters, industrial power supplies, medical equipment, test instruments, laser drivers, photoflash systems, and embedded power applications. The Würth Elektronik 750032052 is part of the WE-FB Series, optimized for use with the Analog Devices (Linear Technology) LT3751 capacitor charger controller. It features a 10 µH primary inductance (measured at 10 kHz), 18 V to 30 V primary input range, and 1000 Vrms isolation voltage, providing efficient energy transfer in high-voltage capacitor charging designs. Constructed for surface-mount assembly, it operates over a −40°C to +125°C temperature range and is housed in a compact 21.97 × 28.70 mm footprint with an 11.58 mm maximum height, making it suitable for high-reliability industrial and embedded systems. #WurthElektronik #750032052 #WEFB #FlybackTransformer #SMPSTransformer #CapacitorCharger #LT3751 #DCDCConverter #IsolatedPower #IndustrialElectronics #EmbeddedPower #EmbeddedSystems

Power over Ethernet (PoE) Flyback Transformer – Surface-mount flyback transformer optimized for Power over Ethernet (PoE) powered devices, isolated DC-DC converters, industrial Ethernet equipment, IP cameras, wireless access points, IoT gateways, and embedded networking applications. Part of the Würth Elektronik WE-PoE+ Series, it is specifically designed for use with the Analog Devices LT4276 PoE PD controller and supports IEEE 802.3at (PoE+) power conversion. Features 38 µH primary inductance (100 kHz), 37 V to 57 V primary input, 12.5 V auxiliary winding at 30 mA, 1,500 Vrms isolation voltage, and operation over a 250 kHz to 400 kHz switching frequency. Built in a compact surface-mount package (13.46 × 15.00 × 12.70 mm), it is specified for −40°C to +125°C operation, making it ideal for high-efficiency isolated PoE power supplies in demanding industrial and embedded environments. #WurthElektronik #750310742 #WEPoEPlus #PoETransformer #FlybackTransformer #PowerOverEthernet #IEEE8023at #LT4276 #DCDCConverter #IndustrialEthernet #EmbeddedPower #EmbeddedSystems

Isolated Quarter-Brick DC-DC Converter Module – 150 W regulated isolated DC-DC converter for industrial automation, railway systems, telecommunications, networking equipment, and embedded power applications. Accepts a 9 V to 36 V DC input (4:1 input range) and provides a regulated 12 V DC output at 12.5 A, delivering 150 W maximum output power. Features 2.25 kVDC input-to-output isolation, up to 92% efficiency, remote ON/OFF control (positive logic), output voltage trim, low no-load power consumption, and comprehensive protection including undervoltage lockout (UVLO), overcurrent (OCP), overvoltage (OVP), overtemperature (OTP), and continuous short-circuit protection (SCP). Designed in an industry-standard quarter-brick through-hole package (57.9 × 36.8 × 12.7 mm), it operates over a −40°C to +105°C case temperature range (with derating) and complies with IEC/UL 62368-1, EN50155 (with external circuitry), EN61373 shock/vibration, and EN45545-2 fire and smoke requirements. #Cincon #CQB150W24S12 #CQB150W #DCDCConverter #IsolatedPower #QuarterBrick #150WConverter #12V12A #IndustrialPower #RailwayElectronics #EmbeddedPower #EmbeddedSystems

DC-DC LED Driver Module – 700 mA constant-current step-down (buck) LED driver for high-power LED lighting applications. Operates from a 6 V to 36 V DC input, delivers a 700 mA regulated output current, and supports an output voltage up to 32 V DC. Features up to 95% efficiency, PWM and analog dimming control, enable/shutdown function, short-circuit protection, overtemperature protection, and open-LED protection. Housed in a compact SIP-8 through-hole package and specified for operation over a −40°C to +70°C temperature range. #MEANWELL #NLDD700H #LEDDriver #ConstantCurrentDriver #BuckConverter #DCDCConverter #700mA #PWMDimming #AnalogDimming #PowerManagement #SIP8 #EmbeddedSystems

5-Tap Fixed Digital Delay Line IC – Non-programmable CMOS delay line designed for clock timing adjustment, pulse alignment, data synchronization, digital signal timing, communication systems, industrial control, test equipment, and embedded digital applications. Features a total fixed delay of 50 ns with five equally spaced taps, providing 10 ns delay increments from the input. Operates from a 4.75 V to 5.25 V supply and accurately reproduces both leading and trailing signal edges with TTL/CMOS-compatible inputs and outputs. Built using 100% silicon delay-line technology, it offers stable and precise timing, low-power CMOS operation, and can drive up to 10 standard 74LS loads per tap. Designed for surface-mount assembly, it operates over a −40°C to +85°C temperature range and is housed in a compact 8-pin SOIC package. #AnalogDevices #MaximIntegrated #DS1100Z50 #DS1100 #DelayLine #DigitalDelay #ClockTiming #SignalSynchronization #CMOS #TTLCompatible #TimingCircuit #EmbeddedSystems

Differential MEMS Pressure Sensor – High-accuracy differential MEMS pressure sensor with 15-bit digital output and analog voltage output for medical devices, HVAC systems, industrial automation, airflow monitoring, leak detection, pneumatic control, and embedded sensing applications. Operates from a 3.0 V to 3.6 V supply and measures differential pressure from −1 kPa to +1 kPa (±0.15 PSI) with ±0.75% full-scale accuracy. Features I²C and analog output interfaces, integrated temperature compensation, 15-bit pressure resolution, embedded temperature sensor, 2.2 ms response time, and dual barbed pressure ports for direct tubing connection. Designed for surface-mount assembly in an 8-pin dual-port SMD package, it operates over a −25°C to +85°C temperature range and supports board-mounted differential pressure measurement. #WurthElektronik #2513130810102 #WSENPDUS #DifferentialPressureSensor #MEMSSensor #PressureSensor #I2C #AnalogOutput #TemperatureCompensated #AirflowSensor #IndustrialElectronics #EmbeddedSystems

Isolated DC-DC Converter Module – Single-output isolated DC-DC converter providing a regulated 15 V output at up to 2 A (30 W) from a 9 V to 36 V DC input. Features 1.5 kVDC input-to-output isolation, 89% typical efficiency, adjustable output voltage (13.5 V to 16.5 V), remote ON/OFF control, overcurrent protection (OCP), and operates over a −40°C to +85°C temperature range. Housed in a 1 × 1 inch, 6-DIP through-hole module. #TDKLambda #CCG302415S #DCDCConverter #IsolatedConverter #PowerModule #15VOutput #30W #9To36VInput #1_5kVIsolation #ThroughHole #PowerManagement #EmbeddedSystems

EEPROM Memory IC 2Kbit I2C 400 kHz 900 ns SOT-23-5 EEPROM memory providing 2 Kbit (256 × 8) nonvolatile data storage over an I²C-compatible serial interface. It operates from a 2.5 V to 5.5 V supply, supports up to 400 kHz clock frequency, and features a 16-byte page write buffer, self-timed erase/write cycles, and more than 1 million erase/write cycles with data retention exceeding 200 years. #EEPROM #SerialEEPROM #I2C #NonVolatileMemory #2Kbit #256x8 #Microchip #EmbeddedSystems #PCBLibrary #SOT23

Single Unbuffered Inverter Gate – Single CMOS inverter with an unbuffered output for high-speed logic applications, operating from a 0.8 V to 2.7 V supply. Features 3.6 V I/O-tolerant inputs for mixed-voltage operation, up to ±8 mA output drive at 1.8 V, 2.4 ns maximum propagation delay at 1.8 V, partial-power-down (Ioff) support, and push-pull output. Specified for an operating temperature range of −40°C to +85°C and housed in a 5-pin SOT-23 (DBV) package. #TexasInstruments #SN74AUC1GU04DBVR #SN74AUC1GU04 #Inverter #LogicGate #CMOSLogic #SingleGate #UnbufferedInverter #HighSpeedLogic #LowVoltageLogic #SOT23 #EmbeddedSystems

MMCX RF Coaxial Receptacle Connector – Right-angle through-hole MMCX female receptacle with 50 Ω impedance for RF signal connections up to 6 GHz. Features a snap-on mating interface, beryllium copper center contact with gold plating, brass body with gold finish, PTFE dielectric, 170 V voltage rating, 500 mating cycles, and operates over a −55°C to +165°C temperature range. Designed for PCB mounting with solder termination. #Molex #0734151001 #MMCX #RFConnector #CoaxialConnector #MMCXReceptacle #50Ohm #6GHz #RightAngle #ThroughHole #GoldPlated #EmbeddedSystems

Synchronous Buck DC/DC Converter – Step-down regulator that converts a 3 V to 65 V input to a fixed 3.3 V output at up to 300 mA. The Texas Instruments LMR36503RS3QRPERQ1 operates with adjustable switching frequency from 200 kHz to 2.2 MHz, uses peak current-mode control, and includes power-good, soft-start, overcurrent protection, and spread-spectrum control. It is housed in a 9-pin 2 × 2 mm VQFN-HR (RPE) package and is specified for −40°C to +125°C ambient operation. #TexasInstruments #LMR36503 #BuckConverter #DCDCConverter #VoltageRegulator #PowerManagement #AutomotiveElectronics #VQFN #3V3 #EmbeddedSystems

200 V N-Channel HiPerFET™ Power MOSFET – High-efficiency N-channel enhancement-mode power MOSFET designed for switch-mode power supplies (SMPS), DC-DC converters, motor drives, battery management systems, industrial automation, power inverters, and embedded power electronics. The IXYS IXFP36N20X3 is part of the HiPerFET™ Ultra X3 Series, featuring a 200 V drain-to-source voltage (VDS), 36 A continuous drain current, and 176 W maximum power dissipation, providing excellent switching performance and thermal capability. It offers a maximum RDS(on) of 45 mΩ @ VGS = 10 V, 21 nC typical gate charge, ±20 V gate-source voltage rating, and 1425 pF input capacitance, enabling fast switching with reduced conduction and switching losses. The device is avalanche rated, supports a −55°C to +150°C junction temperature range, and is housed in a TO-220-3 through-hole package for efficient heat dissipation in high-power designs. #IXYS #IXFP36N20X3 #HiPerFET #UltraX3 #PowerMOSFET #NChannelMOSFET #SMPS #DCDCConverter #MotorDrive #PowerManagement #IndustrialElectronics #EmbeddedSystems

2 A Synchronous Buck Converter – Low-noise, low-ripple DC-DC step-down regulator for converting a 3.0 V to 17 V input to an adjustable 0.8 V to 5.5 V output at up to 2 A. The Texas Instruments TPS62912RPUR operates at a selectable 1 MHz or 2.2 MHz switching frequency and supports external clock synchronization. It includes power-good, adjustable soft-start, precise enable/UVLO, output discharge, and integrated loop compensation for an optional ferrite-bead filter. The device is housed in a 10-pin 2 × 2 mm QFN package and supports a −40°C to +150°C junction temperature range. #TexasInstruments #TPS62912 #BuckConverter #DCDCConverter #VoltageRegulator #PowerManagement #LowNoise #2A #SynchronousBuck #EmbeddedSystems

RS-485 Half-Duplex Transceiver – Auto-direction RS-422/RS-485 transceiver supporting data rates up to 12 Mbps. The Texas Instruments THVD1426DRLR operates from a 3 V to 5.5 V supply, supports up to 256 bus nodes, and provides ±12 kV IEC 61000-4-2 contact ESD protection and ±16 V bus-fault protection. It features a 1/8 unit load, fail-safe receiver operation, and operates from −40°C to +125°C in an 8-pin SOT-5X3 (DRL) package. #TexasInstruments #THVD1426DRLR #RS485 #RS422 #Transceiver #HalfDuplex #IndustrialCommunication #SerialCommunication #ESDProtection #EmbeddedSystems

Silicon Carbide (SiC) Schottky Diode Array – Dual common-cathode 1200 V Silicon Carbide (SiC) Schottky rectifier optimized for solar inverters, EV chargers, UPS systems, power factor correction (PFC), industrial motor drives, and high-efficiency switch-mode power supplies (SMPS). Features a 1200 V repetitive reverse voltage, 17 A average forward current per diode (34 A total device), and 1.65 V maximum forward voltage at 5 A, delivering virtually zero reverse recovery charge for extremely low switching losses and reduced EMI. Built on Infineon's 5th Generation CoolSiC™ technology, it provides fast switching (<500 ns), excellent surge current capability (140 A), low reverse leakage current (40 µA at 1200 V), high thermal performance, and temperature-independent switching characteristics. Rated for operation over a −55°C to +175°C junction temperature range and housed in a TO-247-3 through-hole package. #Infineon #IDW10G120C5BFKSA1 #CoolSiC #SiCSchottkyDiode #SchottkyRectifier #1200V #PowerElectronics #SolarInverter #MotorDrive #PFC #SMPS #EmbeddedSystems

Pseudo Static RAM (PSRAM) – 256 Mbit (32 MB) Octal SPI/Xccela PSRAM organized as 32M × 8 or 16M × 16, supporting Octal Peripheral Interface (OPI) and HyperBus™ Interface (HPI) with DDR operation. Operates from a 1.62 V to 1.98 V supply, supports clock frequencies up to 200 MHz with up to 400 MB/s read/write throughput, and features byte-addressable memory, Data Strobe (DQS), Data Mask (DM), programmable output drive strength, and software reset. Specified for an operating temperature range of −40°C to +85°C and housed in a 24-ball mini-BGA (6 × 8 mm) package. #APMemory #APS256XXNOB9BG #PSRAM #PseudoSRAM #OctalSPI #OPI #HyperBus #Xccela #DDR #256Mbit #32MB #1_8V #BGA24 #EmbeddedMemory #EmbeddedSystems

AC-DC Enclosed PCB Power Supply Module – 90 W enclosed AC-DC power supply for industrial equipment, automation systems, instrumentation, IoT devices, and embedded power applications. Accepts a universal 85–305 VAC (120–430 VDC) input and provides a regulated 24 VDC output at 3.75 A with 90 W maximum output power. Features high efficiency up to 92%, low no-load power consumption (<0.1 W), Class II isolation, reinforced insulation, and 3 kVAC input-to-output isolation. Includes short-circuit, overload, overvoltage, and overtemperature protection, complies with IEC/UL/EN 62368-1 and IEC/EN 60335-1 safety standards, and operates over a −30°C to +70°C temperature range (with derating). Housed in a fully encapsulated PCB-mount package measuring approximately 87 × 52 × 29.5 mm. (meanwell.com) #MeanWell #IRM9024 #IRM90 #ACDCPowerSupply #PCBPowerModule #24VPowerSupply #90W #IndustrialPower #EmbeddedPower #PowerManagement #EncapsulatedPowerSupply #EmbeddedSystems

Asynchronous Communications Interface Adapter (ACIA) – Serial communication interface IC designed for 8-bit microprocessor systems, embedded computers, industrial controllers, terminals, modems, and legacy communication equipment. The Western Design Center W65C51N6TPG-14 provides a simple interface between an 8-bit CPU and serial communication devices, handling the conversion between parallel CPU data and asynchronous serial data. It operates at 5 V, supports communication speeds up to 14 MHz, and uses a 28-pin PDIP through-hole package. #WesternDesignCenter #W65C51N #W65C51N6TPG14 #ACIA #SerialCommunication #InterfaceIC #8BitProcessor #EmbeddedSystems #IndustrialElectronics #ThroughHole #PDIP28

Dual-Row Female Socket Header – 70-position dual-row female socket header for board-to-board and wire-to-board interconnection in embedded systems, industrial equipment, instrumentation, and prototyping applications. Features a 2.54 mm (0.100") pitch, through-hole PCB mounting, solder termination, forked phosphor bronze contacts, and matte tin-plated contact finish. Provides a 4.7 A current rating per contact (with two adjacent contacts powered), 465 VAC / 655 VDC voltage rating, push-pull mating, and a black liquid crystal polymer (LCP) insulator rated UL94 V-0. Operates over a −55°C to +105°C temperature range and is compatible with 0.025" (0.64 mm) square-post headers, including Samtec TSW, MTSW, TSM, TSSH, HTSS, DW, EW, and ZW series. #Samtec #SSW13502TD #SSWSeries #FemaleHeader #SocketHeader #BoardToBoard #ThroughHole #254mmPitch #DualRowConnector #PCBConnector #Interconnect #EmbeddedSystems

60 mA Charge Pump Voltage Inverter – Unregulated DC-DC converter that generates a negative output voltage from a positive input supply. The Texas Instruments TPS60403DBVR operates from 1.6 V to 5.5 V, provides up to 60 mA output current, and uses a fixed 250 kHz switching frequency. It requires three external 1 µF ceramic capacitors and integrates an active Schottky diode for startup into a load. The device is housed in a 5-pin SOT-23 (DBV) package and operates from −40°C to +85°C. #TexasInstruments #TPS60403DBVR #ChargePump #VoltageInverter #DCDCConverter #PowerManagement #SOT23 #EmbeddedSystems

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

Bluetooth Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Integrated, Chip Surface Mount #BT860SA #Ezurio #BluetoothModule #Bluetooth5 #BluetoothLowEnergy #BLE #Zigbee #Thread #nRF52840 #RFModule #WirelessModule #IoT #EmbeddedSystems #SurfaceMount #CategoryRFWireless #CategoryBluetoothModules #CategoryZigbeeThreadModules #CommonPartsLibrary

5-Position Right-Angle Surface-Mount Wire-to-Board Header – Single-row shrouded PCB header designed for consumer electronics, IoT devices, industrial controls, automotive modules, portable equipment, and embedded systems requiring compact wire-to-board connections. The JST SM05B-SHLS-TF is part of the SHL Series, featuring 5 positions on a 1.00 mm pitch with a right-angle surface-mount (SMT) configuration for high-density PCB layouts. It incorporates phosphor bronze contacts with tin plating, a 4-wall shrouded housing, and solder retention tabs to improve mechanical strength during reflow soldering. Rated for 1 A and 50 V, it uses a UL94 V-0 polyamide (PA) housing and supports push-pull mating with compatible SHL series cable connectors. Designed for −25°C to +85°C operation, it is ideal for compact embedded and portable electronic applications. #JST #SM05BSHLSTF #SHLSeries #WireToBoard #PCBHeader #SurfaceMountConnector #RightAngleConnector #1mmPitch #EmbeddedSystems #IndustrialElectronics #IoT #BoardToCable

40-Position Low-Profile Dual-Wipe SMT Socket Connector – Dual-row female socket strip designed for board-to-board interconnects, embedded computing, industrial automation, communications equipment, instrumentation, medical devices, and high-density electronic systems. Part of the Samtec Tiger Claw™ CLT Series, it features 40 contacts (2 × 20) on a 2.00 mm pitch with a surface-mount (SMT) configuration for compact PCB layouts. Utilizes phosphor bronze dual-wipe contacts with 10 µin (0.25 µm) gold plating on the mating surface and tin-plated solder tails, providing a 4.1 A current rating per contact and 280 VAC / 395 VDC voltage rating. Constructed with a black Liquid Crystal Polymer (LCP) housing (UL94 V-0), it supports 100 mating cycles, push-pull mating, and reliable operation in demanding environments. Designed for −55°C to +125°C operation, it is ideal for rugged embedded and industrial board-to-board applications. #Samtec #CLT12002LD #TigerClaw #SocketConnector #BoardToBoard #SMTConnector #DualRowConnector #2mmPitch #IndustrialElectronics #EmbeddedSystems #HighDensityInterconnect #PCBConnector