Inspection of that document returned the exact order code 2513130810102 and official Würth content. The instruction only requested an in-place update when the property was absent or blank, so the existing value was preserved. The official manufacturer URL is provided above.
Metadata audit
Table
Field
Actual
Datasheet/reference
Result
MPN
2513130810102
2513130810102
Match
Manufacturer
“Würth”
Würth Elektronik eiSos GmbH & Co. KG
Minor/incomplete
Part type
Sensors
Differential pressure sensor
Acceptable, generic
Pin count
8
8 pads
Match
Description
WSEN-PDUS ±1.0 kPa, I²C and analog, horizontal barbed ports
Same variant
Match
Package/case property
Absent
Custom WSEN-PDUS pressure-sensor package
Missing
Project datasheet URL
Populated with uploaded official PDF
Official manufacturer PDF available
Valid content; noncanonical host
Key specifications
Differential-pressure range: −1 to +1 kPa (±10 mbar)
Supply: 3.0–3.6 V, 3.3 V typical
Current consumption: 4 mA typical, 6.5 mA maximum
Interfaces: I²C and analog
Pressure resolution: 15-bit ADC
Analog output resolution: 11-bit DAC
Typical total accuracy, 0–70 °C: ±0.75% FSS
Typical absolute accuracy at 25 °C: ±0.5% FSS
Response time: 2.2 ms
Analog sensitivity: 0.757 kPa/V
Digital sensitivity: 7.63×10⁻⁵ kPa/digit
Operating temperature: −25 to +85 °C
Compensated range: 0 to 70 °C
Common-mode pressure maximum: 2.5 MPa
Differential overpressure/burst rating: 10 kPa
ESD HBM: 2 kV
MSL: 1
Mechanical drawing: 13.31 ±0.2 mm principal body dimension; drawing also specifies 12.01 mm, 8.0 mm body width, Ø2.2/Ø2.7 mm port features and 6.5° port geometry. The commonly quoted 13.3 × 11.6 mm description is not a complete substitute for the dimensioned drawing.
Individual pin verification
Table
Pad
Actual symbol label
Expected function
Actual properties
Assessment
1
SCL
I²C serial clock, Input
Pin Type=Unspecified; no description/group
Number/function correct
2
SDA
I²C serial data, Input/Output
Unspecified; no description/group
Number/function correct
3
GND
Negative supply, Supply/Ground
Unspecified; no description/group
Number/function correct
4
VOUT
Analog output, Output
Unspecified; no description/group
Number/function correct
5
VDD
Positive supply, Supply/Power In
Unspecified; no description/group
Number/function correct
6
NC
No Connection
Unspecified; no description/group
Correctly distinguished as NC
7
RSVD_1
Reserved
Unspecified; no description/group
Functionally reserved; label differs
8
RSVD_2
Reserved
Unspecified; no description/group
Functionally reserved; label differs
Pins 6–8 are not functional I/O: pin 6 is NC; pins 7 and 8 are reserved.
Symbol audit
Custom symbol body: rectangle 219 × 119 symbol units
Pins are arranged logically:
Left: SCL, SDA, GND, VOUT
Right: RSVD_2, RSVD_1, NC, VDD
All eight pin numbers appear and match the footprint.
Symbol labels include both number and name.
Symbol contains a visible “MAIN” label.
All terminals lack electrical types, descriptions, groups, sections, orientations and terminal-order metadata.
No datasheet-defined symbol outline exists, so body dimensions are stylistic rather than mechanically verifiable.
Footprint auditPads
All eight pads match the official recommended land pattern:
SMD rectangular pads
Copper/paste/mask on the top side in the source footprint
Nominal pad dimensions: 1.0 × 2.1 mm, rotated 90°, giving a physical land extent of 2.1 mm horizontally and 1.0 mm vertically
No drilled holes
Pad centers in millimetres:
Table
Pad
X
Y
1
−5.630
−2.285
2
−5.630
−0.760
3
−5.630
+0.760
4
−5.630
+2.285
5
+5.630
+2.285
6
+5.630
+0.760
7
+5.630
−0.760
8
+5.630
−2.285
These implement the datasheet’s 1.52 mm pitch, 1.0 × 2.1 mm lands, 9.16 mm inner-row separation, and 4.57 mm row span within normal rounding.
Outline/courtyard
Fabrication body outline: 13.31 × 8.0 mm
Port graphics extend to approximately Y=7.6 mm
Imported courtyard rectangle: X ±7.68 mm, Y −5.0 to +8.6 mm
Pin-1 marker exists near pad 1.
A STEP model and imported KiCad footprint are present.
Mismatches and severity
High — Datasheet keepout missing
The official recommended land pattern requires a central area with “no metal, open traces or vias.” No actual copper/routing keepout node or rule was found.
High — Courtyard geometry appears mapped into the silkscreen asset
The source footprint defines the ±7.68 mm courtyard on F.CrtYd, but the rendered Flux Silk Shapes asset contains that rectangle and no separate courtyard-layer node was found. This can print an unintended large silkscreen box while failing to provide a usable courtyard.
Medium — All terminal electrical types are Unspecified
Expected: SCL Input; SDA bidirectional; GND Ground/Power; VOUT Output; VDD Power In; pin 6 Not Connected; pins 7–8 Reserved.
Medium — Pin descriptions and groups are absent
None of the eight pins has the datasheet description. I²C grouping for SCL/SDA and power grouping for VDD/GND are also absent.
Medium — Reserved labels are noncanonical
Actual labels are RSVD_1 and RSVD_2; the datasheet labels both pins simply RSVD. Pin numbers remain correct, so there is no electrical swap.
Medium — Package/case metadata missing
No Package or Case Code property documents the custom WSEN-PDUS horizontal-barbed package.
Medium — Footprint text import is questionable
Reference/value text occupy the same position, and Flux reports 1.27 mm stroke width as well as 1.27 mm font size. This is likely an import mapping error and may make text unusable or overlapping.
Low — Manufacturer name abbreviated
Actual: “Würth.” Expected canonical manufacturer: “Würth Elektronik eiSos GmbH & Co. KG.”
Low — Generic symbol annotation
The visible “MAIN” label is not a datasheet-defined device label and adds little identification value.
No pad-number, pad-position, pad-size, pinout, MPN, pressure-range, interface, or port-orientation mismatch was found.
Audit complete. The MPN, variant, 8-pin mapping, and pad geometry match the official Würth datasheet; the existing Datasheet property already contains the official document, so it was left unchanged.
Key issues: missing central copper/via keepout, courtyard incorrectly included in silkscreen, unspecified pin electrical types/descriptions, and missing package metadata. Full results: Part Audit — WSEN-PDUS 2513130810102.