Advanced Full-Bridge Motor Driver IC – 75 V high-current full-bridge motor driver with integrated power MOSFETs for brushed DC, brushless DC (BLDC), and bipolar stepper motor control. Operates from a 7 V to 75 V supply, delivers up to 6 A continuous output current, and features two integrated half-bridges with PWM and logic control inputs. Includes an integrated charge pump for 100% duty-cycle operation, current-sense amplifier, programmable current limiting, adjustable slew-rate control, open-load detection, undervoltage lockout (UVLO), overcurrent protection, and thermal shutdown. Designed for motor applications up to 500 W, operates over a −40°C to +150°C junction temperature range, and is housed in a 55-pin VFQFPN (9 × 7 mm) package. #STMicroelectronics #STSPIN9P23TR #MotorDriver #FullBridgeDriver #HBridge #BLDC #BrushedDC #StepperMotor #PowerMOSFET #PWM #CurrentSense #MotorControl #EmbeddedSystems

Ambient Light Sensor with I²C Digital Output – Ultra-low-power digital ambient light sensor designed for smartphones, tablets, LCD/OLED backlight control, IoT devices, smart home products, industrial automation, consumer electronics, and embedded light-sensing applications. The ROHM BH1750FVI-TR measures ambient light over a 1 lx to 65,535 lx range with 1 lx resolution and provides direct lux readings through an I²C interface, eliminating the need for complex optical calculations. It features 16-bit measurement resolution, high sensitivity to visible light, 50 Hz/60 Hz light-noise rejection, and programmable measurement modes (continuous and one-time). Operating from a 2.4 V to 3.6 V supply, it consumes only 120 µA typical during measurement and 0.01 µA typical in power-down mode, making it ideal for battery-powered systems. Packaged in a compact 6-pin SMD (SOP-6) package, it operates over a −40°C to +85°C temperature range. #ROHM #BH1750FVITR #BH1750 #AmbientLightSensor #LightSensor #DigitalSensor #I2C #BacklightControl #IoT #LowPower #EmbeddedSystems

eFuse / Electronic Fuse IC – 60 V electronic fuse with integrated input and output reverse-polarity protection for overcurrent and power-path protection. The Texas Instruments TPS26624DRCT supports 4.5 V to 60 V input voltage and 0.025 A to 0.88 A adjustable current limiting, with ±5% current-limit accuracy. It features a 478 mΩ typical on-resistance and is housed in a 10-pin VSON (3 × 3 mm) package, operating from −40°C to +125°C. #TexasInstruments #TPS26624DRCT #eFuse #ElectronicFuse #CircuitProtection #OvercurrentProtection #ReversePolarityProtection #PowerManagement #60V #EmbeddedSystems

Ultra-Low Phase Noise HCMOS Crystal Oscillator – 3.3 V HCMOS crystal clock oscillator optimized for high-definition audio equipment, DACs, ADCs, digital audio broadcasting (DAB), professional audio systems, precision instrumentation, and embedded timing applications. Provides a 22.5792 MHz output frequency with ±25 ppm frequency stability, operating from a 3.3 V ±0.3 V supply while consuming 15 mA typical (25 mA maximum). Features ultra-low phase noise of −100 dBc/Hz typical at 10 Hz offset, a −169 dBc/Hz noise floor, HCMOS output, enable/disable (standby) function with tri-state output, 200 ns maximum disable time, 3 ns maximum rise/fall time, and ±24 mA output drive for high-performance clock generation. Designed for surface-mount assembly in a 4-pad 14.2 × 9.14 mm package, it operates over a 0°C to +70°C temperature range. #Crystek #CCHD95725225792 #CCHD957 #CrystalOscillator #HCMOSOscillator #LowPhaseNoise #ClockGenerator #AudioClock #PrecisionTiming #SurfaceMount #EmbeddedSystems

2-Position Wire-to-Board PCB Header – Through-hole male header designed for power and wire-to-board connections. The Hirose DF63M-2P-3.96DSA features 2 positions on a 3.96 mm pitch, with a shrouded, single-row vertical configuration and solder termination. It is rated for 14 A and 630 V AC/DC, with 10 mΩ maximum contact resistance and 1500 V maximum withstand voltage. The connector uses brass contacts, a glass-filled PBT insulator, and operates from −55°C to +105°C. #Hirose #DF63M #DF63 #PCBHeader #WireToBoard #TerminalConnector #ThroughHole #PowerConnector #396mmPitch #EmbeddedSystems #IndustrialElectronics

Dual 4-to-1 Data Selector/Multiplexer – Dual independent 4-channel to 1-channel data selector/multiplexer with common address select inputs and individual active-low enable (strobe) inputs. Operates from a 2 V to 6 V supply, features typical 9 ns propagation delay, ±6 mA output drive at 5 V, CMOS-compatible inputs, and supports parallel-to-serial data conversion and cascading. Housed in a 16-pin PDIP package and specified for an operating temperature range of −40°C to +85°C. #TexasInstruments #SN74HC153N #SN74HC153 #Multiplexer #DataSelector #DualMultiplexer #4To1Multiplexer #CMOSLogic #DigitalLogic #ParallelToSerial #PDIP16 #EmbeddedSystems

Dip Switch SPST 8 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC A6SN-8104 is an 8-position surface-mount DIP slide switch from Omron, designed for manual configuration and address selection in electronic circuits. It features a raised slide actuator with SPST contacts, making it ideal for setting operating modes, device addresses, calibration options, and other user-selectable functions in industrial, communication, and embedded systems. The switch offers high contact reliability through Omron's knife-edge contact mechanism and supports automated PCB assembly with gull-wing terminals. Key Features 8-position SPST DIP slide switch Surface-mount (SMT) package with gull-wing terminals Raised slide actuator for easy manual operation Rated for 25 mA at 24 VDC High-reliability knife-edge contact mechanism 2.54 mm (0.100") switch pitch Washable construction for PCB cleaning processes Operating temperature: -30°C to +85°C Compact design suitable for automated assembly Commonly used for configuration, addressing, and mode selection on PCBs #Omron #DIPSwitch #SlideSwitch #SPST #SurfaceMount #SMT #ConfigurationSwitch #EmbeddedSystems #IndustrialElectronics #PCBComponents

5-Position DIP Switch – 5-position SPST slide DIP switch for manual configuration and logic selection, rated for 25 mA at 24 VDC. Features surface-mount gull-wing terminals with 2.54 mm pitch, raised slide actuators, gold-plated beryllium copper contacts, and a polyphenylene sulfide (PPS) housing. Specified for an operating temperature range of −40°C to +85°C with 1,000 mechanical and electrical cycles. #CKSwitches #SDA05H1SBD #DIPSwitch #SlideSwitch #SPST #5Position #SurfaceMount #GullWing #2_54mmPitch #ConfigurationSwitch #EmbeddedSystems

8-Bit Microcontroller – Microchip PIC18F4620-I/PT is an 8-bit PIC microcontroller with 64 KB Flash program memory, 3.8 KB RAM, and 1 KB EEPROM, operating at up to 40 MHz. It includes 36 I/O pins, a 10-bit ADC with 13 channels, I²C, SPI, and EUSART interfaces, plus timers, PWM, watchdog, brown-out reset, and analog comparators. The device operates from 4.2 V to 5.5 V for this specific I/PT variant and is housed in a 44-pin TQFP (10 × 10 mm) package. #Microchip #PIC18F4620 #Microcontroller #PIC18 #8BitMCU #FlashMCU #ADC #I2C #SPI #UART #EmbeddedSystems #TQFP

CMOS Crystal Clock Oscillator – 50 MHz CMOS clock oscillator for precision timing and clock generation. Operates from a 5.0 V ±10% supply, features ±50 ppm frequency stability, CMOS/TTL compatible output, 50 mA maximum supply current, 5 ns maximum rise/fall time, 40/60% maximum duty cycle, and 10 ms maximum startup time. Includes an enable/disable (standby) control input with high-impedance output when disabled, operates over a 0°C to +70°C temperature range, and is housed in a 7.0 × 5.0 mm surface-mount ceramic package. #IQD #LFSPXO018035 #CrystalOscillator #CMOSOscillator #ClockOscillator #50MHz #CMOS #TTLCompatible #FrequencyReference #TimingDevice #SurfaceMount #EmbeddedSystems

eFuse Power Protection IC – Electronic fuse for load protection and power management, providing 2.7 V to 18 V input operation, 0.5 A to 4 A adjustable current limiting, and 34 mΩ typical on-resistance. The Texas Instruments TPS259573DSGR includes fast overvoltage protection, adjustable overvoltage lockout (OVLO), undervoltage protection, overtemperature protection, adjustable output slew rate, and a fault indication output. It is specified for −40°C to +125°C operation and uses an 8-pin WSON (2 × 2 mm) package. #TexasInstruments #TPS259573DSGR #eFuse #PowerProtection #CurrentLimit #OvervoltageProtection #PowerManagement #PMIC #WSON #EmbeddedSystems

2 Gbit NOR Flash Memory IC – Non-volatile memory with 256M × 8 organization, supporting SPI Quad I/O with DTR at up to 166 MHz. It operates from 2.7 V to 3.6 V, with 40 ms word write and 1.5 ms page write times. The device is housed in a 24-CSPBGA (6 × 8 mm) package and operates from −40°C to +85°C. #Macronix #MX66L2G45GXRI00 #NORFlash #FlashMemory #SPI #QuadSPI #DTR #2Gbit #MemoryIC #EmbeddedSystems #Storage

FFC/FPC Connector – 30-position right-angle FFC/FPC connector with 1.00 mm pitch for board-to-cable interconnection. Features bottom contacts, Zero Insertion Force (ZIF) slider actuator, surface-mount solder termination, 0.5 A current rating per contact, 50 V voltage rating, and 3.00 mm mated height. Includes gold-plated phosphor bronze contacts, tin-plated solder tails, nylon housing, solder retention, and supports up to 30 mating cycles. Specified for operation over a −40°C to +85°C temperature range with a UL94 V-0 flammability-rated housing. #Molex #0522713069 #EasyOn #FFCConnector #FPCConnector #ZIFConnector #30Position #1_0mmPitch #BottomContact #SurfaceMount #BoardToCable #EmbeddedSystems

M8 Circular Connector – 4-position female panel-mount circular connector for industrial signal interconnection. Features through-hole solder termination, straight orientation, threaded coupling, shielded metal shell, IP67 ingress protection, 3 A current rating, 30 VAC operating voltage, and gold-plated socket contacts. Includes a copper alloy shell with nickel plating, board lock, keyed polarization (A-code), and operates over a −40°C to +85°C temperature range. Designed for panel and PCB mounting in automation, industrial, and telecommunications applications. #TEConnectivity #AMP #T4041037041000 #M8Connector #CircularConnector #PanelMount #4Position #FemaleConnector #ShieldedConnector #IP67 #ThroughHole #IndustrialConnector #EmbeddedSystems

8-Channel High-Side Source Driver Array – High-voltage, high-current source driver IC designed for LED and lamp driving, relay control, solenoid driving, industrial automation, printers, automotive electronics, PLCs, and embedded control systems. The Allegro UDN2981A integrates eight non-inverting high-side Darlington transistor outputs, allowing direct interfacing between TTL/CMOS logic and higher-voltage loads. Each output can source up to 500 mA, with an output voltage capability of up to 50 V, making it ideal for driving inductive and resistive loads. Features integrated input resistors, output clamp diodes for inductive load protection, and TTL/5 V CMOS-compatible inputs, simplifying circuit design and reducing external component count. Operates from a 4.75 V to 15 V logic supply, over a −20°C to +85°C temperature range, and is housed in an 18-pin DIP (through-hole) package for easy PCB integration. #Allegro #UDN2981A #HighSideDriver #SourceDriver #DarlingtonArray #RelayDriver #SolenoidDriver #LEDDriver #IndustrialAutomation #EmbeddedSystems #PowerDriver #TTLCompatible

Serial EEPROM providing 2 Kbit (256 × 8) nonvolatile memory with an I²C-compatible two-wire interface for data storage and system configuration. It operates from 1.7 V to 5.5 V, supports Standard (100 kHz), Fast (400 kHz), and Fast-mode Plus (1 MHz) I²C communication, features 16-byte page write, and is housed in an 8-pin SOIC package. #SerialEEPROM #EEPROM #I2C #NonvolatileMemory #2Kbit #Microchip #SOIC8 #EmbeddedSystems

Digital Potentiometer – Single-channel 10 kΩ digital potentiometer with 257 wiper positions (8-bit resolution) and SPI-compatible serial interface. Operates from a 1.8 V to 5.5 V supply and features 75 Ω typical wiper resistance, ±20% end-to-end resistance tolerance, 150 ppm/°C typical temperature coefficient, and volatile wiper memory. Specified for an operating temperature range of −40°C to +125°C and housed in an 8-pin SOIC package. #Microchip #MCP4151 #MCP4151103ESN #DigitalPotentiometer #DigitalPot #SPI #10kOhm #257Taps #8Bit #VariableResistor #SOIC8 #EmbeddedSystems

Isolated DC-DC Converter Module – 100 W regulated isolated DC-DC converter for industrial automation, railway systems, telecommunications, networking equipment, and embedded power applications. Accepts a 16.5 V to 74 V DC input (4:1 input range) and provides a regulated 5 V DC output at 20 A, delivering 100 W maximum output power. Features 3 kVDC input-to-output isolation, up to 93.5% efficiency, adjustable output voltage, remote ON/OFF control (positive logic), remote sense, and comprehensive protection including input undervoltage lockout (UVLO), overcurrent, overvoltage, overtemperature, and continuous short-circuit protection. Designed in an industry-standard 1/8-brick through-hole package (62.2 × 26.6 × 12.7 mm), it operates over a −40°C to +105°C temperature range (with derating) and is certified to UL/IEC/EN 62368-1, CE, UKCA, and cURus standards. #BelPowerSolutions #PRA10048S5 #PRA100Series #DCDCConverter #IsolatedPower #100WConverter #5V20A #PowerModule #IndustrialPower #RailwayElectronics #EmbeddedPower #EmbeddedSystems

12.288 MHz Temperature-Compensated Crystal Oscillator (TCXO) – High-stability HCMOS TCXO designed for wireless communications, GPS/GNSS receivers, audio systems, networking equipment, industrial automation, embedded controllers, and precision timing applications. Part of the ECS-TXO-5032 Series, it provides a 12.288 MHz output frequency with ±2.5 ppm frequency stability over temperature and ±1.5 ppm initial frequency tolerance for highly accurate clock generation. Operates from a 3.3 V supply with 6 mA maximum current consumption and features an HCMOS output, 10 ns maximum rise/fall time, 2 ms typical startup time, and −135 dBc/Hz phase noise at 1 kHz offset. Packaged in a compact 5.0 × 3.2 mm 4-pad SMD package, it is specified for operation over a −30°C to +85°C temperature range, making it ideal for precision embedded and RF timing applications. #ECSInc #ECSTXO50321228TR #TCXO #TemperatureCompensatedCrystalOscillator #12288MHz #HCMOS #PrecisionTiming #GPS #GNSS #WirelessCommunication #IndustrialElectronics #EmbeddedSystems

Low-Dropout (LDO) Voltage Regulator – Fixed 5.0 V positive-output LDO regulator providing up to 250 mA output current for low-power voltage regulation. Operates from a 2.7 V to 13.2 V input voltage, features 2 µA typical quiescent current, 625 mV typical dropout voltage at 250 mA, ±2% output voltage accuracy, and 44 dB typical PSRR at 100 Hz. Includes overcurrent protection, short-circuit protection, and overtemperature shutdown. Specified for operation over a −40°C to +125°C temperature range and housed in a 3-pin SOT-89 package. #Microchip #MCP1702T5002EMB #MCP1702 #LDO #VoltageRegulator #LowDropout #5V #250mA #LowPower #PowerManagement #SOT89 #EmbeddedSystems