Part Review Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol/footprint/pin descriptions against the datasheet and update the Datasheet property if it’s missing.
Created a project doc

Part Review Report: LFSPXO018035Bulk

View Document
Reviewed available part information in the Flux project and cross-checked it against the configured datasheet for the IQD LFSPXO018035Bulk /...

flux

Completed the part review and created the detailed report here: Part Review Report: LFSPXO018035Bulk.
Open items:
  • Datasheet URL was already set to the official IQD URL, so no property update was needed.
  • No hard symbol or footprint mismatch found.
  • Minor quality flags: pin types are Unspecified, pin descriptions are missing, and the Bulk MPN appears obsolete with new part number LFSPXO018035.
Suggested next steps:
  1. Update terminal pin types and pin descriptions.
  2. Add lifecycle/obsolete status metadata if sourcing matters.
  3. Re-publish the cleaned-up part after metadata fixes.
Fix metadata and verify
Update pin metadata
Add lifecycle note
Run final review
Export part data
Sign up to send

Files

Pins

Symbol

Layout

3D View

STANDBY_OPERATION
Pin Number
1
+VS
Pin Number
4
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
STANDBY_OPERATION
1
Unspecified
GND
2
Unspecified
OUTPUT
3
Unspecified
+VS
4
Unspecified

LFSPXO018035