Fuse Holder 10A 250V 1 Circuit Cartridge Through Hole PCB Fuse Holder for 5 × 20 mm cartridge fuses, designed for through-hole PCB mounting. The Eaton BK/H15-V-1 supports a maximum voltage rating of 250 V AC and a current rating of 15 A, providing a secure fuse mounting interface for circuit protection applications. #PCBComponent #FuseHolder #ThroughHole #CartridgeFuse #Eaton #CircuitProtection

Current Sensor 50A 1 Channel Open Loop Bidirectional Module Closed-loop Hall effect current sensor designed for isolated measurement of DC, AC, and pulsed currents. The LEM HOB 50-P provides a nominal primary current measurement range of ±50 A, with a 5 V supply voltage, voltage output interface, and galvanic isolation between primary and secondary circuits. It is designed for PCB mounting applications requiring accurate current sensing. #CurrentSensor #HallEffectSensor #LEM #ClosedLoopSensor #PowerElectronics #PCBComponent

20 Hz ~ 10 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.6 V Omnidirectional (-38dB ±1dB) Solder Pads Microphone, Electret Condenser Microphone (ECM) for audio signal capture with an omnidirectional pickup pattern and analog output. The CMM-2718AT-3817NC-TR features a 27 mm × 18 mm × 9.7 mm package, operating voltage of 1.5 V to 10 V, sensitivity of -38 ±3 dB, and frequency response of 100 Hz to 10 kHz. #Microphone #ElectretCondenserMicrophone #AudioComponent #ECM #PCBComponent

Buck Regulator Positive Output Step-Down DC-DC Controller IC 12-TDFN (3x3) Automotive Synchronous Buck Converter: MAX25231ATCB/V+ is a high-efficiency synchronous step-down converter designed for automotive applications, operating from a 4.5V to 36V input supply and providing up to 2A output current. It integrates a 2.1MHz switching frequency, forced-PWM mode, and is housed in a 12-pin 3mm × 3mm TDFN package. #Automotive #SynchronousBuckConverter #StepDownConverter #PowerManagement #AnalogDevices #MaximIntegrated #PCBComponent

Model aircraft plug Power Connectors RoHS DC power connector designed for secure connection and power transfer in DC applications. The XT60H-M features a 2-position male bullet connector with a rated voltage of 500V DC and rated current of 30A, using a nylon housing with gold-plated copper alloy contacts. It is suitable for wire-to-wire power connections with a 5.0mm contact diameter. #PowerConnector #DCConnector #BulletConnector #XT60H-M #Amass #PCBComponent

Connector Header Surface Mount, Right Angle 8 position 0.039" (1.00mm) SMT wire-to-board connector designed for electrical connection between PCB and wire harness in the JST SR/SZ series. It features an 8-circuit, 1.0 mm pitch side-entry SMT header with a 50 V AC/DC voltage rating, 0.7 A AC/DC current rating, and an operating temperature range of -25°C to +85°C. #Connector #WireToBoard #SMT #JST #1mmPitch #PCBComponent

6 x 6 mm, 4.3 mm Actuator Height Off PCB, 260 gf, Black, Surface Mount, SPST, Tactile Switch Tactile Switch providing momentary push-button switching for electronic control applications. The TS04-66-43-BK-260-SMT features a surface-mount design, 6.0 mm × 6.0 mm actuator size, 4.3 mm height, SPST normally open contact configuration, and a rated contact rating of 50 mA at 12 VDC. #TactileSwitch #PushButtonSwitch #SMTComponent #PCBComponent #CUIDevices #SameSkyDevices

Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-PICOSTAR (0.76x0.76) Digital Temperature Sensor — measures temperature using a high-accuracy digital sensing element with an I²C-compatible interface. The TMP114AIYMTR operates from a 1.7 V to 5.5 V supply, provides 16-bit temperature resolution, and supports a temperature range of −40°C to +125°C in a small 6-pin SOT-23 package. #TemperatureSensor #DigitalSensor #I2C #PCBComponent #TexasInstruments #TMP114AIYMTR

Power Connector Receptacle, Female Sockets NEMA 5-15R Panel Mount, Snap-In AC Power Receptacle, IEC C14 inlet connector designed for PCB or panel mounting applications. It features a 3-position IEC 60320 C14 interface with a rated voltage of 250 VAC and current rating of 10 A. The receptacle is designed for use with standard C13 power cords and is available with a 0.250 inch quick disconnect terminal configuration. #ACReceptacle #IECConnector #C14Inlet #PowerConnector #PCBComponent

Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) Unshielded RJ45 Modular Jack — Provides an 8-position, 8-contact (8P8C) Ethernet interface connector with integrated magnetics for PCB mounting. The RJHSE5081 features a through-hole design, supports 10/100 Base-T Ethernet applications, and includes shielded construction with LED indicators as specified in the manufacturer datasheet. #AmphenolICC #RJHSE5081 #RJ45Connector #EthernetConnector #ModularJack #PCBComponent

Power Connectors RoHS Battery Connector — High-current polarized power connector designed for secure DC power connections. The XT90PB-F.G.Y features a female bullet terminal configuration with a rated voltage of 500V DC and rated current of 90A, suitable for power connection applications requiring high current handling. #Connector #PowerConnector #BatteryConnector #DCConnector #XT90 #Amass #PCBComponent #CommonPartsLibrary #plug #XT90PB

Intelligent RGB LED, a single-pixel addressable LED device integrating control circuit and RGB light-emitting components. The SK6805-EC15 operates at 3.7–5.5V supply voltage, supports single-wire data communication, provides 256-level PWM grayscale control for each RGB channel, and is housed in a 1.5mm × 1.5mm package. #LED #RGBLED #AddressableLED #SK6805 #Optoelectronics #PCBComponent

Decoder/Demultiplexer 1 x 3:8 16-TSSOP 3-to-8 Line Decoder/Demultiplexer designed to decode three binary input lines into one of eight active-low outputs. The SN74HC138PWR operates with a 2 V to 6 V supply voltage and features three enable inputs for operation control. It is available in a 16-pin TSSOP package and provides high-speed CMOS logic performance. #LogicIC #Decoder #Demultiplexer #CMOS #TexasInstruments #SN74HC138PWR #PCBComponent #IntegratedCircuit