Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll audit the part metadata and existing symbol/footprint, locate the official manufacturer datasheet if needed, update the Datasheet property, then report verified specs and any mismatches.
Thought for 51 sec
I’m reading the complete symbol and pad definitions now, including all stored properties, before comparing them to manufacturer data.
Worked for 6 mins 35 sec
Created a project doc
Part Datasheet Audit
Part Datasheet Audit
Scope
Audit of the Taoglas WLA.01 part metadata, schematic symbol, and footprint against the official Taoglas datasheet.
Authoritative sources
- Official datasheet: https://www.taoglas.com/datasheets/WLA.01.pdf
- Official product page: https://www.taoglas.com/product/wla-01-2-42-5ghz-ceramic-loop-antenna-3-21-60-5mm-linear-polarized/
- Datasheet revision reviewed: SPE-11-8-146-V, revision V, dated 2024-02-01.
Note: the current Taoglas product webpage contains legacy/marketing values including 2.5 dBi and VSWR 1.5:1, while revision-V PDF reports 1.0 dBi typical and VSWR <2 for the documented reference board. Use the revision-V PDF values for controlled engineering documentation.
Audit complete. The main issues are an incorrect Part Type (“Integrated Circuits”), missing package/description, and symbol pins 4–5 being ordinary unspecified terminals despite being non-functional mechanical lands. The footprint otherwise broadly matches the 3.2 × 1.6 × 0.5 mm package.
The Datasheet property was not changed because it was already populated, although it points to Digi-Key rather than the official Taoglas PDF. Full specifications and findings are in Part Datasheet Audit.
Correct metadata and terminals
Use official datasheet
Verify pad two
Add RF integration notes
