Part Datasheet Audit
Thought for 51 sec
I’m reading the complete symbol and pad definitions now, including all stored properties, before comparing them to manufacturer data.
Worked for 6 mins 35 sec
Created a project doc
Part Datasheet Audit
Part Datasheet Audit
Scope
Audit of the Taoglas WLA.01 part metadata, schematic symbol, and footprint against the official Taoglas datasheet.
Authoritative sources
- Official datasheet: https://www.taoglas.com/datasheets/WLA.01.pdf
- Official product page: https://www.taoglas.com/product/wla-01-2-42-5ghz-ceramic-loop-antenna-3-21-60-5mm-linear-polarized/
- Datasheet revision reviewed: SPE-11-8-146-V, revision V, dated 2024-02-01.
Note: the current Taoglas product webpage contains legacy/marketing values including 2.5 dBi and VSWR 1.5:1, while revision-V PDF reports 1.0 dBi typical and VSWR <2 for the documented reference board. Use the revision-V PDF values for controlled engineering documentation.
Audit complete. The main issues are an incorrect Part Type (“Integrated Circuits”), missing package/description, and symbol pins 4–5 being ordinary unspecified terminals despite being non-functional mechanical lands. The footprint otherwise broadly matches the 3.2 × 1.6 × 0.5 mm package.
The Datasheet property was not changed because it was already populated, although it points to Digi-Key rather than the official Taoglas PDF. Full specifications and findings are in Part Datasheet Audit.
Correct metadata and terminals
Use official datasheet
Verify pad two
Add RF integration notes
