Datasheet Part Audit

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

Thought for 9 sec

flux

I’ll audit the part metadata, source the official TI datasheet if needed, then verify the symbol, footprint, and pin descriptions against it and update the Datasheet property.

Thought for 14 sec

flux

I’m reading the current metadata and terminal/footprint definitions first; then I’ll compare each item to the official datasheet.

Worked for 2 mins 1 sec

flux

Audit complete. TMUX4053PWR, Texas Instruments, active-production 16-pin PW TSSOP, is correctly identified; the existing Datasheet URL is valid and readable, so it was not replaced. Pin names/numbers and the 0.65 mm-pitch footprint match the datasheet land pattern.

Key specs: 5–24 V single supply or up to ±12 V dual supply; −55°C to +125°C; 60 Ω typical on-resistance, 240 Ω maximum at 24 V/25°C; 850 MHz typical bandwidth at 24 V; 1.8 V-compatible logic; break-before-make.
Mismatches: all 16 symbol pins have Pin Type=Unspecified, no Pin Description, and no parametric Section/Pin Group/orientation/order metadata. The project description also presents 850 MHz and 240 Ω without their supply/test-condition context and calls 110 ns a maximum turn-on time, although it is typical at 24 V/25°C and up to 230 ns over temperature.

Fix metadata and review

Fix pin metadata

Organize symbol pins

Correct description wording

Run part review

Files

Pins

Symbol

Layout

Preview

TMUX4053PWR