Pin Function Grouping

A

adrian95

Make section property as Pin Group

flux

Updated all pins so their Section property now matches their Pin Group.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll assign section-level order with Power at 1 and Ground at 10, alternate the remaining groups between Left and Right, and preserve Top/Bottom for the supply pins. Since there are nine groups, order 9 will remain intentionally unused.

flux

Assigned and verified:
  • 1 Power — Top
  • 2 Internal Regulator — Left
  • 3 Reset — Right
  • 4 Clock — Left
  • 5 Port A — Right
  • 6 Port B — Left
  • 7 Port C — Right
  • 8 Port D — Left
  • 9 — unused
  • 10 Ground — Bottom
Verify symbol layout
Set pin electrical types
Check datasheet pinout
Add terminal descriptions
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet