I’ll review the part metadata, find and attach the official datasheet if needed, then compare symbol/footprint/pin descriptions against it and summarize any mismatches.

The part already has an ST datasheet URL set, so I’m using that as the reference and moving straight into pin/package verification.

The pin-number/name mapping matches the ST UFQFPN48 pinout overall; I’m documenting the metadata and footprint issues I found so the detailed comparison stays in the project files.

Review complete. The datasheet URL was already set to the official ST datasheet, so no Datasheet property update was needed; I created the detailed findings in Part Review Report: STM32WL55CCU6.

Key results: the 49-pin symbol/pin-number mapping matches the ST UFQFPN48 pinout, but metadata has issues: package is incorrectly set to TO, all pin types are Unspecified, pin descriptions are missing, logic metadata appears wrong, and the footprint looks like a generic QFN pattern rather than the exact ST recommended UFQFPN48 land pattern. Suggested next step: ask me to apply the metadata/pin-description/footprint corrections.