Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.
I’ll apply this to the current STM32G051K8T6 part: classify pins into datasheet-backed sections, remove Pin Group, assign balanced left/right orientations and terminal order, while preserving every pin number and mapping.
Updated the STM32G051K8T6 symbol directly: all 32 pins retain their original numbering and mapping, with datasheet-backed sections, balanced orientations, unique terminal order, and no Pin Group properties. The official ST datasheet URL and pin descriptions/types were also added; the full findings are in STM32G051K8T6 Part Audit.
No pinout or mapping mismatches found.
Footprint matches LQFP32; pads are slightly larger than ST’s example land pattern, but remain a plausible alternate geometry.