Part Datasheet Review and Validation
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 6 sec
I’ll review the part metadata, find/update the official datasheet URL if needed, then cross-check symbol, footprint, and pin descriptions against the datasheet.
Worked for 53 sec
The part already has an ST datasheet URL set, so I’m using that as the source of truth and moving into pin/footprint verification.
Worked for 3 mins 47 sec
Completed the STM32F107RCT6 part review. The official ST datasheet was already set, and the 64-pin symbol plus LQFP64 footprint check out against the datasheet.
Open items:
- Metadata mismatches flagged: library package metadata says
32-LQFP, subtype/logic saysLogic/AND, andMount: Baseshould be SMD/surface-mount. - Suggested refinement: add limited-drive notes for PC13/PC14/PC15.
Full details are in Part Review and Datasheet Validation: STM32F107RCT6.
Fix metadata and review
Fix metadata mismatches
Refine backup pins
Run ERC DRC
Check BOM classification
Name
Pin #
Type
Part Type
Pin Description
Pin Orientation
VBAT
1
Power In
Terminal
Backup battery supply for RTC and backup registers
Top
PC13-TAMPER-RTC
2
Bi-Directional
Terminal
GPIO PC13; TAMPER-RTC alternate function; low-drive backup-domain I/O
PC14-OSC32_IN
3
Bi-Directional
Terminal
GPIO PC14; 32.768 kHz low-speed oscillator input OSC32_IN
PC15-OSC32_OUT
4
Bi-Directional
Terminal
GPIO PC15; 32.768 kHz low-speed oscillator output OSC32_OUT
OSC_IN
5
Input
Terminal
High-speed external oscillator input OSC_IN; PD0 function available by software remap
OSC_OUT
6
Output
Terminal
High-speed external oscillator output OSC_OUT; PD1 function available by software remap
NRST
7
Bi-Directional
Terminal
Active-low reset input/output
PC0
8
Bi-Directional
Terminal
GPIO PC0; ADC12_IN10 alternate function
PC1
9
Bi-Directional
Terminal
GPIO PC1; ADC12_IN11, ETH_MII_MDC, ETH_RMII_MDC alternate functions
PC2
10
Bi-Directional
Terminal
GPIO PC2; ADC12_IN12, ETH_MII_TXD2 alternate functions
PC3
11
Bi-Directional
Terminal
GPIO PC3; ADC12_IN13, ETH_MII_TX_CLK alternate functions
VSSA
12
Ground
Terminal
Analog ground supply
Bottom
VDDA
13
Power In
Terminal
Analog power supply
Top
PA0-WKUP
14
Bi-Directional
Terminal
GPIO PA0 wakeup; USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, ETH_MII_CRS_WKUP
PA1
15
Bi-Directional
Terminal
GPIO PA1; USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, ETH_MII_RX_CLK, ETH_RMII_REF_CLK
PA2
16
Bi-Directional
Terminal
GPIO PA2; USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3, ETH_MII_MDIO, ETH_RMII_MDIO
PA3
17
Bi-Directional
Terminal
GPIO PA3; USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4, ETH_MII_COL
VSS_4
18
Ground
Terminal
Digital ground supply VSS_4
Bottom
STM32F107RCT6
