Part Audit Review

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official Samtec datasheet if needed, then verify the symbol pins and footprint geometry against it and record any mismatches.
Created a project doc

Part Audit Report — SSW-112-01-G-S

View Document
Reviewed available part metadata, the 12-terminal schematic symbol, PCB footprint, and the official Samtec documentation for SSW-112-01-G-S....

flux

Audit complete. The MPN, manufacturer, 12-pin count, and existing official Samtec datasheet URL are correct; the symbol numbering is correct but pin types/descriptions are missing. The footprint is critically invalid—approximately 1000× undersized and missing Ø1.04 mm plated-through holes—so I filed a part-quality report.
Full findings: Part Audit Report — SSW-112-01-G-S
Fix and verify part
Rebuild footprint
Update pin metadata
Add connector properties
Run review checks
1
Pin Number
1
12
Pin Number
12
7
Pin Number
7
9
Pin Number
9
6
Pin Number
6
5
Pin Number
5
4
Pin Number
4
2
Pin Number
2
11
Pin Number
11
10
Pin Number
10
3
Pin Number
3
8
Pin Number
8

Refine this doc
Ask about this doc
Part Audit Report — SSW-112-01-G-S
Scope
Reviewed available part metadata, the 12-terminal schematic symbol, PCB footprint, and the official Samtec documentation for SSW-112-01-G-S.
Authoritative sources
Available metadata

Table

FieldCurrent valueAssessment
MPNSSW-112-01-G-SCorrect
ManufacturerSamtecCorrect
Description12 Position, .100" Tiger Buy Socket StripFunctionally correct, but less specific than the official description
Part typeConnectorsCorrect but broad
SubtypeHeaders and Wire HousingsAcceptable
Pin count12Correct
Designator prefixJCorrect
MountSocketDescribes connector style, not mounting technology; official part is vertical through-hole
Datasheet URLhttp://suddendocs.samtec.com/catalog_english/ssw_th.pdfPresent and official; no update required
Package / case codeNot setMissing
Connector pitch/rows/positions/genderNot setMissing useful structured metadata
Key specifications
  • Connector: Tiger Buy socket-strip receptacle, vertical through-hole solder tail
  • Contacts: 12 positions, 1 row
  • Pitch: 2.54 mm (0.100 in)
  • Lead style: -01, 2.64 mm (0.104 in) tail
  • Plating option -G: 20 µin gold in contact area, 3 µin gold on tail
  • Body length: 30.99 ± 0.25 mm (1.220 ± 0.010 in)
  • Body width: 2.41 mm (0.095 in) reference
  • Body height: 8.51 mm (0.335 in)
  • Tail section: 0.79 × 0.41 mm (0.031 × 0.016 in), reference
  • Recommended footprint: 12 plated through-holes in one row, 2.54 mm pitch, Ø1.04 mm drill; pin 1-to-pin 12 span 27.94 mm
  • Contact material: phosphor bronze; black UL94 V-0 liquid-crystal-polymer insulator for the -S row option
  • Catalog rating: 4.7 A per pin with two pins powered; 465 VAC / 655 VDC; -55 °C to +125 °C for gold-plated variants
Schematic symbol cross-check
Correct
  • Exactly 12 terminals are present.
  • Terminal numbers 1 through 12 are present once each.
  • A passive 1×12 connector does not require unique signal names for each contact.
Mismatches / omissions
  • Every terminal has Pin Type = Unspecified. Connector contacts should normally be Passive.
  • No terminal has a useful Pin Description. Recommended descriptions are “Contact 1” through “Contact 12” (or equivalent).
  • The symbol is represented as independent terminal objects rather than a clearly bounded connector body. Electrically usable, but less readable and less obviously associated as one 12-position connector.
Footprint cross-check
Required by Samtec
  • 12 plated through-holes, single straight row
  • 2.54 mm pitch
  • Ø1.04 mm drill, typical
  • 27.94 mm center span from pin 1 to pin 12
  • Approximate body outline 30.99 × 2.41 mm
  • Pin-1 identification
Current footprint findings
  • 12 pad nodes exist and pin 1 is rectangular, which provides a pin-1 cue.
  • The reported pad centers are spaced 0.00254 mm, not 2.54 mm.
  • The reported end-to-end span is 0.02794 mm, not 27.94 mm.
  • Reported pad size is approximately 0.00195 mm, not a practical through-hole pad diameter.
  • No drill/hole-size property is present on the inspected pad nodes, so the required Ø1.04 mm plated holes are not defined.
  • No mechanical body outline or courtyard was found.
  • Reference/value silkscreen text is reported at a similarly incorrect scale and overlaps the footprint origin.
Severity: Critical. The footprint appears to be scaled approximately 1000× too small and lacks the required plated-through drill definition. It is not manufacturable or mechanically compatible with the connector as currently represented.
Overall verdict
  • Identity and pin count: Correct.
  • Datasheet: Already set to an official Samtec URL; no property update was necessary.
  • Symbol: Numbering is correct, but pin types and descriptions are incomplete.
  • Footprint: Critical mismatch; must be rebuilt or corrected before use.
  • Metadata: Core identity is correct, but package and connector-specific structured properties are incomplete.
  1. Rebuild the footprint at 2.54 mm pitch with 12 PTH pads and Ø1.04 mm drills.
  2. Choose a manufacturable copper pad diameter that provides adequate annular ring under the target fabricator’s rules; Samtec specifies the drill but not copper diameter in the referenced footprint drawing.
  3. Add the 30.99 × 2.41 mm nominal body outline, courtyard, and clear pin-1 marking.
  4. Set all symbol terminals to Passive and add “Contact N” pin descriptions.
  5. Add structured metadata: Through Hole mount, 2.54 mm pitch, 12 positions, 1 row, receptacle/socket gender, and a meaningful package/case label.

  • Scope

  • Authoritative sources

  • Available metadata

  • Key specifications

  • Schematic symbol cross-check

  • Correct

  • Mismatches / omissions

  • Footprint cross-check

  • Required by Samtec

  • Current footprint findings

  • Overall verdict

  • Recommended corrections

Documents

Assets

kicad_mod

SSW-112-01-G-S

RHDR12W79P0X254_1X12_3099X241X851P.kicad_modFootprint
svg

SSW-112-01-G-S

SSW-112-01-G-S Symbol.svgDefault
SSW-112-01-G-S-thumb.png

SSW-112-01-G-S-thumb.png

SSW-112-01-G-S-thumbThumbnail
SSW-112-01-G-S

SSW-112-01-G-S

SSW-112-01-G-S.stp3D Model

SSW-112-01-G-S

SSW-112-01-G-S thumbnail
12 Position Receptacle Connector 0.100" (2.54mm) Through Hole Gold
Female header connector designed for board-to-board or wire-to-board interconnection using a 2.54 mm (0.100") pitch through-hole interface. The SSW-112-01-G-S is a single-row, 12-position socket strip with gold-plated contacts, rated for 2.9 A per contact and 550 VAC RMS operating voltage, and supports an operating temperature range of -55°C to +125°C.
#Connector #Header #FemaleHeader #ThroughHole #Samtec

Properties

SSW-112-01-G-S

Samtec Inc.

Connectors

mm.digikey.com/Volume0/opasdata/d220001/medias/docus/6129/ssw-1xx-xx-xxx-x-xx-xxx-xx-mkt.pdf

J

Socket

parametric-v1

creativecommons.org/licenses/by/4.0/

Pricing & Availability

DPN

Stock

Qty 1

4

0–999

$2.51–$2.5809

1

1.3K

$2.49

4

40–1.3K

$2.4471–$2.5853

Controls