Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 8 sec
I’ll audit the part metadata, locate and attach the official Samtec datasheet if needed, then verify the symbol, footprint, and pin definitions against it and report any discrepancies.
Worked for 6 mins
Created a project doc
Part Audit — SSM-114-S-SV
The part is electrically and mechanically consistent with Samtec's official SSM series documentation for the exact ordering code SSM-114-S-S...
Audit complete. I attached the official Samtec datasheet and verified all 14 symbol terminals map correctly to the 14 footprint pads; pitch, pad geometry, numbering, and mounting configuration match the manufacturer drawing. No electrical or dimensional mismatch was found, but Part Type, Package, terminal descriptions, and a useful product description are missing; details are in Part Audit — SSM-114-S-SV.
Fix metadata and review
Fix metadata
Add terminal descriptions
Run quality review
Export part data
