Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 8 sec
I’ll audit the part metadata, locate and attach the official Samtec datasheet if needed, then verify the symbol, footprint, and pin definitions against it and report any discrepancies.
Worked for 6 mins
Created a project doc
Part Audit — SSM-114-S-SV
The part is electrically and mechanically consistent with Samtec's official SSM series documentation for the exact ordering code SSM-114-S-S...
Audit complete. I attached the official Samtec datasheet and verified all 14 symbol terminals map correctly to the 14 footprint pads; pitch, pad geometry, numbering, and mounting configuration match the manufacturer drawing. No electrical or dimensional mismatch was found, but Part Type, Package, terminal descriptions, and a useful product description are missing; details are in Part Audit — SSM-114-S-SV.
Fix metadata and review
Fix metadata
Add terminal descriptions
Run quality review
Export part data
Refine this doc
Ask about this doc
Part Audit — SSM-114-S-SV
Result
The part is electrically and mechanically consistent with Samtec's official SSM series documentation for the exact ordering code SSM-114-S-SV. No contact-count, numbering, pitch, land-pattern, mounting-feature, or symbol-to-pad mapping mismatch was found.
Official documentation
- Manufacturer: Samtec
- MPN: SSM-114-S-SV
- Official series drawing / datasheet: https://suddendocs.samtec.com/prints/ssm-1xx-xxx-xx-xx-xx-xx-x-xx-mkt.pdf
- The Datasheet property was initially absent and has now been set to this official Samtec URL.
Key specifications
- Connector type: single-row female socket strip
- Positions: 14
- Pitch: 2.54 mm (0.100 in)
- Mounting / termination: vertical surface mount (
-SV) - Contact system: Samtec Tiger Claw™ dual-wipe
- Plating (
-S): 30 µin selective gold in the contact area with matte-tin tails - Insulator: black LCP, UL 94 V-0
- Contact material: phosphor bronze
- Nominal body length: 35.56 mm
- Approximate insulator height: 7.37 mm
- Published series performance: up to 8 Gbps
- Compliance: RoHS, halogen-free, MSL 1
- The exact ordering code does not specify locking clips, polarization, pick-and-place pad, or bottom-entry options.
Existing metadata review
Table
| Field | Status | Finding |
|---|---|---|
| MPN | Correct | SSM-114-S-SV |
| Manufacturer | Correct | Samtec |
| Designator prefix | Correct | J is appropriate for a connector |
| Description | Deficient | Only SAMTEC; does not identify connector type, positions, pitch, plating, or mounting style |
| Datasheet | Updated | Official Samtec URL attached |
| Package | Missing | No package property is defined |
| Part Type | Missing | Reported as the remaining project-property warning |
| Dimensional properties | Missing | Dimensions exist in footprint geometry but not as explicit metadata |
Schematic symbol review
- Exactly 14 terminals, numbered
01through14. - Contact numbers are complete and unique.
- Each terminal has
Pin Type = Passive. - Pin-to-pad mapping is one-to-one: symbol terminal
01–14maps to footprint pad01–14. - Numeric contact names are acceptable because this is an unkeyed passive connector.
Symbol deficiencies
- Terminal descriptions are absent.
- The rendered symbol pin-table electrical-type field appears blank, although each underlying terminal property is set to
Passive.
Footprint review
- Exactly 14 rectangular SMD pads, numbered
01–14. - Pad-center pitch along X: 2.54 mm.
- Alternating/staggered termination rows match the recommended pattern.
- Pad size: approximately 1.02 × 1.905 mm (0.040 × 0.075 in).
- Row centers: approximately ±1.6025 mm.
- Overall pad-pattern height: approximately 5.11 mm.
- Pad-center span: 33.02 mm, equal to
(14 − 1) × 2.54 mm. - Fabrication body outline: approximately 35.56 × 2.54 mm.
- Courtyard: approximately 36.06 × 5.61 mm.
- A pin-1 marker is present adjacent to pad
01. - No mounting holes or locking-clip features are present, which is correct for this ordering code without
-LC. - A STEP model and imported KiCad footprint asset are present.
Mismatches and risks
Confirmed mismatches
No confirmed dimensional or connectivity mismatch was identified.
Metadata / quality issues to correct
- Add a meaningful Part Type such as
Connector, Socket Strip. - Replace the description with a complete description, for example:
14-position 2.54 mm pitch vertical SMT female socket strip, 30 µin selective gold. - Add a Package value that clearly identifies the 1×14, 2.54 mm vertical SMT socket-strip form.
- Add terminal descriptions if desired, e.g.
Contact 1throughContact 14. - Investigate why the symbol table does not display the electrical type even though terminal properties are
Passive; this appears to be a presentation/metadata consistency issue rather than an electrical mapping error.
Verification evidence
A direct project read confirmed all 14 terminal objects carry unique pin numbers and
Pin Type = Passive. A direct layout read confirmed 14 pads with designators 01 through 14. The audit did not modify symbol or footprint geometry.Result
Official documentation
Key specifications
Existing metadata review
Schematic symbol review
Symbol deficiencies
Footprint review
Mismatches and risks
Confirmed mismatches
Metadata / quality issues to correct
Verification evidence
