Pico 2 Part Audit
Worked for 4 mins 20 sec
The pin-number audit is complete: the 40 main pins and 3 SWD pads align with the official Pico 2 pinout, while metadata quality issues remain around pin descriptions/types, AGND naming, package info, and footprint geometry confidence.
Worked for 1 min 48 sec
Created a project doc
Completed the SC1631/Pico 2 part audit and created the detailed report here: SC1631 Part Datasheet Review.
Open items:
- Datasheet URL was already set, so I did not change it; the report notes the direct official Raspberry Pi URL.
- Pin numbering matches the official Pico 2 pinout, but pin descriptions/types are missing.
- AGND, test-point warnings, package metadata, and footprint geometry confidence need cleanup.
Suggested next steps:
- Add datasheet-backed pin descriptions and pin types to all 50 terminals.
- Rename or annotate pin 33 as AGND.
- Replace or supplement the uploaded datasheet URL with the direct official Raspberry Pi URL.
- Verify the footprint against the official Pico 2 CAD/STEP package.
Fix metadata and verify
Fix terminal metadata
Annotate AGND and TPs
Use official datasheet
Verify footprint geometry
