Pico 2 Part Audit
Worked for 4 mins 20 sec
The pin-number audit is complete: the 40 main pins and 3 SWD pads align with the official Pico 2 pinout, while metadata quality issues remain around pin descriptions/types, AGND naming, package info, and footprint geometry confidence.
Worked for 1 min 48 sec
Created a project doc
SC1631 Part Datasheet Review
Date: 2026-07-12 Project: SC1631
View docCompleted the SC1631/Pico 2 part audit and created the detailed report here: SC1631 Part Datasheet Review.
Open items:
- Datasheet URL was already set, so I did not change it; the report notes the direct official Raspberry Pi URL.
- Pin numbering matches the official Pico 2 pinout, but pin descriptions/types are missing.
- AGND, test-point warnings, package metadata, and footprint geometry confidence need cleanup.
Suggested next steps:
- Add datasheet-backed pin descriptions and pin types to all 50 terminals.
- Rename or annotate pin 33 as AGND.
- Replace or supplement the uploaded datasheet URL with the direct official Raspberry Pi URL.
- Verify the footprint against the official Pico 2 CAD/STEP package.
Fix metadata and verify
Fix terminal metadata
Annotate AGND and TPs
Use official datasheet
Verify footprint geometry
Refine this doc
Ask about this doc
SC1631 Part Datasheet Review
Date: 2026-07-12
Project: SC1631
Part UID: 9ef99fc5-2bf2-4b5e-96fa-2175b20e9952
Scope
Reviewed the published Flux component for Raspberry Pi SC1631 / Raspberry Pi Pico 2 against official Raspberry Pi documentation. The audit covered available project metadata, schematic terminals, footprint information, assets, and pin descriptions.
Sources used
- Current project metadata and schematic/PCB data in Flux.
- Existing project
Datasheet URL:https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/9c027664c466e4fcf493244f01952f694cfed8688043cdfb0fad1c632ac42cb2.pdf - Official Raspberry Pi Pico 2 datasheet:
https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf - Raspberry Pi Product Information Portal for Pico 2 assets:
https://pip-assets.raspberrypi.com/categories/1005-raspberry-pi-pico-2 - Official Product Information Portal direct document noted during web search:
https://pip-assets.raspberrypi.com/categories/1005-raspberry-pi-pico-2/documents/RP-008299-DS-2-pico-2-datasheet.pdf - Official Pico 2 pinout PDF noted during web search:
https://pip-assets.raspberrypi.com/categories/1005-raspberry-pi-pico-2/documents/RP-008301-DS-1-Pico-2-Pinout.pdf
Note: The project already had a Datasheet URL set, so no Datasheet property update was required by the user's rule. The existing URL appears to be an uploaded copy of the Pico 2 datasheet; for source traceability, the direct official Raspberry Pi URL should be preferred if the library policy allows replacing uploaded copies with official URLs.
Available project part information
Table
| Field | Project value | Datasheet / official value | Status |
|---|---|---|---|
| Manufacturer Part Number | SC1631 | SC1631 | Match |
| Manufacturer Name | Raspberry Pi | Raspberry Pi Ltd / Raspberry Pi | Match |
| Description | Single Board Computers Pico 2 pairs RP2350 with 4MB of on-board QSPI Flash memory | Raspberry Pi Pico 2 board with RP2350, 4 MB onboard QSPI flash | Match |
| Datasheet URL | Uploaded PDF URL set | Official Pico 2 datasheet available from Raspberry Pi | Acceptable, but official direct URL preferred |
| Designator Prefix | U | Module/board used as IC-like schematic symbol | Acceptable |
| Part Type | Integrated Circuits | Microcontroller board/module, not a bare IC | Mismatch / metadata improvement |
| Package | Not set in project properties | Raspberry Pi Pico 2 module, 51 mm x 21 mm, 2.54 mm pitch castellated/through-hole format | Missing |
| Schematic terminals | 50 Terminal components | 40 main edge pins + 3 SWD debug pads + 7 test points = 50 externally modelled pads | Match |
| BOM items | 0 | Expected for a published component/part project | Acceptable |
| Assets | 1 symbol SVG; no footprint or 3D asset flagged | Official CAD/STEP assets are available from Raspberry Pi | Missing optional asset coverage |
Key official specifications
Table
| Parameter | Official value |
|---|---|
| Product | Raspberry Pi Pico 2 |
| Order code / MPN | SC1631 |
| Variant with headers | SC1632 |
| MCU | RP2350A |
| CPU | Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors |
| Clock | 150 MHz |
| SRAM | 520 KB |
| Flash | 4 MB onboard QSPI flash |
| External GPIO | 26 multipurpose GPIO pins; 3 external ADC-capable GPIOs GP26-GP28 plus internal ADC use |
| Interfaces | 2 x UART, 2 x SPI, 2 x I2C, USB 1.1 host/device, PWM, PIO |
| Input power | 1.8 V to 5.5 V DC on VSYS path per datasheet summary |
| Regulated output | 3V3(OUT), board regulated 3.3 V rail |
| Operating temperature | -20 C to +85 C |
| Physical size | 21 mm x 51 mm |
| Main pin pitch | 2.54 mm |
| Main pin rows | 40 edge pins, 20 per side |
| Debug pads | 3 SWD pads: SWCLK, GND, SWDIO |
| Test points | TP1-TP7, functions listed below |
| Production lifetime | Until at least January 2040 per datasheet |
Schematic symbol and pinout check
40-pin edge connector
The project terminal designators and pin numbers align with the official Pico 2 40-pin pinout:
Table
| Pins | Project representation | Official mapping | Status |
|---|---|---|---|
| 1-2 | GP0, GP1 | GP0, GP1 | Match |
| 3 | GND_1 | GND | Match, but label is instance-style rather than signal-style |
| 4-7 | GP2-GP5 | GP2-GP5 | Match |
| 8 | GND_2 | GND | Match, but label is instance-style |
| 9-12 | GP6-GP9 | GP6-GP9 | Match |
| 13 | GND_3 | GND | Match, but label is instance-style |
| 14-17 | GP10-GP13 | GP10-GP13 | Match |
| 18 | GND_4 | GND | Match, but label is instance-style |
| 19-22 | GP14-GP17 | GP14-GP17 | Match |
| 23 | GND_5 | GND | Match, but label is instance-style |
| 24-27 | GP18-GP21 | GP18-GP21 | Match |
| 28 | GND_6 | GND | Match, but label is instance-style |
| 29 | GP22 | GP22 | Match |
| 30 | RUN | RUN | Match |
| 31 | GP26 | GP26 / ADC0 / A0 | Match, but missing ADC pin description |
| 32 | GP27 | GP27 / ADC1 / A1 | Match, but missing ADC pin description |
| 33 | GND_7 | AGND | Functional ground match, but symbol label should identify AGND distinctly |
| 34 | GP28 | GP28 / ADC2 / A2 | Match, but missing ADC pin description |
| 35 | ADC_VREF | ADC_VREF | Match |
| 36 | 3V3(OUT) | 3V3 / 3V3(OUT) | Match |
| 37 | 3V3_EN | 3V3_EN | Match |
| 38 | GND_8 | GND | Match, but label is instance-style |
| 39 | VSYS | VSYS | Match |
| 40 | VBUS | VBUS | Match |
SWD debug pads
Table
| Project terminal | Project pin number | Official function | Status |
|---|---|---|---|
| SWCLK | D1 | SWCLK | Match |
| GND_9 | D2 | GND | Match, but label is instance-style |
| SWDIO | D3 | SWDIO | Match |
TP1-TP7 test points
The project includes TP1 through TP7 with pin numbers TP1 through TP7. The presence/count matches the datasheet, but the symbol does not currently expose signal/function descriptions.
Table
| Test point | Official function | Status in project |
|---|---|---|
| TP1 | Ground; close-coupled ground for USB differential signals | Terminal exists; description missing |
| TP2 | USB DM / D- | Terminal exists; description missing |
| TP3 | USB DP / D+ | Terminal exists; description missing |
| TP4 | GPIO23 / SMPS PS; do not use externally | Terminal exists; warning description missing |
| TP5 | GPIO25 / LED; not recommended for external use | Terminal exists; warning description missing |
| TP6 | BOOTSEL; short low at power-up for USB mass-storage programming mode | Terminal exists; description missing |
| TP7 | 1V1; do not use externally | Terminal exists; warning description missing |
Pin property quality check
All 50 terminals are currently modelled as generic
Terminal components. The pin numbers are mostly correct, but each terminal shows:Pin Type: Unspecified- No
Pin Descriptionproperty - No explicit electrical role such as Power In, Power Out, Ground, Digital, Analog, USB, Reset/Input, or Not Recommended / Do Not Use
Recommended terminal metadata improvements:
Table
| Terminal group | Suggested metadata |
|---|---|
| GP0-GP22, GP26-GP28 | Pin Type: Digital or Bi-Directional; Pin Description should include alternate UART/I2C/SPI/ADC functions from the official pinout |
| GP26-GP28 | Include ADC0/ADC1/ADC2 in Pin Description |
| GND pins | Pin Type: Ground; pin labels or descriptions should indicate GND |
| Pin 33 | Label/description should explicitly say AGND, not only GND_7 |
| VBUS, VSYS | Pin Type: Power In; include voltage/use notes |
| 3V3(OUT) | Pin Type: Power Out; include regulated 3.3 V output note |
| 3V3_EN, RUN | Pin Type: Input / System Control; include function notes |
| ADC_VREF | Pin Type: Power In / Analog reference; include ADC reference description |
| SWCLK, SWDIO | Pin Type: Digital / Debug; include SWD function |
| TP1-TP7 | Add official test point functions and external-use warnings |
Footprint / PCB geometry check
Observed from current Flux layout:
- PCB node count includes 50 pad nodes corresponding to the modelled terminals.
- Main header pad sequence and pitch are consistent with 2.54 mm spacing when interpreting layout coordinates at the normal mm scale.
- Main rows appear at approximately +/-9.69 mm pad centers for the carrier-board pad geometry, while the official Pico-family through-hole row spacing is 17.78 mm between hole centers.
- The active silk outline visible in the flat footprint view appears approximately 24.58 mm x 55.10 mm, larger than the official physical board size of 21 mm x 51 mm.
- The footprint includes four mount pads/nodes numbered 41-44, which likely correspond to the Pico mounting holes, but detailed diameter/position verification was not possible from the current tree output alone.
- Only a symbol SVG is listed as a project asset; no footprint asset or official 3D model asset is attached/flagged. Raspberry Pi provides official STEP/CAD assets for Pico 2.
Interpretation:
- The footprint may intentionally use larger carrier-board SMT/castellated land pads and a courtyard-like outline rather than the actual module body outline. If so, the larger outline and wider pad centers should be documented.
- If the active silk is intended to represent the physical module body, it does not match the official 21 mm x 51 mm body size and should be corrected.
- For a library-grade SC1631 component, the footprint should be verified against the official mechanical drawing/CAD/STEP package, especially pad centers, hole positions, USB connector keepout/protrusion, and body outline.
Mismatches and gaps to fix
Table
| Severity | Issue | Evidence | Recommended action |
|---|---|---|---|
| High | Pin descriptions are missing for all terminals | Schematic properties show no Pin Description; TP and alternate functions absent | Add datasheet-backed Pin Description to every terminal |
| High | Pin types are all Unspecified | All terminals show Pin Type: Unspecified | Set power, ground, digital, analog/reference, reset/control, and debug pin types |
| Medium | Pin 33 is labelled GND_7 although datasheet calls it AGND | Official pin 33 is AGND | Rename terminal or add explicit AGND description/type |
| Medium | Part Type is Integrated Circuits, but SC1631 is a complete module/board | Project properties vs datasheet | Change to a module/connector/microcontroller-board category if supported by Flux taxonomy |
| Medium | Package property is missing | Project properties do not list Package | Add package/form-factor metadata: Raspberry Pi Pico 2 module, 51 mm x 21 mm, 2.54 mm pitch, castellated/through-hole |
| Medium | Datasheet URL points to uploaded copy rather than direct official Raspberry Pi URL | Project has storage URL; official URL found | Optional: replace with https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf or add official reference URL |
| Medium | Footprint geometry confidence is incomplete | Layout tree/flat view suggests larger outline than official body and no official footprint asset | Verify against official STEP/CAD and document whether outline is courtyard/land pattern or physical body |
| Low | No official 3D/CAD asset attached | Assets list only SC1631 Symbol.svg | Add official STEP asset if library part should support 3D/mechanical review |
| Low | GND terminals use unique instance names GND_1...GND_9 | Symbol designators are instance-style | Acceptable in Flux terminal modelling, but signal-style descriptions should reduce ambiguity |
Overall assessment
The component correctly identifies SC1631 and captures the expected 50 externally modelled pads: 40 main Pico 2 pins, 3 SWD pads, and 7 test points. The core pin numbering aligns with the official Raspberry Pi Pico 2 datasheet.
The main problems are metadata quality and footprint confidence, not missing pins: pin descriptions/types are absent, AGND is not distinguished, the part is categorized as an IC rather than a module/board, package/form-factor metadata is missing, and the footprint should be checked against official mechanical/CAD data before relying on it for carrier-board layout.
Scope
Sources used
Available project part information
Key official specifications
Schematic symbol and pinout check
40-pin edge connector
SWD debug pads
TP1-TP7 test points
Pin property quality check
Footprint / PCB geometry check
Mismatches and gaps to fix
Overall assessment
