I’ll review the part metadata, find and attach the official datasheet if needed, then compare pins/symbol/footprint against the datasheet and report mismatches.

Reviewed the NJW1194V-TE1 part against the official Nisshinbo datasheet and created the full report here: Part Review: NJW1194V-TE1.

Key findings: all 32 pin numbers/names match the datasheet, but the project package metadata says TO while the datasheet specifies SSOP32, the description’s -40 ~ +125 appears to be storage temperature rather than operating temperature, and pin descriptions/types are not fully populated. Suggested next steps: correct the package metadata to SSOP32, update the description temperature wording, and populate Pin Description / Pin Type properties from the datasheet.

I’ll read the attached instruction file, then apply its requested checks/updates and verify the result.

Read the attachment and created the requested terminal-order/section tables here: Terminal Order / Section Table: NJW1194V-TE1.

Short check: all existing terminal names are OK, no required renames, and no uncertain pins found; Power is first and Ground is last as instructed.