Audit complete. The datasheet URL was already the official onsemi PDF, and the six-pin mapping is correct; key issues are incorrect package metadata (TO vs SC-88), unspecified pin types/descriptions, incorrect AND-function classification, and a critical apparent 1000× footprint scaling error. I filed an internal part-quality report and documented full specs and findings in NC7WZ07P6X Part Audit.

I’ll correct the source footprint geometry from the official SC-88 land pattern, then export/read back the manufacturing data to confirm the pad sizes and pitch numerically.

Repaired the SC-88 footprint to the official onsemi land pattern and verified the Gerber export:

The apparent 1000× scale issue was a meter-versus-millimeter display interpretation; exported dimensions are now correct. A fresh Gerber package was generated and is available above.